What are the differences between DQ381 and DL382?

Can I get my car inspected without an ID card?

It is possible to have your vehicle inspected without an ID card. The following preparations should be made before the annual inspection: 1. Check if the vehicle has any traffic violation records. If there are any, go to the traffic police station to pay the fines and inquire about the violations. 2. It is advisable to go for the annual inspection as early as possible, as many vehicle owners find out during the inspection that their vehicles have outstanding violations, which prevents them from passing the inspection. 3. It is better to get the inspection done early in the month rather than later, as inspections are usually faster at the beginning of the month. The materials required for the annual vehicle inspection are as follows: 1. Small and micro non-operational passenger vehicles must be inspected every 2 years within the first 6 years. 2. After 6 years, the vehicle must be inspected annually. After 15 years, the vehicle must be inspected twice a year. The exhaust emission test is conducted along with the annual inspection, and a 'Yellow/Green Label' with a one-year validity period is issued.

6

0

Share

Is the Volkswagen Magotan clutch dry or wet?

Magotan clutch is a wet dual-clutch. The clutch plate is a composite material that primarily functions through friction while also meeting structural performance requirements. Automotive friction materials are mainly used to manufacture brake friction plates and clutch plates. The working principle of the clutch is as follows: 1. Disengagement when depressing the clutch: When starting the vehicle, the driver depresses the clutch, and the movement of the clutch pedal pulls the pressure plate backward, separating it from the friction plate. At this point, the pressure plate and flywheel are completely out of contact, resulting in no relative friction. 2. Full engagement when not depressing the clutch: During normal driving, the pressure plate tightly presses against the flywheel's friction plate, creating maximum friction between them. The input shaft and output shaft maintain relative static friction, rotating at the same speed. 3. Partial engagement (semi-engagement) when partially depressing the clutch: The friction between the pressure plate and friction plate is less than in full engagement. The pressure plate and flywheel's friction plate are in a state of sliding friction, with the flywheel rotating faster than the output shaft, transferring partial power from the flywheel to the transmission. In this state, the connection between the engine and drive wheels is equivalent to a soft connection.

11

2

Share

What is the recommended speed before the first maintenance of a new car?

The recommended speed before the first maintenance of a new car is 60 km/h in the city. On the highway, it is advisable not to exceed 100 km/h, and the engine speed should preferably not exceed 3000 rpm. The timing of the first maintenance varies depending on the car: it is usually performed after driving 1000~3000 kilometers. The car should undergo the first maintenance on time, neither earlier nor later. Completing the first maintenance indicates that the vehicle's break-in period has ended, and it can be driven according to the vehicle's specified standards and normal speed. The first maintenance time is calculated from the date of vehicle purchase. First maintenance items: The most important aspect of the first maintenance for a new car is not just changing the oil, but also conducting a comprehensive inspection and diagnosis of the vehicle's condition and usage. There are many items to be checked during the full vehicle inspection, mainly including whether the headlights are working, whether the high beams are functioning normally, their brightness and height, and whether the turn signals are all normal; whether the windshield wipers are cleaning effectively; whether the rubber seals are in good condition; whether there are any abnormal noises from the sunroof; whether the hinges of the doors are sufficiently lubricated; what the tire pressure is, and whether the pressure in all four tires is normal, etc. All these need to be checked.

10

4

Share

What is the impact of a 30-minute rear wheel camber angle on the vehicle?

Impact of a 30-minute rear wheel camber angle on the vehicle: Uneven inner tire wear, accelerated wear on suspension system components, and the vehicle tends to drift towards the side with less negative camber. Wheel camber angle adjustment ensures that the vehicle's load acts on the center of the tire, eliminating drift and reducing tire wear. Suitable camber angle degree: The camber angle is generally appropriate between 1-2 degrees. The so-called camber angle refers to the angle between the wheel's plane and the vertical longitudinal plane when the wheel is installed, with the wheel's end tilting outward. When the tires appear to open in an "eight" shape, it is called negative camber, while a "V" shape opening is called positive camber. Sports cars or racing cars often use negative camber. Adjustment of rear wheel camber angle: The rear wheel camber angle can be adjusted using the eccentric screw on one end of the upper suspension arm, specifically designed for camber angle adjustment. If the vehicle model does not have an eccentric screw on the upper suspension arm and cannot be adjusted, it can be replaced with an adjustable arm, which offers a larger adjustment range and is easier to operate.

1

3

Share

Is a higher wattage motorcycle HID headlight brighter?

Is a higher wattage motorcycle HID headlight brighter? The brightness of xenon headlights is related to lumens, while the color of the light is related to the color temperature. D-series bulbs are generally 35W, and upgrading the brightness does not change the wattage of the bulb. D5S and D8S are 25W. Definition of xenon headlights: Xenon headlights, also known as HID gas discharge headlights, replace traditional tungsten filaments with high-pressure xenon gas enclosed in quartz tubes, providing higher color temperature and more focused lighting. Since xenon lights use high-voltage current to activate xenon gas to form an arc beam, they can continuously emit light between the two electrodes. The power of ordinary car bulbs reaches 65W, while xenon lights only require 35W, reducing the power consumption by nearly half. Function of xenon headlights: Xenon lights can significantly reduce the load on the vehicle's electrical system. The color temperature of xenon lights ranges between 4000K and 6000K, far exceeding that of ordinary bulbs. They are highly bright, and xenon lights offer various color options, with the original equipment generally being 4300K. Because their color temperature is close to that of halogen lights and they have strong penetration, they can enhance nighttime driving safety.

3

2

Share

Where is the rearview mirror adjustment switch for the Borgward BX5?

The folding of the Borgward BX5's rearview mirrors can be controlled via the buttons on the driver's side door. When passing on narrow roads, the mirrors can be electrically folded to avoid scratches. Additionally, the mirrors feature a heating and defogging function. Rearview mirrors are tools that allow the driver to directly obtain external information about the rear, sides, and lower parts of the car while seated in the driver's seat. Additional information: 1. The Borgward BX5 is equipped with a 1.4T turbocharged engine, delivering a maximum power of 150 horsepower and a maximum torque of 250 Nm. The car reaches its maximum torque at 1750-4000 rpm. In terms of the transmission system, the car is paired with either a 6-speed manual or a 6-speed automatic transmission, offering excellent power performance that fully meets the daily driving needs of the car. 2. The 1.4T turbocharged engine in the Borgward BX5 features a lightweight design with high performance, high comfort, low fuel consumption, and low emissions. Its direct fuel injection technology and lightweight mechanical control turbocharging ensure outstanding power performance, fully satisfying the power requirements for both starting and high-speed overtaking.

4

5

Share

What are the differences between DQ381 and DL382?

Can I get my car inspected without an ID card?

Is the Volkswagen Magotan clutch dry or wet?

What is the recommended speed before the first maintenance of a new car?

What is the impact of a 30-minute rear wheel camber angle on the vehicle?

Is a higher wattage motorcycle HID headlight brighter?

Where is the rearview mirror adjustment switch for the Borgward BX5?

Does driving a new car at high speed for 2000 kilometers have any impact?

What Causes the Squeaking Sound from the Front Wheel of a Motorcycle?

How to close the hood of a Toyota Corolla?

What is the spark plug model for Changan Eado?