What are the differences between de2 and de3?

1 Answers
LauraFitz
07/30/25 9:33am
Here are the differences between de2 and de3: 1. Battery: The DE3 has a 48V20AH lithium battery; the DE2 has a 48V15AH lithium battery. 2. Braking system: The DE3 features front drum and rear disc brakes; the DE2 has front and rear drum brakes. Below is an introduction to the Yadea Guan Neng 2.0 DM6: 1. Performance: The Yadea Guan Neng 2.0 DM6 is equipped with a Graphene 3.0 battery, which is resistant to high and low temperatures, allowing it to operate normally in extreme environments with higher safety. Whether in winter or summer, it ensures normal travel. 2. Charging: The graphene battery can achieve over 2000 charge-discharge cycles, which is 3-5 times that of ordinary lead-acid batteries, making it more durable and cost-effective with lower single-use costs. Additionally, the battery is compact and lightweight, allowing for easy single-handed carrying and charging convenience.
Was this review help?
9
1
Share
More Forum Discussions

What procedures are required for renewing a C1 driver's license upon expiration?

According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the required materials for renewing a "Motor Vehicle Driver's License" upon expiration mainly include: 1. The identity proof of the motor vehicle driver. 2. The "Motor Vehicle Driver's License." 3. A medical certificate of physical condition issued by a county-level or above medical institution or a military medical institution at the regimental level or above. 4. For those applying for a special small automatic transmission passenger vehicle for the disabled, an additional medical certificate of physical condition issued by a specialized medical institution designated by the provincial health authority is required. Here are some additional details: 1. If the household registration of the motor vehicle driver is relocated outside the jurisdiction of the original vehicle management office, they can apply for a license renewal at the vehicle management office of the new location. 2. If the motor vehicle driver resides outside the jurisdiction of the vehicle management office where the license was issued, they can apply for a license renewal at the vehicle management office of their place of residence.
9
0
Share

What are the functions of the BMW X1 key?

Functions of the BMW X1 key: The key has only three buttons, which are unlock, lock, and trunk release. The remote key has a built-in mechanical key for emergency use. Press and hold the unlock button, and all four windows will lower simultaneously; press and hold the lock button, and all four windows will rise together. Replacing the battery in the BMW X1 key: Gently press the small switch on the back of the key to remove the mechanical key. Then, use the mechanical key to open the key cover by inserting it into the notch beside the key and gently prying it open. Once the key cover is opened, the old battery will be fully visible. A small flathead screwdriver can be used to remove the old battery. When installing the new battery, ensure the positive side is facing up. Reattach the key cover and mechanical key. Reasons why the BMW X1 key is unresponsive: If the key is out of battery, first remove the mechanical key, then pry open the plastic shell of the key to replace the coin cell battery, and reassemble it as per the original procedure. It could also be due to the car being parked in a signal interference zone, such as areas with many LED screens, communication operator base stations, or temporary signal control zones, which can affect the remote key's ability to unlock the doors.
9
1
Share

What is the difference between Michelin PS4 and PS4S?

Precision positioning differences, different formulations used, varying performance characteristics, and distinct tread designs are the key differences between Michelin PS4 and PS4S tires, as detailed below: Precision positioning differences: The Michelin PS4 is precisely positioned as an entry-level high-performance street tire 100% oriented towards urban communities; The Michelin PS4S primarily targets premium performance vehicle models, suitable for 80% street use and 20% track use. Different formulations used: The PS4 utilizes functional elastomer materials, silica compound and proprietary formulation, offering excellent wet surface grip; The PS4S employs twin compound formulation technology, with the outer tread area using a composite elastic formulation that enhances dry performance. Performance differences: The PS4 demonstrates excellent cornering performance and high-speed stability; The PS4S ensures more uniform tire contact pressure and temperature distribution. Tread design differences: The PS4 features a matte finish design on the tire sidewall markings; The PS4S adopts an ultra-dynamic tread pattern design.
1
4
Share

How to Remove and Install the Door Panel of the Envision?

The method for removing and installing the door panel of the Envision: Pry off the small decorative panel on the inner side of the door handle, remove the screws at that location and the door handle, then release the clips securing the door edge to complete the removal; installation is the reverse of these steps. More information about the Envision is as follows: 1. The Chinese name for the Buick ENVISION is 'Ang Ke Wei' (Envision). As a new-generation strategic model of General Motors, the Buick Envision's exterior design inherits the essence of the ENVISION Vision concept car, featuring a dynamic, elegant, and grand overall styling. 2. The front of the Envision adopts the family-style vertical chrome grille, wing-shaped intelligent xenon headlights, boomerang-shaped LED daytime running lights, and streamlined exterior rearview mirrors, creating a sharp and dynamic visual effect. The body features a full-frame integrated chrome window design, complemented by aluminum roof rails that follow the roofline and 19-inch large aluminum alloy wheels, giving it a visually striking appearance.
18
0
Share

Will There Be Color Difference After Painting and Sun Exposure for a Few Days?

If it's pearl white paint, there might be no color difference right after painting, but it could appear over time. Therefore, whether there will be color difference is uncertain and depends on the quality of the paint used. Here are some precautions after painting: 1. Pay attention to cleaning after painting: Try not to use water other than soft water, including hot water, alkaline water, and water with high hardness, as these components can damage the paint. If hard water is used to clean the vehicle, it may leave marks on the paint surface after drying. 2. Do not expose the car to strong sunlight: This can affect the car's paint surface and accelerate its aging. 3. Do not use high-pressure water flow to wash the car body: If there is hard dirt on the car, soak it with water first and then rinse it with water. Pay attention to the water flow method; use dispersed water flow for cleaning, as excessive water pressure can also damage the car's paint surface. 4. Use cleaning agents: If there are stubborn stains on the car body, choose cleaning agents with different properties. If there are dead insects or other plant and animal juices on the car body, soak them with soapy water first; then clean with a water-soaked sponge.
10
4
Share

What is the best way to deal with exhaust pipe joint leakage?

The best way to deal with exhaust pipe joint leakage is to first try replacing the joint gasket, as the leakage may be caused by aging of the gasket. The automotive exhaust corrugated pipe, also known as the automotive exhaust flexible pipe, is installed in the exhaust pipe between the engine exhaust manifold and the muffler. It provides flexible connection for the entire exhaust system, thereby reducing vibration and noise, facilitating installation, and extending the service life of the exhaust muffler system. Relevant information about automotive exhaust pipes is as follows: 1. Introduction: The automotive exhaust corrugated pipe, also known as the automotive exhaust flexible pipe, is installed in the exhaust pipe between the engine exhaust branch and the muffler. It provides flexible connection for the entire exhaust system, thereby reducing vibration and noise, facilitating installation, and extending the service life of the exhaust muffler system. 2. Application: It is mainly used for light vehicles, micro vehicles, and buses. Its structure consists of a double-layer corrugated pipe covered with a steel wire mesh sleeve and a clamping ring sleeve at both ends. To achieve better noise reduction, the corrugated pipe can be equipped with a telescopic joint or mesh sleeve inside.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.