What are the differences between GZ150A and GZ150E?

1 Answers
HarperLee
07/29/25 11:23pm
The differences between GZ150A and GZ150E are as follows: 1. Different emission standards, GZ150A meets the China III emission standard, while GZ150E meets the China IV emission standard. 2. Different prices, the official guide price of GZ150E is higher than that of GZ150A. 3. Different engines, GZ150E has switched from a Suzuki engine to a fully localized imitation Suzuki engine. 4. Different appearances, all brand logos on the body, engine, fuel tank, and side cases of GZ150E have been changed from Suzuki's independent logo to Haojue's logo.
Was this review help?
19
5
Share
More Forum Discussions

What are the serious defects of the BYD S6?

BYD S6 has the following serious defects: Noticeable noise: When the vehicle is idling, especially when cold, the noise inside the cabin is noticeable. To ensure the lubricant is fully and evenly distributed to protect the engine during operation (idling stabilizes at 800 RPM, with an instantaneous fuel consumption of around 1.4), the vehicle needs to warm up for more than three minutes, which is somewhat lengthy. Excessively hard brake discs: The overly hard brake discs cause abnormal braking noise. Abnormal noise from certain components at high RPM: Some connected parts are not secure enough. Failure to detect the key: While driving, issues such as the horn not working and turn signals not lighting up may suddenly occur. Limited driver's seat space: The foot space is small, and releasing the clutch quickly can easily cause the left knee to hit.
11
5
Share

What to Do When a Diesel Vehicle Emits Black Smoke?

Solutions for diesel vehicles emitting black smoke include replacing the air filter, replacing the solenoid valve, replacing the fuel filter, cleaning the fuel system, and replacing damaged components. Specific details are as follows: Replace the air filter: When excessive dust and particles in the air cause the filter element to accumulate too much dirt and debris, it can lead to insufficient air supply, resulting in black smoke emission. In this case, the air filter needs to be replaced. Replace the solenoid valve (including the turbocharger's solenoid valve): Poor diesel quality can cause clogging or wear of the fuel injector, leading to inaccurate fuel supply. In such cases, the solenoid valve needs to be replaced. Replace the fuel filter: If the fuel filter does not meet standards, is used beyond its recommended lifespan, or is damaged due to quality issues, particles and moisture can enter the engine along with the diesel, damaging the fuel system—especially the common rail system. This prevents the establishment of high pressure and results in insufficient fuel atomization, causing black smoke emission. In such cases, the fuel filter needs to be replaced. Clean the fuel system: Carbon deposits can obstruct the fuel system, leading to poor fuel supply and subsequent black smoke emission. Replace damaged components: Prolonged driving can cause component wear, affecting fuel and air supply. In such cases, the damaged components need to be replaced.
12
5
Share

Does the Audi S4 have engine sound?

The Audi S4 does have engine sound, and it is quite captivating. The Audi S4 is the direct successor to the S2 model, a four-wheel-drive coupe-style sports car with exceptional power and explosive performance. Currently, the Audi S4 sold in China is imported, available in two versions: the 2018 and 2019 models.  The Audi S4 does have engine sound, and it is quite captivating.   The Audi S4 is the direct successor to the S2 model, a four-wheel-drive coupe-style sports car with exceptional power and explosive performance.   Currently, the Audi S4 sold in China is imported, available in two versions: the 2018 and 2019 models. Below is a detailed description of the 2019 Audi S4.   The 2019 Audi S4 was launched in July 2019, with prices ranging from 449,800 to 450,800 RMB, complying with the China National V emission standard.   1. Exterior:   The 2019 Audi S4 measures 4749mm in length, 1842mm in width, and 1400mm in height, with a wheelbase of 2831mm.   The front face features Audi's family-style design, with a hexagonal front grille, eagle-eye-style headlights, and extensive chrome trim in the grille area. The overall lines are bold and aggressive, with high recognizability.   2. Features:   Standard features include body stability control, anti-lock braking, side airbags, tire pressure monitoring, cruise control, lane keeping, blind-spot monitoring, hill start assist, auto hold, and rearview camera.   3. Performance:   The 2019 Audi S4 is equipped with a 3.0T engine, delivering a maximum output of 260 kW and a peak torque of 500 N·m. It is paired with an 8-speed automatic transmission, achieving a 0-100 km/h acceleration time of 4.8 seconds.
11
5
Share

Will the car battery die if not used for a month?

Leaving a car unused for a month will not cause the battery to die, but it is best to disconnect the positive and negative terminals to avoid natural power drain. Poor vehicle condition: For cars in poor condition, the battery may lose power in about a week. However, there is no need to worry too much. Simply driving normally for one to two hours can restore the battery to its normal charge level. If the situation is severe enough that the engine cannot be started, a jump start may be required to activate it. For vehicles parked for extended periods, it is advisable to start and drive them at least once a week if possible. Recommendations: If you are usually busy with work, consider driving the vehicle on weekends for a few dozen kilometers. This can help recharge the battery, evenly distribute tire pressure, and most importantly, allow the engine oil to better adhere to the internal parts of the engine, which is crucial for vehicle maintenance. Keeping the engine running smoothly is also an effective method of self-maintenance for the vehicle.
11
1
Share

How to Repair a Compressor?

For issues with the compressor motor part, poor sealing of the compressor suction and exhaust valves, or thermal protector failure, replacement is the recommended solution. For compressor seizure or cylinder jamming faults, repair can be attempted first. The specific methods are as follows: Knocking Method: After turning on the compressor, use a wooden hammer to tap the lower half of the compressor to vibrate the stuck internal components and get them moving. Capacitor Start Method: Connect a capacitor with a larger capacitance than the original one to the circuit for starting. High Voltage Start Method: Use a voltage regulator to increase the power supply voltage before starting. Pressure Relief Method: Release all the refrigerant from the system before starting.
11
1
Share

Where is the Mercedes-Benz wiper switch located?

The wiper switch of Mercedes-Benz cars is located on the left side of the steering wheel, combined with the light control on a single lever. Mercedes-Benz wipers' automatic intermittent working gear can adjust the swing frequency, making the wiper's swing frequency change according to the vehicle speed. When the wiper lever is set to the automatic intermittent swing gear, the wiper will change its swing frequency based on the adjusted frequency and vehicle speed. Wipers are also known as windshield wipers, water wipers, or windscreen wipers. They are devices used to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. Precautions for using wipers: Pay attention to whether the swing amplitude of the upper and lower wipers is consistent. If not synchronized, correct it in time; If the wiper makes a heavy "quacking" sound during operation, there may be an issue with the wiper's adjustment, with excessive downward pressure; After the wiper wipes several times, if some moisture remains on the windshield, it indicates that the rubber strip is aged and needs replacement; Never operate the wiper dry, as it not only damages the wiper itself but can also cause significant harm to the glass if there are foreign objects like sand; Regularly lubricate the wiper. Frequently add lubricant at the wiper arm joints to reduce mechanical friction; Remove debris promptly. After parking for a long time, there may be many dead branches and leaves on the car glass. Do not use the wiper to scrape debris directly. Be careful not to forcibly peel or pour hot water, as this can cause problems such as wiper blade tearing or windshield cracking. It is recommended to start the vehicle, turn on the heater, and blow warm air toward the front windshield to melt the frozen wiper with the air conditioning's hot air. Additionally, when choosing windshield washer fluid in winter, pay special attention to selecting antifreeze washer fluid. Judge based on the local winter temperature. If you are in a northern region, you can choose a special antifreeze type washer fluid to ensure it does not freeze even at -40 degrees Celsius.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.