What are the differences between Porsche 718 and Porsche 911?

2 Answers
Marley
07/29/25 1:28am
The differences between Porsche 718 and 911 are: 1. Different body structures: The Porsche 718 is a 2-door, 2-seater soft-top convertible; the Porsche 911 is a 2-door, 4-seater hard-top sports car. 2. Different power systems: The Porsche 718 is equipped with a 2.5T turbocharged engine and a 7-speed dual-clutch transmission; the Porsche 911 is equipped with a 3.0T twin-turbocharged engine and an 8-speed dual-clutch transmission. 3. Different body dimensions: The Porsche 718 measures 4379mm in length, 1801mm in width, 1272mm in height, with a wheelbase of 2475mm; the Porsche 911 measures 4519mm in length, 1852mm in width, 1298mm in height, with a wheelbase of 2450mm. 4. Different drive systems: The Porsche 718 features a mid-engine, rear-wheel drive layout; the Porsche 911 features a rear-engine, rear-wheel drive layout.
Was this review help?
5
1
Share
AmeliaRose
08/12/25 5:34am
The main differences between the Porsche 718 and 911 lie in performance. The 718 features a mid-engine layout, with a centralized center of gravity, offering agile and stable handling during turns—especially for city driving or winding mountain roads—and typically delivers 300-400 horsepower. The 911, with its rear-engine design, packs more power, with Turbo or GT models exceeding 500 horsepower. Its acceleration feels like being pushed forward, making high-speed driving exhilarating, though it requires skill to manage potential oversteer. Having driven both models multiple times, I find the 718 more approachable in handling, while the 911's explosive power suits experienced drivers better. As for fuel consumption, the 911 is slightly thirstier, but both remain reasonable—the 718 is more hassle-free for daily driving.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

Where is the air conditioning filter of Haima M3 located?

Haima M3 air conditioning filter is located behind the glove compartment. Remove the glove compartment, and there is a baffle behind it. After removing the baffle, you can see the position of the air conditioning filter. The removal method of Haima M3 air conditioning filter is as follows: 1. There is a black plastic panel on the upper part of the passenger footwell, with two retractable clips on it. Bend them to remove the panel. 2. Disconnect the negative terminal of the battery, then remove the body computer and the bracket fixing the body computer. 3. There are four screws on the left side of the passenger seat, which can be removed to take it out. Here are some additional details: 1. Haima M3 is an A-class sedan newly developed by Haima Motors. It was developed by Haima Motors Shanghai R&D Center over three years and is a stylish and elegant compact family car.
19
1
Share

What is the actual fuel consumption of the Trumpchi GS7?

The fuel consumption of the GAC Trumpchi GS7 is 8.6-8.9L/100km. Below are the specific details of the GAC Trumpchi GS7: 1. Versions: It offers both 1.8T and 2.0T powertrain options, with the 2.0T high-end model equipped with an on-demand four-wheel drive system. 2. Interior Design: The GS7 features minor adjustments based on the GS8, with a more ergonomic layout. 3. Powertrain: In addition to the 2.0T engine, the Trumpchi GS7 also introduces a new 1.8T engine. The 2.0T engine delivers a maximum power of 148kW at 5200rpm and a maximum torque of 320Nm between 1750-4000rpm, paired with a 6-speed automatic transmission.
11
1
Share

Where is the motorcycle air intake hole located?

Different motorcycles have varying positions and forms of air intake holes on their fuel tanks. Here are the specific details: 1. Some have ventilation holes on the fuel tank cap, while others have dedicated tubes on the fuel tank for ventilation—it depends on the specific model. 2. If there is no dedicated ventilation tube on the fuel tank upon inspection, then it is located on the fuel tank cap. Here is some additional information: 1. Introduction: The fuel tank is a specialized container in the hydraulic system used to store hydraulic oil or fluid. 2. Classification: Fuel tanks can be divided into two types: open tanks and closed tanks. 3. Purpose: In addition to storing oil, the fuel tank also serves functions such as heat dissipation, separating air bubbles from the oil, and settling impurities. The fuel tank is equipped with many auxiliary components, such as coolers, heaters, air filters, and liquid level gauges.
9
2
Share

How Long Does It Take to Recharge a Dead Car Battery to Restart?

It takes between 1 to 20 hours to recharge a dead car battery, depending on the remaining charge: 1. If the engine can start smoothly, the battery must have at least 50% charge left, requiring 1 to 2 hours for a full charge; 2. If idling, it will take 2 to 3 hours; 3. When the battery is severely depleted, a portable charger should be used immediately, requiring up to 20 hours for a full charge. A fully charged battery can be identified by the following signs, or by observing the charge indicator turning green: 1. A large number of bubbles appear in the battery, creating a 'boiling' effect; 2. The terminal voltage rises to its maximum and does not increase further within two hours; 3. The electrolyte level rises to its highest point and does not increase further within two hours.
1
3
Share

What is the maximum number of cylinders in an engine?

12 cylinders. Common cylinder counts for automotive engines include 3, 4, 6, 8, 10, and 12 cylinders. Meaning of L4: L4 stands for inline 4-cylinder. The inline layout is the most widely used cylinder arrangement today, especially in engines with displacements below 2.5L. In this layout, all cylinders are aligned in the same angle and arranged in a single plane, sharing only one cylinder head. The engine block and crankshaft structure are relatively simple, resembling cylinders standing in a single file. Common cylinder counts: Specifically, common types include L3, L4, L5, and L6 (the number represents the cylinder count). The advantages of this layout include compact size, high stability, good low-speed torque characteristics, and lower fuel consumption, which also implies lower manufacturing costs.
5
3
Share

Where is the oil dipstick for the Audi Q5?

Audi Q5 uses an electronic oil dipstick. Turn on the ignition switch, press the CAR button, and you will find the engine oil level under the maintenance section. Below is additional information: 1. The Audi Q5 adopts the previous generation of Audi's family design. The inverted trapezoidal grille features large-sized rectangular grids, and the headlight design is relatively square. The overall body lines are mainly rounded, exuding a strong sense of power, and the generous and stable styling is more easily accepted. 2. The center console is tilted towards the driver's side, accommodating more drivers' operations. The functional areas are neatly arranged and clearly defined, with buttons and knobs of superior quality. In terms of configuration, the Audi Q5 provides comprehensive safety and comfort equipment. For passive safety, it offers full-size airbags and front seat side airbags. For active safety, it is equipped with systems such as lateral driving assistance and hill-start assist to enhance driving safety.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.