What are the differences between Lynk & Co 01, 02, 03, and 05?

1 Answers
LaSamantha
07/29/25 9:47pm
Here are the specific differences between Lynk & Co 01, 02, 03, and 05: 1. Vehicle types: Lynk & Co 01 and 02 are compact SUVs, 03 is a compact sedan, and 05 is a compact crossover SUV. 2. Powertrain: The 01, 02, 03, and 05 share the same powertrain and chassis structure. 3. Engines: The Lynk & Co 01, 02, 03, and 05 use a total of three engines: a low-power version 1.5-liter turbocharged engine, a high-power version 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine.
Was this review help?
20
3
Share
More Forum Discussions

What Causes Transmission Oil Leak in the LaCrosse?

Transmission oil leak in the LaCrosse may be caused by deteriorated sealing gasket airtightness or transmission overheating. The specific causes and solutions are as follows: Deteriorated sealing gasket airtightness: Oil seals are rubber components that can harden, age, or crack over time, leading to transmission oil leaks. The solution is to replace the sealing gasket. Transmission overheating: Transmission fluid, similar to engine oil, primarily serves lubrication, cleaning, cooling, rust prevention, and sealing functions. During operation, the transmission generates high temperatures and pressure, which can cause oil leaks. The solution involves replacing shift gears based on their wear condition.
4
0
Share

What are the reasons for the malfunction of the Mercedes-Benz C180 radar?

Mercedes-Benz C180 radar malfunction may be due to sensor failure, system display issues, etc. The specific reasons and solutions are as follows: Sensor failure: When the car is in reverse, a specific sensor consistently fails to detect obstacles, or the four green indicator lights on the dashboard display flicker randomly. This may indicate sensor failure or poor internal contact. The solution is to replace the faulty sensor. System display malfunction: When the car is in reverse, the buzzer sounds an alert, but the display shows nothing. This could be due to a loose or poorly connected controller connector or a malfunctioning display. The solution is to replace the combination instrument.
4
1
Share

Why Are the Headlights of a BMW Not Working?

There could be several reasons why the headlights of a BMW are not working, such as a burnt-out filament or a relay malfunction. Below are the specific causes and solutions: Burnt-out Filament: If the low beam headlights are not working, it might be due to a burnt-out filament. First, check if there is power at the switch, then inspect the fuse for any abnormalities to make a judgment. The solution is to replace the bulb promptly. Relay Malfunction: Open the relay cover and check if the coil and resistor are intact. If the resistor is heating up and the contacts cannot close, press the movable contact. If the turn signal lights up at this point, it indicates a relay malfunction. The solution is to replace the component.
20
0
Share

Do I Need to Register a Motorcycle After Adding Three Cases?

If the motorcycle did not come with three cases when it left the factory and during the initial registration, according to regulations, adding three cases afterward requires applying for and registering with the vehicle management office. Precautions for using fuel-injected motorcycles are as follows: Avoid long-term inactivity: Motorcycles left unused for extended periods are prone to battery depletion. Fuel-injected motorcycles cannot function properly if the battery is dead or depleted. It's best to start the motorcycle every half a month or charge the battery before starting. Do not start immediately after unlocking: Fuel-injected vehicles generally undergo a self-check process for the fuel injection system when unlocked. Wait for the self-check to complete before starting, as the fuel pump is still establishing constant oil pressure when the power is first turned on. Avoid aggressive acceleration right after starting: Aggressively accelerating a fuel-injected motorcycle immediately after starting is bad for the engine, as it hasn't reached normal operating temperature yet, which can accelerate engine wear. Registration process for adding three cases to a motorcycle: Prepare Materials Copy of ID card. Original vehicle registration certificate. Ride the motorcycle to the vehicle management office with the cases installed. Measure the dimensions of the cases (according to motorcycle cargo regulations). Then, submit the materials for application, photo inspection, and vehicle inspection (I registered three cases, crash bars, phone mounts, and auxiliary lights together). The traffic police will handle the process accordingly, with a fee of 10 yuan for the certificate.
2
2
Share

What are the consequences of forgetting to engage the parking brake?

Forgetting to engage the parking brake when parking can easily lead to vehicle rollaway accidents. The function of the parking brake is to provide braking when parking on flat ground or slopes, preventing the vehicle from moving automatically when unattended and avoiding traffic accidents. Below are some precautions for using the parking brake: When stuck in traffic on a slope, remember to engage the parking brake: During daily driving, maintain a certain distance from other vehicles. If the vehicle starts to roll backward, immediately take remedial measures such as stepping on the foot brake and engaging the parking brake. Driving with the parking brake engaged causes significant brake wear: Develop correct driving habits. Before driving, check whether the parking brake has been released. Always observe the information on the dashboard and pay attention to warning lights to avoid driving with the parking brake engaged.
9
2
Share

Are the automatic transmissions of Jetta and Bora the same?

Jetta and Bora do not have the same automatic transmissions. Both are from Aisin, but the Jetta uses a 6-speed automatic transmission, while the Bora is equipped with a 6-speed tiptronic transmission. Automatic Transmission: An automatic transmission is a gearbox that can automatically shift gears based on the vehicle's speed and engine RPM, as opposed to a manual transmission. Currently, there are four common types of automatic transmissions in automobiles: hydraulic automatic transmission (AT), continuously variable transmission (CVT), automated manual transmission (AMT), and dual-clutch transmission (DCT). Tiptronic Transmission: A tiptronic transmission is a gearbox that combines the functions of manual and automatic transmissions. This technology was developed to enhance the fuel efficiency and controllability of automatic transmissions, allowing drivers to manually decide the shift timing, which would otherwise be determined by the computer. This improves driving operability and enriches the driving experience.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.