What are the differences between domestically produced BMW and imported BMW?

What are the symptoms of a faulty car brake wheel cylinder?

When a car brake wheel cylinder is damaged, symptoms include oil leakage at the connection between the wheel cylinder and the oil pipe, and a soft feeling when pressing the brake pedal. After pressing the brake pedal, the steering wheel may noticeably pull to one side, which is likely caused by uneven brake pad wear or a faulty wheel cylinder. Additionally, after pressing the brake pedal, the pedal may not rise back up and lacks resistance, commonly referred to as the brake not returning to position. Below is more related information: 1. Abnormal noise during braking: When driving and pressing the brake, the brake system may emit sharp and harsh metal friction sounds. This could be due to thin brake pads, poor-quality brake pads, foreign objects in the brake pads, or rust on the brake disc. Usually, pressing the brake a few more times may alleviate the noise. If it doesn't improve, it's best to drive to a repair shop for inspection. 2. Brake shudder: One situation is feeling the brake pedal "kick back" during emergency braking, similar to a "thump, thump, thump" sensation. This is normal and occurs because the ABS is functioning, performing intermittent braking. The second situation is problematic, mostly occurring in older vehicles due to brake disc wear or uneven wear, causing the brake disc surface to lose its flatness. In such cases, the brake disc should be inspected immediately, and depending on the situation, resurfacing ("resurfacing the disc") or replacing the brake disc is recommended. 3. Soft brake: While driving and applying the brakes, the deceleration is minimal, and the braking distance is long. The causes of poor braking performance in a hydraulic brake system can generally be judged based on the brake pedal travel, the softness or hardness felt when pressing the pedal, and the stability after pressing the pedal. If the pedal height slowly decreases while maintaining braking, it indicates a rupture in the brake line, poor sealing at a connection, poor sealing of the master or wheel cylinder piston, or faulty return and outlet valves. First, press the brake pedal to observe any brake fluid leakage. If everything appears normal externally, then inspect the wheel cylinder or master cylinder for faults. If the pedal height slightly increases and feels elastic after several consecutive brake applications, it indicates air has entered the brake line.

15

1

Share

What Causes the Anti-Slip Light and ABS Light to Stay On?

ABS light can illuminate in various states, with different causes and solutions for each state, as detailed below: State 1: ABS warning light stays on (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS control unit from determining the vehicle speed or the wheel slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections in the system wiring or poor contact in the ABS relay can cause signal issues, leading to system failure. Solution: Inspect the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple electrical components are in use, the battery voltage may drop below 10.5V. As the engine speed increases and voltage rises, the ABS warning light turns off. This may also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and verify the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; or a faulty ABS control unit. Solution: Loosen and retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary. Check for enlarged gaps in the connectors. Replace the ABS or ABS/ASR control unit if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: At high speeds, the ABS control unit detects a significant discrepancy between the rear and front wheel speed signals. This may also occur due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the fuel tank cap label. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and manually push the brake switch linkage down to its limit, then release the pedal to complete the self-setting process. Replace the brake light switch if necessary. If the ABS warning light is on, it is recommended not to continue driving. An illuminated ABS light indicates a fault in the anti-lock braking system. During emergency braking, locked wheels can cause the vehicle to skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.

7

2

Share

What are the precautions for safe driving in spring?

The precautions for vehicle safety in spring are as follows: 1. Pay attention to food hygiene: Due to the high mobility of driving work, it is important to choose clean and hygienic restaurants when dining to prevent infectious diseases. 2. Get adequate rest: Ensure sufficient sleep to stay energetic and focused, enabling safe driving. 3. Maintain a safe distance: While driving, keep sufficient longitudinal and lateral safety distances, always be aware of the movements of vehicles and pedestrians, and avoid driving too close to the vehicle in front or side by side to prevent rear-end collisions and side-swipe accidents.

19

0

Share

Can I pick up my driver's license a few days late?

You can pick up your driver's license a few days late because there is no national regulation specifying the exact time for license collection. Students only need to negotiate the pickup time with the local traffic management office. Below is relevant information about the motor vehicle driver's license: 1. Definition: The People's Republic of China Motor Vehicle Driver's License, commonly referred to as a driver's license or 'driver's permit,' is a mandatory credential for motor vehicle drivers established under the laws of the People's Republic of China. 2. Examination Content: The test subjects include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving), totaling three items.

3

Share

Which Brand of Cars Does Not Require a Driver's License?

To be precise, non-motor vehicles do not require a driver's license. The following is relevant information about driver's licenses: 1. Driver's License Categories: The motor vehicle driver's license classification system divides licenses into 15 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, and P. 2. Scoring and Review: The cumulative scoring cycle for road traffic safety violations (i.e., the scoring cycle) is 12 months, with a maximum score of 12 points, calculated from the date the motor vehicle driver's license is first issued. Based on the severity of road traffic safety violations, the points for a single violation are categorized into five types: 12 points, 6 points, 3 points, 2 points, and 1 point.

11

3

Share

Where is Hongqi produced?

Automobile brand Hongqi is from China, and its production location is in Changchun, Jilin. Hongqi is a high-end automobile brand directly operated by China FAW Group, managed by the headquarters of China FAW Group. In 1958, the Hongqi brand car was born and became the state car for national leaders and major national events. In the 1960s and 1970s, Hongqi cars became a banner of China's automobile industry. After the reform and opening up, while continuing to bear the important responsibility of "national car," Hongqi began to continuously impact the marketization and commercialization direction. Up to now, the models under the Hongqi brand on sale include: Hongqi HS5, Hongqi HS7, Hongqi EHS3, Hongqi H5, Hongqi H7, Hongqi H9, Hongqi L5, Hongqi E-QM5, Hongqi S9, Hongqi Shengshi, Hongqi Qijian, New Mingshi, and other models. Early models used the German 690V8 engine, later modified with the American 488 engine. Now, the Hongqi LS5 is equipped with a V12 engine independently developed by China FAW.

2

1

Share

What are the differences between domestically produced BMW and imported BMW?

What are the symptoms of a faulty car brake wheel cylinder?

What Causes the Anti-Slip Light and ABS Light to Stay On?

What are the precautions for safe driving in spring?

Can I pick up my driver's license a few days late?

Which Brand of Cars Does Not Require a Driver's License?

Where is Hongqi produced?

What is the display status of a revoked driver's license on 12123?

How Many Times Can You Fail the Driving Test Part 3 Before Disqualification?

What is the Hyundai with a red logo?

What is the reason for the new Sylphy's brake pedal being hard to press down and unable to start?