What are the differences between GAC Trumpchi GS3 and GS4?

1 Answers
OEmilia
07/29/25 9:40pm
The differences between GAC Trumpchi GS3 and GS4 lie in their positioning, transmission, and body dimensions. Here are the relevant details: Different Positioning: The GS3 is a small SUV; the GS4 is a compact SUV model. Different Engines and Transmissions: The GS3 does not have a dual-clutch transmission, while the GS4 does; the GS3 and GS4 share the same 1.3T engine, but the GS4 has an additional 1.5T engine. Different Body Dimensions: The GS3 measures 4350mm in length, 1825mm in width, 1655mm in height, with a wheelbase of 2560mm; the GS4 measures 4525mm in length, 1852mm in width, 1685mm in height, with a wheelbase of 2640mm.
Was this review help?
11
5
Share
More Forum Discussions

What is the issue with post-processing wiring harness abnormalities?

Post-processing wiring harness abnormalities are caused by poor contact or issues with the wiring, such as open circuits or grounding. Below is a detailed introduction to wiring harness abnormalities: Causes: Natural damage to the wiring harness during use may occur due to prolonged product usage, leading to aging of the entire wiring and cracking of the insulation layer, which reduces the mechanical strength performance. Impact: A decrease in the mechanical strength of the wiring harness can easily cause open circuits and short circuits between wires, directly resulting in the burning of the wiring harness, oxidation deformation, poor contact, and ultimately causing the equipment to malfunction.
14
1
Share

Where is the fender of a car located?

The fender is located above the front wheels on both sides of the car, specifically the protruding wheel arch section. Functions of the fender: 1. According to fluid dynamics, it reduces the drag coefficient, making the car drive more smoothly. 2. During driving, it prevents sand, gravel, and mud kicked up by the wheels from splashing onto the underbody of the car. Here are some details about the fender: 1. The fender is the outer body panel that covers the wheel, named for its resemblance to a bird's wing in older car designs. It is divided into front and rear fenders based on installation position. The front fender is installed at the front wheel and must ensure the maximum space for wheel rotation and movement. 2. Designers use a 'wheel travel diagram' based on the selected tire size to verify if the fender's design dimensions are appropriate. 3. The rear fender doesn't face issues with wheel rotation interference, but for aerodynamic purposes, it is slightly arched and protrudes outward. 4. Nowadays, some cars have fenders integrated into the main body, manufactured in one go. However, some cars, especially those with front fenders, have them as separate components for easier replacement, given the higher likelihood of front fender collisions.
5
2
Share

Does the car accelerate faster after changing the transmission fluid?

Changing the transmission fluid will not result in a noticeable improvement in acceleration. Effects of not changing transmission fluid: It causes the transmission fluid to become thicker, reducing oil pressure and hindering internal heat dissipation, leading to excessively high oil temperatures. This shortens the lifespan of both the transmission and drivetrain components. Failure to change the transmission fluid may result in sluggish starts and frequent slipping during driving. Prolonged neglect of transmission fluid changes can cause the fluid to deteriorate and evaporate under high-speed and high-temperature conditions, accelerating component wear and damaging internal transmission parts. Factors affecting vehicle acceleration: The speed of vehicle acceleration is related to the performance of the ignition system, proper tire pressure, and engine torque.
18
3
Share

Can Carbon Fiber Be Repaired?

Carbon fiber can be repaired, typically through painting treatment. Here are specific details about carbon fiber: 1. Introduction: Carbon fiber (CF or graphite fiber) is a fiber with a diameter of approximately 5-10 micrometers, primarily composed of carbon atoms. Carbon fiber boasts several advantages, including high stiffness, high tensile strength, low weight, high chemical resistance, high-temperature tolerance, and low thermal expansion. 2. Advantages: Carbon fiber utilizes carbon fiber-reinforced polymer composites. Resin-based composites reinforced with carbon fiber exhibit excellent corrosion resistance, fatigue resistance, lightweight yet high-strength characteristics, with superior strength and stiffness compared to aluminum alloys. Aluminum alloys are more prone to corrosion than carbon fiber composites.
1
4
Share

Is the Audi Q5L Considered a Luxury Vehicle?

Audi Q5L is classified as a luxury vehicle. Below is an introduction to the Audi Q5L: 1. Positioning: The Audi Q5L is positioned as a luxury midsize SUV, with a 2.9-meter wheelbase suitable for both family and commercial use. The panoramic sunroof also provides an excellent sense of openness for rear passengers. 2. Interior: The interior of the Audi Q5L has seen several updates. Upon entering the cabin, the most striking feature is the replacement of the embedded central control screen from the older model with a floating design. The steering wheel has been changed to a four-spoke style, offering a more superior feel. The full LCD instrument panel boasts a cool interface, high resolution, and clear display of various parameters, making everything easily visible. 3. Gear Shift Mechanism: The gear shift has been upgraded to a push-pull electronic gear lever, adding a more upscale touch. The operating system has been enhanced with the new MMI featuring a gesture touch panel, making it more convenient for the driver to use. 4. Engine: The Audi Q5L also features new changes in its engine. Although it still uses a 2.0T engine, it is now divided into two versions: high and low power. The high-power version delivers 185 kW, while the low-power version offers 140 kW, providing a balanced combination of performance options.
18
3
Share

Where is the Hefei Subject 2 Test Site Located?

Hefei Subject 2 test site is located at the Vehicle Management Office test site of the Traffic Police Brigade. Below are the specific details about Subject 2: Schedule: Generally, the Subject 2 test site is divided into morning and afternoon sessions. The morning session runs from 8:00 AM to 12:00 PM, and the afternoon session runs from 1:00 PM to 6:00 PM. There may be slight variations in session times between different regions, so please refer to local policies for exact timings. Test Content: The test includes reverse parking, parallel parking, curve driving, right-angle turns, hill start, and stopping at a designated point on a slope. Some regions also include a sixth item—highway toll card collection.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.