What are the differences between Nissan X-Trail Intelligent Comfort Edition and Comfort Edition?

How deep does water need to be to affect a car?

Water as shallow as 20 centimeters can affect some cars, while for vehicles with higher ground clearance, water up to 30 centimeters deep may cause issues. Water can backflow into the engine through the exhaust pipe, leading to stalling or even engine damage. When driving through flooded roads, it's advisable to use a low gear and proceed slowly. A crucial reminder: never lift your foot off the accelerator when crossing waterlogged areas, as this can create strong suction in the exhaust system that normally expels gases during acceleration, potentially drawing water into the engine. Here are some additional tips: 1. Towing assistance: If your car gets flooded, do not attempt to restart it as insurance won't cover such damage. It's best to call for towing service. 2. Check license plates: Verify if your license plates have been washed away. 3. Contact your insurer: Immediately notify your insurance company to file a claim, follow their procedures, and ensure you report the incident within 24 hours. 4. Prompt repairs: Arrange for repairs as soon as possible after water exposure. 5. Avoid restarting: If your engine stalls during water crossing, never attempt to restart it.

16

1

Share

What to Do When You Have No Cash at a Highway Toll Station?

Here are the solutions when you have no cash at a highway toll station: 1. Exchange cash via electronic transfer: If you don't have cash, electronic transfer is also acceptable. 2. Pledge items at the toll station: You can pledge important documents such as your driver's license or ID card. After pledging these documents, the toll station will let you pass, and you can retrieve them upon paying the cash later. 3. Call your insurance company: Insurance companies often provide free services within a certain range, such as roadside assistance, fuel delivery, or tire replacement. You can also exchange for cash when receiving these services from your insurer.

20

4

Share

Can license plates be transferred to a used car?

License plates can be transferred to a used car. After the original owner has used the license plates for more than 3 years, they can apply to retain the license plate number for six months when selling or transferring the vehicle. During this period, if the original owner purchases a used car, they can apply to use the previous license plate number. The following are the conditions that must be met to apply for the use of the original motor vehicle license plate number: 1. The application must be submitted within six months after the transfer or cancellation of registration; 2. The original motor vehicle must have been owned by the applicant for more than three years; 3. All traffic violations and accident-related issues involving the original motor vehicle must be resolved.

9

2

Share

What are the penalties and point deductions for driving without a driver's license?

No points will be deducted, but a fine may be imposed, and the traffic police may generally detain the vehicle, depending on the specific circumstances. Here is more relevant information: 1. Penalties for driving without a driver's license: If the driver provides the license: In the absence of other traffic violations, a fine ranging from 20 to 200 yuan will be imposed, 1 point will be deducted, and the vehicle will be returned. If the driver provides the license but has other traffic violations: Penalties will be imposed based on the circumstances along with the penalty for not carrying the license, and the vehicle will be returned. If the driver cannot provide the license: Penalties for driving without a license will apply, including a fine ranging from 200 to 2000 yuan and detention for up to 15 days. 2. If you don't have your driver's license, you can present the 12123 electronic driver's license: Presenting the 12123 electronic driver's license is also recognized by traffic police, but it is only applicable in certain regions where electronic licenses are enabled. If the region has not enabled electronic licenses, the original driver's license must be provided.

15

2

Share

What to Do About Severe Jerking During Buick LaCrosse Acceleration?

Here are solutions for severe jerking during Buick LaCrosse acceleration: 1. Adjust Shift RPM: The shifting method involves first increasing the RPM to 2000 before shifting. For some models, the torque output at this RPM may be relatively too high for the power required by the moving vehicle, potentially causing jerking. Therefore, it's necessary to moderately reduce the engine RPM during shifting, such as shifting at 1500 RPM. For large-displacement engines or those with good low-RPM torque, shifting can even be done at low RPMs of 1000-1200 without causing jerking, with minimal impact on acceleration. So, if you frequently experience jerking during shifts, try adjusting (lowering) the engine RPM during shifting to find a level that allows smooth gear engagement without affecting continued acceleration. 2. Adjust the Gear Engagement Sequence to a Progressive Style: Progressive shifting means following the sequence 1-2-3-4-5. In certain situations, using a skip-shift method can also avoid jerking, such as shifting directly from 2nd gear at 2000 RPM to 4th gear, or from 3rd gear to 5th gear. This is based on the principle that the front-end torque output of the powertrain roughly matches the rear-end torque demand, and it is often used more during acceleration on highways or flat roads.

12

3

Share

What does cylinder head contact mean?

Engine cylinder head contact occurs when the connecting rod is too long due to excessive clearance, causing it to hit the engine cylinder during operation, which is referred to as cylinder head contact. If an engine experiences cylinder head contact, it usually means the engine is scrapped. Additional details are as follows: Causes of cylinder head contact: When there is an issue with the connection between the piston and connecting rod, such as excessive clearance, the piston may exceed its normal operating trajectory, directly hitting the cylinder head. A dropped timing chain or belt, or a broken crankshaft pin, can also cause cylinder head contact, known as timing jump. This happens when the timing belt has been in use for too long or exceeds its service life, the tension adjustment device fails, or the timing belt and timing gear do not fit tightly, creating a gap. Valve issues can also lead to cylinder head contact, such as a stuck valve stem, broken intake or exhaust spring, or a valve falling into the cylinder. During repairs, using incorrect piston sizes, overly thick connecting rod bearings or shims, or a damaged cylinder block surface can also cause the piston top to be too high.

1

5

Share

What are the differences between Nissan X-Trail Intelligent Comfort Edition and Comfort Edition?

How deep does water need to be to affect a car?

What to Do When You Have No Cash at a Highway Toll Station?

Can license plates be transferred to a used car?

What are the penalties and point deductions for driving without a driver's license?

What to Do About Severe Jerking During Buick LaCrosse Acceleration?

What does cylinder head contact mean?

Is a Wheel Alignment Necessary When Replacing New Tires?

How to choose between C260 and C200L?

Where is the headlight relay of Volkswagen Lavida located?

Do new cars still need a break-in period?