What are the differences between Great Wall Haval H2 and H2S?

What Are the Precautions and Procedures for Buying a Used Car?

When buying a used car, there are several precautions to consider, such as checking the new car market price, estimating the depreciation rate, adjusting the actual depreciation rate, and correcting the price deviation value. Below are the detailed explanations: Check the new car market price: Before purchasing a used car, first identify the brand and model of the used car, then check the latest market price of the new car version. Estimate the depreciation rate: The age of the car is calculated based on the date of its first registration. According to empirical calculations, the depreciation rates for the first five years are 15%, 12%, 10%, 8%, and 7%, respectively. After five years, the annual depreciation rate can be calculated at 5%. Additionally, the manufacturing date of the car may not necessarily be the same as the registration date. Adjust the actual depreciation rate: Factors such as the vehicle's appearance, mileage, and market availability can affect the depreciation rate. Each factor may cause the depreciation rate to increase or decrease by about 1%. Correct the price deviation value: Multiply the new car market price by the depreciation rate to estimate the approximate residual value of the used car. The procedures for buying a used car involve four scenarios: individual-to-individual, individual-to-organization, organization-to-organization, and organization-to-individual. Below are the detailed explanations: Individual-to-individual: Original ID cards of both the buyer and seller; vehicle license, motor vehicle registration certificate. Individual-to-organization: Buyer's organization code certificate (original/within the annual inspection validity period), official seal, and seller's original ID card; vehicle license, motor vehicle registration certificate. Organization-to-organization: Organization code certificates of both buyer and seller (original/within the annual inspection validity period), official seals, and ID card of the seller's authorized representative; vehicle license, motor vehicle registration certificate. Organization-to-individual: Buyer's original ID card, seller's organization code certificate (original/within the annual inspection validity period), official seal, and ID card of the seller's authorized representative; vehicle license, motor vehicle registration certificate.

12

4

Share

What does Alphard mean?

Alphard is a luxury MPV developed by Toyota in response to Nissan's Elgrand, based on an improved chassis of the Previa. The first-generation Alphard was introduced in 2002, equipped with either a 2.4-liter or 3.0-liter engine, both available with an optional four-wheel-drive system. Here are the details: 1. Interior: The Alphard features seven seats. The driver's seat comes with 8-way power adjustment and a memory function for three settings. The most comfortable second-row seats are equipped with 4-way power-adjustable Ottoman first-class seats, featuring three-way adjustable headrests, independent armrests, cup holders in the armrests, a multifunctional folding table, and a maximum reclining angle of 78 degrees. The seats also have a sliding range of 450mm and are complemented by height-adjustable footrests. 2. Exterior: The side profile is more rounded, showcasing a sleek and streamlined design. It features triangular front windows and parallelogram-shaped rear windows, creating a unique geometric combination on the side of the vehicle.

2

5

Share

What is the measured ground clearance of the Honda Breeze?

The minimum ground clearance of the Honda Breeze is 208 millimeters. The minimum ground clearance of the Honda Breeze refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. Generally, a higher ground clearance improves the vehicle's off-road capability, but if the Honda Breeze's ground clearance is too high, the stability at high speeds may decrease. The Honda Breeze is a compact SUV under GAC Honda. The dimensions of the four-wheel-drive version are 4634 mm in length, 1855 mm in width, 1689 mm in height, with a wheelbase of 2660 mm. The two-wheel-drive version measures 4634 mm in length, 1855 mm in width, 1679 mm in height, with a wheelbase of 2661 mm. Typically, the ground clearance for sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the Honda Breeze's ground clearance is not static—it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the vehicle's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and road conditions. For urban driving with well-paved roads, a lower ground clearance can enhance stability and comfort. For frequent travel to remote areas or driving on rough terrains, a higher ground clearance is advisable to improve off-road performance and avoid undercarriage scrapes or damage.

18

0

Share

Where is the fuel pump relay located in the 2011 Nissan Qashqai?

The fuel pump relay of the Nissan Qashqai is located in the engine compartment, beneath the intake pipe, next to the battery. A relay is an electronic control device that consists of a control system and a controlled system, commonly used in automatic control circuits. It essentially functions as an automatic switch that uses a smaller current to control a larger current, thereby playing roles such as automatic regulation, safety protection, and circuit switching in electrical circuits. Below are related details: 1. Principle: Electromagnetic relays generally consist of an iron core, coil, armature, and contact reeds. When a certain voltage is applied across the coil, a current flows through it, generating an electromagnetic effect. The armature is then attracted by the electromagnetic force, overcoming the tension of the return spring to move toward the iron core, thereby causing the moving contact of the armature to connect with the stationary contact (normally open contact). When the coil is de-energized, the electromagnetic attraction disappears, and the armature returns to its original position under the spring's reaction force, causing the moving contact to reconnect with the original stationary contact (normally closed contact). This process of connection and disconnection achieves circuit conduction and interruption. 2. Distinguishing 'Normally Open' and 'Normally Closed' Contacts: The stationary contact that remains disconnected when the relay coil is not energized is called the 'normally open contact'; the stationary contact that remains connected is called the 'normally closed contact'.

1

Share

What does the Elysian EV mode mean?

Elysian EV refers to the electric mode. When this mode is activated, the vehicle is driven by the generator, which is suitable for use in traffic congestion. Below are the specific details about the Elysian: 1. Powertrain: The Elysian is an MPV under Dongfeng Honda, equipped with a 2.0L L4 naturally aspirated engine, delivering a maximum horsepower of 146 HP and a maximum torque of 175 Nm, paired with a CVT transmission. 2. Body dimensions: The Elysian measures 4950mm in length, 1842mm in width, and 1711mm in height, with a wheelbase of 2900mm. It has a top speed of 160 km/h and a fuel tank capacity of 50L.

13

4

Share

Analysis of the Audi Q5 Chassis?

Audi Q5 chassis introduction is as follows: 1. Overview: It adopts a suspension combination of front five-link and rear trapezoidal link. The front suspension is a traditional double-wishbone suspension, with the upper and lower control arms simplified into two pull rods, allowing for more flexible suspension arrangement. The rear suspension consists of an H-shaped control arm, an upper control arm, and another upper control arm. 2. Subframe: The subframe features a frame shape reinforced with two diagonally arranged steel plates, enhancing the overall structure. The subframe is made of steel. 3. Front Suspension: The Audi Q5's front suspension is a five-link type, with the lower control arm and lower rear control arm made of aluminum. The steering tie rod and lower rear control arm have significant bends to prevent interference with the wheels when steering is at full lock, increasing the turning angle. The pivot axis of the lower rear control arm is diagonally arranged to withstand some longitudinal forces from the body. 4. Rear Subframe: The Q5's rear subframe is also frame-shaped, compared to the front subframe, it lacks the cross-reinforcing steel plates but appears larger and more robust. The rear subframe is also made of steel. 5. Rear Suspension: The Audi Q5's rear suspension is in a trapezoidal multi-link form. The H-shaped control arm, seemingly large and bulky, is actually a hollow structure, made of the same aluminum material as the wheel bearing housing. The connection point between the rear suspension spring and the hydraulic shock absorber differs, with an increased spring diameter sufficient to support the Q5's body. The hydraulic shock absorber connects through the H-shaped control arm to the wheel bearing housing.

17

5

Share

What are the differences between Great Wall Haval H2 and H2S?

What Are the Precautions and Procedures for Buying a Used Car?

What does Alphard mean?

What is the measured ground clearance of the Honda Breeze?

Where is the fuel pump relay located in the 2011 Nissan Qashqai?

What does the Elysian EV mode mean?

Analysis of the Audi Q5 Chassis?

What does traction mean in BMW?

What is the reason why the Audi Q5 cannot start after being unused for a few days?

Why is the Audi Q5's rearview mirror heating not working?

What are the reasons for the abnormal noise from the Audi Q5 steering wheel?