···
Log in / Register

What are the differences between Jetta VS5 and Jetta VS7?

5 Answers
DeNorah
07/29/25 12:07pm

The differences between Jetta VS5 and Jetta VS7: 1. Different dimensions: The Jetta VS5 is 4419mm long, 1841mm wide, and 1616mm high, with a wheelbase of 2630mm; the VS7 is 4624mm long, 1841mm wide, and 1633mm high, with a wheelbase of 2730mm. 2. Different engines: The VS5 is equipped with 1.4T and 1.5L engines; the VS7 is equipped with 1.4T and 2.0T engines. From the data, the VS7 has certain advantages in length, wheelbase, and height. The 100mm difference in wheelbase gives the Jetta VS7 a significant advantage in rear legroom, which can be simply understood as the Jetta VS7 being an extended version of the Jetta VS5.

Was this review help?
4
1
Share
AdalineLynn
08/13/25 10:10pm

As a family driver who frequently takes long trips, I recently compared these two models. The VS5 is about 4.4 meters long, a compact SUV size that makes city parking super convenient; the VS7 is over 4.6 meters with a longer wheelbase, offering noticeably more rear seat space—perfect for stuffing two extra bags during family trips. Both use a 1.4T engine, but the VS7's rear suspension is tuned softer, providing better stability on highways and improved noise insulation. Price-wise, the VS5 starts at just over 80,000 yuan, offering great value; the VS7 costs about 20,000 yuan more but adds features like a panoramic sunroof and a larger screen. If your budget allows, the VS7 is the more worthwhile choice for its practical space. Don’t forget to check fuel consumption—both average around 7L/100km in the city and are more efficient on highways.

Was this review help?
12
0
Share
Expand All
DelLyla
10/08/25 8:37am

As a working professional who frequently researches cars, the core differences between the VS5 and VS7 lie in their size and practical usage scenarios. The VS5 measures under 4.5 meters in length, offering compact agility that makes urban traffic navigation effortless. The VS7 extends its wheelbase beyond 270mm, providing more generous legroom and trunk space. Both models are equipped with a 1.4T engine paired with a 6AT transmission, ensuring smooth performance with fuel efficiency. However, the VS7's starting price is ¥15,000 higher, adding features like lumbar support adjustment and a rear center armrest. For daily tasks like school runs or grocery shopping, the VS5 suffices; if frequently transporting elderly passengers, the VS7's independent rear suspension significantly reduces bumps for superior comfort. Always test drive before purchasing—don't rely solely on sales pitches. Additionally, the slight weight difference of tens of kilograms leads to minor variations in insurance and maintenance costs.

Was this review help?
1
3
Share
Expand All
DelCayden
11/22/25 3:08am

From an automotive enthusiast's perspective, the VS5 and VS7 share the same platform but differ in size classification. The VS5 is a compact SUV with a length under 4.4 meters and a shorter wheelbase, while the VS7 is upgraded to a midsize SUV, exceeding 4.6 meters in length. Both models are powered by the EA211 1.4T engine with identical horsepower. The main difference lies in the chassis: the VS5 features a torsion beam non-independent rear suspension, suitable for short trips, whereas the VS7 uses a multi-link independent suspension for better shock absorption on rough roads. In terms of space, the VS7 offers nearly an extra fist's width of rear legroom. Functionally, the VS7 may come with an upgraded reversing camera and is priced about 10,000 yuan higher. Maintenance costs are similar, though the VS7's larger tires may wear out faster. Choosing between them depends on needs: the VS5 is economical for young buyers, while the VS7 offers better value for those prioritizing space.

Was this review help?
11
1
Share
Expand All
LaAlina
01/12/26 4:44am

I've been driving the VS3 for over 3 years. The VS5 and VS7 differ in positioning and cost. The VS5 starts at just over 80,000 yuan, with a smaller size and slightly cramped rear seats. The VS7 starts at nearly 100,000 yuan, with a wheelbase exceeding 2.7 meters and a significantly wider trunk. Both models feature a 1.4T turbo engine paired with an automatic transmission, with similar fuel consumption of around 7L per 100km in city driving. However, the VS7 offers more advanced features like wireless charging and rear air conditioning, along with better noise control. If you're on a tight budget, the VS5 is sufficient for daily commuting. If you need more storage space or for family use, the VS7 is worth the extra cost. Maintenance costs are similar, but the VS7's larger size requires wider parking spaces. Test driving both will help you decide which suits you better. Remember to check reviews for quality; the Jetta series is known for good durability.

Was this review help?
19
2
Share
Expand All
More Forum Discussions

What Causes Frost or Water Droplets on the Low-Pressure Pipe of a Car's Air Conditioning System?

Introduction to the causes of frost or water droplets on the low-pressure pipe of a car's air conditioning system: 1. Normal Frosting: When the air conditioner starts running, both the condensation temperature and pressure are relatively low, causing the capillary tube's refrigerant supply to be below the normal level, which in turn lowers the evaporation pressure. This leads to frost formation on the low-pressure supply pipe. However, this frosting and melting process is temporary, usually beginning shortly after the compressor starts. The entire process typically concludes within 5 minutes, after which the air conditioner operates normally. 2. Clogged Refrigeration System Preventing Normal Refrigerant Circulation: If there is a restriction in the connecting pipes, inspect the pipeline for blockages or bends. If found, this indicates a flow restriction, and replacing the pipe may be necessary. Regular car maintenance is beneficial for the proper functioning of the air conditioning system. 3. Clogged Air Conditioning Filter: Blockages often occur at the filter outlet or capillary tube inlet. A partial blockage creates a throttling effect, reducing the pressure below the normal operating level and causing frost on the supply pipe. 4. Refrigerant Leakage Leading to Insufficient Refrigerant: A lack of refrigerant can cause frost on the low-pressure supply pipe, which is a typical malfunction. This is evident when frost appears as soon as the air conditioner starts and persists even after the compressor has run for over 10 minutes. For older air conditioners, this may be normal and can be resolved by adding refrigerant. However, if this occurs in units that are only a few years old or newly installed, it likely indicates a refrigerant system leak. 5. Clogged Refrigeration System Preventing Normal Refrigerant Circulation: If there is a restriction in the connecting pipes, inspect the pipeline for blockages or bends. If found, this indicates a flow restriction, and replacing the pipe may be necessary. Regular car maintenance is beneficial for the proper functioning of the air conditioning system. 6. Clogged Air Conditioning Filter: Blockages often occur at the filter outlet or capillary tube inlet. A partial blockage creates a throttling effect, reducing the pressure below the normal operating level and causing frost on the supply pipe. 7. Refrigerant Leakage Leading to Insufficient Refrigerant: A lack of refrigerant can cause frost on the low-pressure supply pipe, which is a typical malfunction. This is evident when frost appears as soon as the air conditioner starts and persists even after the compressor has run for over 10 minutes. For older air conditioners, this may be normal and can be resolved by adding refrigerant. However, if this occurs in units that are only a few years old or newly installed, it likely indicates a refrigerant system leak.
7
2
Share

Reasons for the Engine Warning Light in Qoros 5

The engine warning light in Qoros 5 may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel/oil quality issues: Failure to use the fuel and engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor combustion of air-fuel mixture: Poor combustion can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a caution. Issues like spark plug failure, ignition coil malfunction, fuel pump failure, or fuel line blockage can all cause poor combustion. Turbocharging problems: Intake turbocharging pipelines or turbocharger issues can also trigger the engine warning light. The most common issue is turbocharger damage, often accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: If the vehicle's intake system malfunctions, it may lead to engine pipeline blockages, and in severe cases, trigger the engine warning light. A dirty air filter that hasn't been cleaned regularly can cause intake issues. Exhaust problems: Exhaust system faults can also activate the engine warning light. Common causes include rear oxygen sensor failure, three-way catalytic converter issues, exhaust camshaft and bearing failures. The three-way catalytic converter is most frequently affected. Using leaded gasoline, lead/silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can all contribute to catalytic converter failure. Anti-theft system malfunction: If the electronic anti-theft system fails or there's a mismatch between the anti-theft controller and engine ECU, the anti-theft system may prevent normal engine operation while illuminating the warning light. When the engine warning light illuminates, follow these steps: First, check if the engine is running normally. Look for symptoms like shaking or black smoke emission. If present, avoid restarting the engine. Note: Never restart if the red warning light is on. If the engine can be started, turn it off and wait 5-10 minutes. Without pressing the brake pedal, press the start button once or turn the key halfway to the ON position (without depressing the clutch). The vehicle will initiate self-diagnosis upon power-on. After 5-10 seconds, observe whether the warning light turns off. If the light remains on, visit a service center promptly. Technicians can use portable diagnostic tools to read fault codes, identify issues, and perform targeted repairs.
4
2
Share

Toyota Sienna Engine Model?

Toyota Sienna's engine is produced by GAC Toyota Engine Factory and is a domestically manufactured engine. The engine model for the Toyota Sienna 3.5L version is 2GRFSE, with a maximum torque of 332Nm and a maximum horsepower of 269. The 2.7L version's engine model is 2GRFKS, with a maximum torque of 253Nm and a maximum horsepower of 190. The 3.3L version's engine model is 3MZFE, with a maximum power of 405KW, a maximum torque of 242Nm, and a maximum horsepower of 230. For daily maintenance of the Toyota Sienna's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to the mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid failures, change the oil regularly according to usage conditions and keep the oil level moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and bring contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine's normal operation but also extends the overall lifespan of the radiator and engine.
2
2
Share

How to Open the Door with a GLC Mechanical Key?

The owner presses the button on the side of the car remote key to remove the mechanical key. Under the door handle on the driver's side, there is a small hole where the key can be inserted. Lift the car key upward to remove the cover on the door handle, revealing the hidden mechanical keyhole. Insert the mechanical key into the keyhole and turn it counterclockwise to unlock and open the door.
8
1
Share

How to Deal with Malibu XL Display Black Screen on Highway?

Promptly check whether there is a loose connection in the wiring. If present, it can naturally cause the central control screen to black out. In this case, simply reconnect the loose part. It could also be due to aging of the power signal cable. Try replacing it with a new one to see if the black screen issue is resolved. A faulty power supply module not only causes lag but may also lead to a black screen in severe cases. Another possible reason could be defects in the circuit design.
19
5
Share

How to Use a Car Window Breaker?

First, take out the safety hammer from the car, then directly strike the four corners of the tempered glass. Avoid hitting the center initially. When slight cracking appears, it indicates that the stress distribution inside the glass has been significantly disrupted, causing numerous cracks to form instantly. If the glass has a film, you need to exert force to kick it open, as the film has anti-shatter properties and won't detach without sufficient external force. Once the glass has loosened sufficiently, passengers can promptly and orderly exit through the window and move to a relatively safe location.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.