What are the differences between Maybach Mercedes and S-Class?

What causes the sunroof rattle in Volkswagen CC?

The causes of sunroof rattle in Volkswagen CC are as follows: Sunroof seal or rubber gasket aging: The sunroof sealing strip, being constantly exposed to rain or sunlight, is prone to aging. Rubber conditioner can temporarily restore the performance of the seal. Open the sunroof fully and spray the conditioner onto the sealing strip. Of course, a more direct solution is to replace the sunroof seal. Loose sunroof screws: Loose screws can cause rattling in the headliner and sunroof, and may even pose a risk of the sunroof detaching. The solution is simple: locate the sunroof screws and tighten them. Dust particles in the sunroof track: With repeated opening and closing of the sunroof, dust inevitably accumulates in the track gaps. When enough dust builds up, friction occurs during operation, leading to rattling. The dust can be removed with a cloth, and regular maintenance is essential.

11

5

Share

How to Spray Car Paint?

Here is the introduction to car paint spraying methods: 1. First, use a blow gun (spray gun) to dry the water in the car gaps—cover areas not to be painted with newspaper—then start mixing the paint. 2. For 1K paint, the mixing ratio is 1/2; for 2K paint, the ratio is 4/2/1.5. After mixing, pour the paint into the spray gun using a funnel (to filter out impurities)—then pick up the spray gun and a dust cloth, blowing and wiping the area to be painted (the surface must be clean and smooth) to achieve a good paint finish. 3. 1K paint spraying method: Move the gun evenly, first covering the prepared surface with two even coats—then spray from the bottom up in a 2/1 pattern—apply layer by layer, ensuring each layer dries before the next—after each layer, wipe with a dust cloth (the paint surface tends to get dirty or rough), repeating until the original paint color is covered—then clean with a dust cloth—and apply clear coat. 4. Clear coat spraying is slightly more complicated than 1K paint because excessive application can cause runs. Generally, apply two coats: the first lightly, the second for a glossy finish, still spraying from the bottom up. The first coat should be misty, moving the gun in a 3/1 pattern, then let it dry briefly before applying the second coat in a 3/2 pattern for gloss. 5. 2K paint spraying method: Move the gun evenly, first applying two thin coats over the putty and letting it dry—then spray two even coats from the bottom in a 3/1 pattern and let dry—since 2K paint is inherently glossy, no clear coat is needed—finally, apply 2K paint in a 2/1 pattern for an even glossy finish.

1

4

Share

What is the function of the car engine fault light indicator?

The function of the car engine fault light indicator is to display the working condition of the vehicle's engine. When the key is turned on during the vehicle's self-check, this indicator light will illuminate and then automatically turn off. If it remains lit, it indicates that the vehicle's engine has a fault that requires inspection and repair. How to handle when the car engine fault light is on: After the engine fault light comes on, first pay attention to whether the engine is running normally, whether there is shaking, black smoke emission, or difficulty starting, etc. If any of these issues exist, try not to start the engine again. If the engine is running normally and the vehicle can be driven, please go to a service station as soon as possible to identify the cause. The reason for the fault light being on can be easily confirmed by connecting a portable diagnostic device at the service station, which can read the fault code and obtain fault information for targeted repair. If the engine is running normally, the owner can also try gently plugging in various wiring harness connectors, as it may be caused by a loose connection somewhere, or repeatedly turning the key to the ON position to see if the light can be turned off.

18

3

Share

How many years of history does BMW have?

BMW was founded in 1916 and has a history of more than 90 years. Introduction to BMW: BMW is the abbreviation of Bayerische Motoren Werke AG, founded in Munich, Germany in 1916, appearing younger compared to Fiat, Ford, Renault, and Rolls-Royce. However, in the 1930s, it produced the world's best sports cars and luxury sedans, recovering from the destruction of World War II and the financial recession of the 1950s. BMW's Development History: In 1922, BMW developed its first motorcycle engine. Although it was not adopted, it set an important direction for the company. Later, at the Victoria-Werke factory in Nuremberg, they produced a 500ml air-cooled horizontally opposed twin-cylinder motorcycle engine designed by Max Friz, which was installed on the revolutionary R-32 motorcycle. Its power was transmitted to the rear wheel via a driveshaft instead of a chain. The R-32 set the template for the classic BMW motorcycles. In 1924, BMW launched the R-32 into the market, and it quickly achieved success.

20

2

Share

Can BMW ConnectedDrive Start the Car Remotely?

BMW ConnectedDrive can start the car remotely, but a key is still required to drive. How to Use BMW's Remote Start Feature: Using the traditional remote key, press the lock button three times in a row to start the car remotely. Remote car start allows the engine or motor to be activated via the remote key without needing someone to enter the vehicle. The principle involves sending a signal through the key or a smartphone to remotely start the engine. Most models can be controlled via the car key. Precautions for Using Remote Start: The remote start control system can only be installed in automatic transmission models. This is because automatic transmissions come with a TCU (Transmission Control Unit), which informs the ECU (Engine Control Unit) about the gear position. The engine will only start if the onboard computer confirms the gear is in the P (Park) position, preventing accidental vehicle movement. Aftermarket installations lack this safety feature.

16

2

Share

Can the rear seats of the Corolla 1.6 be folded down?

Some models of the Corolla 1.6 support proportional folding of the rear seats, offering flexible space utilization. Introduction to Corolla rear seats: Only mid-to-high trim models of the Corolla support the rear seat folding function. The rear seats can be folded in a 4/6 proportional split. When folding, make sure to press down the backrest before pulling it out. Before folding the rear seats, check and confirm that the safety lock lever in the trunk is raised. While pulling the seatback lock release button, fold the seatback. Method to fold Corolla rear seats: Open the rear passenger-side door of the Toyota New Corolla, open the rear trunk lid of the Toyota New Corolla, pull the rear seat unlock switch of the Toyota New Corolla, gently push the rear seatback forward to unlock it, and then adjust the headrest inside the car to fully fold down the rear seats of the Toyota New Corolla.

11

3

Share

What are the differences between Maybach Mercedes and S-Class?

What causes the sunroof rattle in Volkswagen CC?

How to Spray Car Paint?

What is the function of the car engine fault light indicator?

How many years of history does BMW have?

Can BMW ConnectedDrive Start the Car Remotely?

Can the rear seats of the Corolla 1.6 be folded down?

Will the timing belt breakage of the Yuexiang V3 cause valve damage?

Which country is Skoda from?

Can I Change the Oil for Vios by Myself?

What is the normal idle speed for Xiali N5?