What are the differences between Cooper and One?

1 Answers
LaIsaac
07/25/25 12:21am
The differences between Cooper and One are as follows: 1. Body configuration: The MINI One does not come with a sunroof, while the Cooper has a sunroof. 2. Engine: The MINI One is equipped with a 1.2T engine with a maximum power of 102 horsepower, while the Cooper has a 1.5T engine with a maximum power of 136 horsepower. 3. Fuel consumption: The Cooper's fuel consumption is approximately 15%-20% higher than that of the MINI One. 4. Different tire sizes: The Cooper has tire sizes of 205/45R17, while the MINI One has tire sizes of 195/55R16.
Was this review help?
4
4
Share
More Forum Discussions

What is the actual fuel consumption of the Honda XR-V?

The combined fuel consumption of the Honda XR-V is 6.0-6.3L/100km. Currently, there are 9 models of the Honda XR-V available for sale. The 1.5L-CVT Obsidian Edition, CVT Comfort Edition, and CVT Classic Edition have a combined fuel consumption of 6.0L/100km. The 1.5T-CVT Luxury Edition, CVT Flagship Edition, CVT Luxury Edition, CVT Comfort Edition, and CVT Obsidian Edition have a combined fuel consumption of 6.1L/100km. The Manual Classic Edition has a combined fuel consumption of 6.3L/100km. The above figures are the NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than these values, ranging from 6.0-11.0L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine computer controls higher idle speeds to warm up the car, which also increases fuel consumption.
20
2
Share

What Maintenance is Needed for a Car at 80,000 Kilometers?

At 80,000 kilometers, a major maintenance service should be performed, requiring a thorough inspection of the vehicle. In addition to the regular oil and oil filter replacement, it is also necessary to replace the air and cabin air filters, fuel filter, spark plugs, brake fluid, coolant, and transmission fluid. If some components have been replaced during recent maintenance, their condition should be checked to determine if replacement is needed. Additionally, the wear level of brake pads and tires should be inspected, as well as whether rubber components in the chassis or other areas have aged or cracked. Vehicle maintenance includes the following items: 1. Primary vehicle maintenance items: After completing primary maintenance, the vehicle should be clean, connections should be secure, the three filters should be clear, and there should be no leaks of oil, water, gas, or electricity. 2. Lubrication items for primary vehicle maintenance: Check the oil levels in the generator, transmission, rear axle, and steering gear, and add lubricating oil as required. All oil nozzles in various parts of the vehicle should be complete and functional. 3. Inspection and tightening items for primary vehicle maintenance: Check the steering gear, tie rods, drag links, and the tightness of all steering arm connections.
20
5
Share

What is the best engine oil for Volkswagen Golf?

Volkswagen Golf uses original equipment manufacturer (OEM) engine oil, which is produced by Great Wall Lubricant or Shell with a specification of 5W-40 semi-synthetic oil. The official manual recommends using 5W-40 semi-synthetic oil. For Volkswagen Golf models with naturally aspirated engines, semi-synthetic oil is suitable, while models with turbocharged engines require full synthetic oil. If you want to change the oil during later maintenance, you can choose brands such as Shell HX5 SM, Castrol, or Mobil with a specification of 5W-40. The viscosity of engine oil changes with temperature, so it is important to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The second number represents the kinematic viscosity of the oil at 100°C. A higher number means the oil can maintain its viscosity better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Volkswagen Golf is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until no more oil flows out. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain. Use a specialized wrench to remove the oil filter. Apply some oil to the oil seal of the new oil filter and tighten it clockwise by hand. Add the new oil through the oil filler cap on the engine valve cover. Generally, fill about three-quarters of the oil container. Start the engine and let it run for 5 minutes. Check for any oil leaks around the oil drain plug and oil filter. If there are leaks, perform necessary repairs. After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.
18
1
Share

How many spark plugs does a car need to replace?

Generally, a car needs to replace 4 spark plugs at a time. Theoretically, even if you replace just one spark plug with the same brand and model, the discharge gap and resistance of the new and old spark plugs will differ. Not replacing all of them can lead to issues such as engine shaking, difficulty in acceleration, and increased fuel consumption. Steps for replacing spark plugs: Open the engine hood, lift the plastic engine cover, remove the high-voltage ignition wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the high-voltage ignition wires in the correct firing order and secure the cover back in place. If a spark plug is damaged, it can directly cause issues like leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and most notably, difficulty in starting the engine, affecting the vehicle's normal operation. Severe erosion of the spark plug, such as scarring at the top, damage, or melted electrodes, indicates that the spark plug is damaged and should be replaced.
3
4
Share

Is it allowed to make a turn on a pedestrian crossing?

Making a turn on a pedestrian crossing is not allowed. If a vehicle needs to turn, it must do so after crossing the zebra crossing, following the guided route. Remember not to make a U-turn on the zebra crossing. Precautions for turning: When turning, the driver should, based on road and traffic conditions, signal the turn 50 meters before the curve and sound the horn to alert nearby vehicles and pedestrians. At the same time, the driver should appropriately reduce speed to maintain vehicle stability. Steering wheel operation should be coordinated with the speed, turning timely and returning early. After completing the turn, the turn signal should be promptly canceled. Yielding standards at pedestrian crossings: When pedestrians are crossing or about to step onto the zebra crossing in front of a motor vehicle, the motor vehicle should yield to the pedestrians. If pedestrians are waiting outside the separation line of the motor vehicle lane and non-motor vehicle lane and have not entered the motor vehicle lane, the motor vehicle should slow down and may proceed across the pedestrian crossing under safe conditions.
5
0
Share

How to Unlock an Airbag Seat That's Stuck?

If the airbag seat is locked, there is a locking handle on the seat adjustment lever. Simply pull the handle to unlock it. Airbag seats are typically equipped in long-distance buses and some trucks. These seats enhance driver comfort during long-distance driving. The height of the airbag seat can be adjusted via buttons, and the adjustment valve controls the inflation or deflation of the airbag to achieve seat height adjustment. Below are detailed explanations: 1. Car seats not only affect driving comfort and the fatigue levels of drivers but also ensure that the driver maintains a suitable sitting posture, which is crucial for driving safety. Airbag seats feature lumbar support and wrapping functions, fully leveraging the advantages of ergonomic design. They provide effective support for both the lower back and upper back, relieving pressure on the lumbar region. Even with prolonged use, issues like lumbar muscle strain can be avoided. Additionally, the lumbar support function, which allows for front and rear height adjustments, enables individuals of different body types to find their ideal support angle. 2. As the name suggests, airbag seats use air pressure as the seat carrier, placing the soft seat on a large airbag. Bumps from the road and vehicle body are effectively absorbed and dampened by the airbag's pressure fluctuations, achieving a shock-absorbing effect. Combined with the seat's lumbar support and wrapping features, this configuration further enhances the desired comfort. This cost-effective and highly effective truck feature has now become a standard in most domestically produced heavy-duty trucks.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.