What are the differences between k20c3 and k20c5?

1 Answers
EmiliaRose
07/25/25 3:05am
k20c3 and k20c5 have certain differences in terms of production locations. The following are the differences between k20c3 and k20c5 in production locations: 1. k20c3: Produced by dhec. 2. k20c5: Produced by Honda of America. Below is some extended information related to the Honda Accord: 1. Model: The Accord is a mid-size car under GAC Honda. 2. Body dimensions: The body dimensions are 4893mm in length, 1862mm in width, 1449mm in height, with a wheelbase of 2830mm and a curb weight of 1495kg. 3. Suspension: The 2021 Accord features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5t turbocharged engine, delivering a maximum horsepower of 194ps, a maximum power of 143kw, and a maximum torque of 260nm, paired with a CVT transmission.
Was this review help?
11
2
Share
More Forum Discussions

How to operate the air conditioning in Hongqi H5?

Hongqi H5 is equipped with an automatic air conditioning system. Simply turn on the AC switch and set the desired temperature, and it will automatically adjust cooling or heating. Of course, you can also use the manual mode for operation. More details about Hongqi H5 are as follows: 1. Exterior. The exterior design of Hongqi H5 adopts a style similar to the new H7, with the family-style fan-shaped grille connected to the full LED headlights, giving the car a fashionable look. 2. Interior. The interior of Hongqi H5 mainly focuses on simplicity and practicality, without emphasizing too much luxury. The door panels and dashboard use a large amount of soft materials and hand-stitched seams. The wraparound wood trim on the top of the dashboard and the 10-inch floating display add a touch of technological luxury. 3. Features. In addition to common configurations such as electric memory seats, multifunction steering wheel, large LCD screen, one-key start, electronic parking brake, automatic braking, automatic parking, and electric trunk lid, it also comes with voice control and APP remote control systems.
4
5
Share

Is Wheel Balancing Necessary After Changing Tires?

Wheel balancing is necessary after changing tires, and here are the reasons: 1. Generally, it is necessary to perform wheel balancing after replacing or repairing the tire system, as prolonged use may lead to the detachment of balancing weights, resulting in an imbalance in the tire's weight distribution. 2. Any operation that alters the mass distribution of any part of the wheel requires wheel balancing. 3. A car's wheel consists of two parts: the tire and the rim. However, due to various reasons, the mass distribution of this assembly cannot be perfectly uniform. If new tires are installed without performing wheel balancing, the tires may become unbalanced during high-speed driving, posing a risk to driving safety.
6
1
Share

How Far Can You Drive After the Fuel Gauge Warning Light Comes On?

After the fuel gauge warning light comes on, a car can generally travel at least 50 kilometers. For specific distances, refer to the vehicle's user manual for detailed data, as it varies by model. Below are the hazards of low fuel levels: 1. With low fuel, aggressive driving can cause significant vehicle tilting, affecting the fuel pump's operation. 2. Especially when driving uphill in mountainous areas, if the fuel level is less than 1/4, the vehicle may experience insufficient fuel supply, leading to dangerous situations such as stalling, loss of power, or rolling backward.
10
3
Share

Does the Dry Dual Clutch Transmission Fluid Need to Be Replaced?

There is no transmission fluid inside the dry dual clutch, but the rear section of the dry dual clutch uses traditional gear oil for lubrication. For this part of the gear oil, regular replacement is still necessary. Here is some information about the dry dual clutch: 1. For the dry dual clutch, it mainly consists of two parts. To reduce fuel consumption, the front part of the dual clutch module is cooled by forced air convection, and there is no transmission fluid involved in lubrication in this section. 2. For the rear part of the gears, traditional gear oil is still required for lubrication, similar to a manual transmission. Generally, after 60,000 to 70,000 kilometers, this part of the gear oil needs to be replaced.
19
3
Share

What Causes Unstable Idling and Car Shaking?

There are several main reasons for unstable idling and shaking in cars: 1. Improper air-fuel mixture: The incorrect ratio of air to fuel in the engine compartment leads to ECU miscalculations, causing errors in the control of the air-fuel mixture and ignition timing through actuators. This reduces the vehicle's power output, resulting in shaking. 2. Low ignition energy: The primary issue during cold starts is low temperature. Insufficient engine, fuel, and lubricant temperatures require more fuel injection during cold starts to meet power demands. 3. Carbon deposits on valves and intake passages: Carbon buildup on engine valves and intake passages also fails to meet the vehicle's power requirements, leading to unstable idling and shaking.
5
1
Share

Where is the cabin air filter located in the Changan V3?

The cabin air filter of the Changan V3 is located at the front-left position of the engine compartment. Upon opening the engine compartment, you will see a black cover housing the cabin air filter. Here's some relevant information: The cabin air filter ensures tight sealing against the housing to prevent unfiltered air from entering the vehicle cabin, effectively separating solid impurities such as dust, pollen, and abrasive particles from the air. The Changan V3 is a classic sedan introduced by Changan Automobile, serving as an entry-level three-box family car. In terms of body dimensions, the V3 measures 4200mm in length, 1650mm in width, and 1465mm in height, with a wheelbase of 2410mm.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.