What are the differences between Emgrand S and Emgrand GS?

1 Answers
VanGavin
07/28/25 4:15pm
Emgrand S and Emgrand GS have the following differences: 1. Different product prices: Emgrand S is relatively higher priced; Emgrand GS is relatively lower priced. 2. Different interior designs: Emgrand S is more minimalist: The floating central control screen and a strip of physical buttons below are the entirety of its dashboard, with few buttons around the gear lever. Emgrand GS has a more complex interior, featuring an embedded central control screen with an air conditioning control panel below and many functional buttons around the gear lever. 3. Different power outputs: Emgrand S has relatively weaker power, equipped with a 1.4T turbocharged engine with a maximum power of 104kw and a maximum torque of 235n.m. Emgrand GS has relatively stronger power, equipped with a 1.5T turbocharged engine with a maximum power of 130kw and a maximum torque of 155n.m.
Was this review help?
3
1
Share
More Forum Discussions

What is the normal reading of a paint thickness gauge for factory paint?

The standard thickness of factory-applied automotive paint typically ranges between 80-150 micrometers (um). If the paint thickness falls within this range, it generally indicates original factory paint. Repainted areas usually measure around 250um. How to use a paint thickness gauge: 1. First, calibrate the gauge before use to prevent measurement errors. 2. With the device powered off, press and hold the power button to enter setup mode. 3. Select the NFE/FE auto-identification mode. 4. After configuration, gently press the probe against the painted surface to measure - the display will show the current paint thickness. Important notes about paint thickness measurements: Higher readings from the paint gauge may indicate the vehicle has experienced multiple collisions or severe impacts.
7
2
Share

Where is the emergency gear unlock for the Passat Lingyu located?

The P-gear unlock switch for the Passat Lingyu is located at the head of the vehicle's gear lever. It is a large button; pressing it will unlock the P-gear of the automatic transmission vehicle, allowing the gear lever to be moved out of the P-gear position. Relevant information about the auto-locking function is as follows: 1. Introduction: The auto-locking function of motor vehicles automatically locks the vehicle doors when the vehicle reaches a certain speed. 2. Purpose: It prevents children from opening the rear doors of the vehicle without permission during travel, avoiding unnecessary traffic accidents. It also prevents potential robbery attempts by someone opening the car door while the vehicle is stopped at a traffic light.
20
5
Share

What Causes Engine Shaking During Cold Morning Starts?

Engine shaking can be caused by excessive carbon deposits, fuel system malfunctions, or cylinder misfires. Here are detailed explanations: Excessive Carbon Deposits: Severe carbon buildup in engine cylinders can lead to spark plug clogging and valve blockage, directly resulting in vehicle shaking during idle. Fuel System Malfunction: Unstable fuel pressure may cause inconsistent air-fuel mixture concentration, resulting in both shaking and unstable idle. First consider replacing the fuel filter, as prolonged use may cause clogging. Then check fuel pressure bypassing the filter - abnormal readings may indicate fuel pump issues. Cylinder Misfires: If ignition coils malfunction or spark plugs fail to fire properly for any reason, the vehicle will exhibit shaking symptoms.
4
4
Share

Do I need to observe traffic lights when turning right ahead?

Turning right ahead requires observing traffic lights. Below are specific details about making U-turns at traffic light intersections: Signs: If there is no 'No U-turn' sign at the traffic light intersection and there is a sign allowing left turns on red, you can make a U-turn in the leftmost lane. Conditions for U-turns at traffic lights: There should be no signs or markings on the ground or overhead prohibiting left turns or U-turns. The left center line should have a dashed line segment (approximately 10 meters long, depending on the intersection size) or no line at all. Indicator signs: If there are central barriers, they should be removed from the vehicle stop line to the junction of the dashed and solid lines. There should be an indicator sign allowing U-turns at the junction of the dashed and solid center lines.
7
3
Share

What colors does the Superb come in?

The Skoda Superb is available in a variety of colors including Icon Gray, Castle Brown, Amber Brown, Gothic Black, Sapphire Blue, Moonlight White, Jade Gray, Brilliant Gold, Flowing Gold, Charming Red, Starlight Silver, and Colonnade White. More information about car colors is as follows: 1. Car color, as part of the vehicle's styling design, is directly influenced by the designer and affected by the vehicle's shape. 2. Relatively regular-shaped mid-to-large-sized sedans tend to have more conservative, understated, and stable designs. 3. Different shapes are paired with different colors from an aesthetic perspective, as suitable colors can better highlight the design of the shape and showcase the car's characteristics.
11
2
Share

How many seats does the Ferrari F12 have?

Ferrari F12 is a two-seater model. More information about the Ferrari F12 is as follows: 1. The Ferrari F12 is positioned as a mid-size sports car. Officially, the Ferrari F12 is positioned as a GT sports car, more inclined towards long-distance travel and comfort. 2. In terms of body dimensions, the length, width, and height are: 4618x1942x1273mm, with a wheelbase of 2720mm. 3. In terms of power, it is equipped with a 6.3-liter V12 naturally aspirated engine, paired with a 7-speed dual-clutch transmission, with a maximum power of 545KW, maximum horsepower of 741PS, and maximum torque of 690N·m.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.