What are the differences between overtaking and lane changing?

How Often Should the Tensioner Pulley Be Replaced?

The tensioner pulley is generally replaced every 2 to 3 years or after driving approximately 60,000 to 70,000 kilometers. The tensioner pulley is usually replaced together with the timing belt. More relevant information is as follows: 1. The tensioner pulley is a belt tensioning device used in the automotive transmission system. It mainly consists of a fixed housing, tensioning arm, wheel body, torsion spring, rolling bearing, and spring bushing. It can automatically adjust the tension according to the different tightness levels of the belt, ensuring the transmission system is stable, safe, and reliable. 2. The tensioner pulley is a wear-prone part in automotive components. Over time, the belt can easily stretch. Additionally, with the tensioner pulley, the belt operates more smoothly, reduces noise, and prevents slipping.

15

1

Share

How long should a beginner practice driving before going on the highway?

According to legal regulations, new drivers can only drive on highways independently one year after obtaining their driver's license. More relevant information is as follows: 1. If the driver's license has been valid for less than one year, the driver must be accompanied by a driver who has been driving on highways for more than three years. During the probationary period, the probationary driver must display a probationary sign on the vehicle. Otherwise, they will be penalized. Drivers in the probationary period are not allowed to drive buses, commercial passenger vehicles, or vehicles such as police cars and fire trucks on duty. 2. According to Article 75 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses': When a probationary driver operates a motor vehicle on a highway, they must be accompanied by a driver who has held a driver's license for the corresponding or higher vehicle category for more than three years.

5

2

Share

What does 5w30 mean in engine oil?

In engine oil 5w30, W stands for winter, 5 represents the ability to withstand external low temperatures of -30°C, and 30 indicates the kinematic viscosity standard at 100 degrees Celsius is 30. Here is an introduction to engine oil classification: 1. The winter oil grades for engine oil viscosity classification are: 0W, 5W, 10W, 15W, 20W, 25W. The symbol W represents winter, and the smaller the number before W, the lower the low-temperature viscosity, the better the low-temperature fluidity, and the lower the applicable minimum temperature. 2. The summer oil grades for engine oil viscosity classification are: 20, 30, 40, 50. This number represents the stability of the oil at high temperatures, and the larger the number, the better the stability of the oil at high temperatures.

20

1

Share

What does mph mean on a car?

mph stands for mile-per-hour, which means miles per hour, commonly referred to as 'mile' in terms of car speed. 1 mile = 1.609344 kilometers per hour. Generally, cars that use miles per hour as the speed unit are foreign cars, imported cars introduced for domestic sales, or joint-venture brand cars. Domestic cars use kilometers per hour as the speed unit. If driving a car with miles per hour as the speed unit on the mainland, the driver needs to constantly pay attention to the speedometer, otherwise it is easy to exceed the speed limit.

14

5

Share

How Long is Defined as Inventory Car?

Vehicles that remain unsold for more than three months or half a year after leaving the factory are referred to as inventory cars. Below is relevant information: 1. The term 'inventory car' is a designation within the automotive sales industry, referring to new vehicles that have not been sold for an extended period after leaving the factory. There are no national regulations specifying how many months define an inventory car, but the industry generally considers vehicles unsold for more than three months or half a year as inventory cars. 2. Due to factors like the popularity of certain models or dealerships' stockpiling, most consumers actually receive new cars that have been in inventory for several months. Therefore, the concept of an 'inventory car' is hard to establish in practical scenarios. Generally, after receiving a vehicle, consumers should primarily check whether the manufacturing date is distant and ensure the car is in good condition.

10

2

Share

Is Car Film Applied on the Inside or Outside?

Car film should be applied on the inside of the car glass. Applying it on the inside makes it less prone to scratches and helps protect the occupants. Additionally, applying it on the inside extends its lifespan, as the film is less exposed to external disturbances and weather conditions, ensuring a more secure adhesion without issues like peeling corners. Below is an introduction to car film: 1. Car film involves applying a thin layer of material, also known as solar film or heat-insulating and explosion-proof film, to the front and rear windshields, side windows, and sunroof of a vehicle. 2. Its primary functions include blocking ultraviolet rays, reducing heat, and preventing injuries caused by sudden glass shattering. It also provides privacy protection due to its one-way visibility feature. 3. It further minimizes damage to both the car's interior items and passengers caused by UV radiation.

2

Share

What are the differences between overtaking and lane changing?

How Often Should the Tensioner Pulley Be Replaced?

How long should a beginner practice driving before going on the highway?

What does 5w30 mean in engine oil?

What does mph mean on a car?

How Long is Defined as Inventory Car?

Is Car Film Applied on the Inside or Outside?

Must I Buy a New Car After Winning the Tianjin License Plate Lottery?

What are the body dimensions of the FAW-Volkswagen 2021 Tacqua?

How long after a high-temperature warning does engine seizure occur?

What Causes a Car to Jump Out of Gear?