What are the differences between China V and China VI vehicles?

1 Answers
PiperDella
07/29/25 5:10am
The differences between China V and China VI emission standards are as follows: Different emission standards: The China VI emission standard is more than 30% stricter than China V. Excluding the influence of working conditions and testing, gasoline vehicles' carbon monoxide emissions are reduced by 50%, total hydrocarbons and non-methane hydrocarbons emissions are reduced by 50%, and nitrogen oxide emissions are reduced by 42%. Different implementation times: The China V standard was implemented nationwide on January 1, 2017, as the fifth phase of the national motor vehicle emission standard. China VI has been implemented since July 1, 2019. Different principles: During the China V phase, diesel and gasoline vehicles had different emission standards, but China VI adopts a fuel-neutral principle, meaning that regardless of the fuel type, the emission limits are the same. Different issuing authorities: The China V standard was issued by the Ministry of Environmental Protection. The China VI standard was issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection, and Quarantine. Different letter representations: China V is represented by 'V,' while China VI is represented by 'VI.' Different monitoring requirements for plug-in hybrid electric vehicles: Compared to China V, China VI has improved monitoring requirements for plug-in hybrid electric vehicles, including energy storage systems, thermal management systems, brake regeneration, drive motors, generators, and other regulatory aspects. China V standard limits are as follows: Gasoline vehicles must not emit more than 1,000 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 milligrams of PM (particulate matter) per kilometer driven. China VI has two standards: China VIa and China VIb. The details are as follows: China VIa standard limits: Gasoline vehicles must not emit more than 700 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 milligrams of PM per kilometer driven. China VIb standard limits: Gasoline vehicles must not emit more than 500 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 35 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 35 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 3 milligrams of PM per kilometer driven. Affected by the China VI emission policy, although China V vehicles currently do not impact normal use and are not subject to driving restrictions or license plate limitations, their resale value will be significantly affected. For car owners, if they purchase a truck for freight transport via a loan, the vehicle's depreciation after repaying the loan is equivalent to the net profit earned during that period. A higher residual value means more profit for the owner. Therefore, from this perspective, China VI vehicles, with longer service life and more road rights, offer greater advantages.
Was this review help?
18
3
Share
More Forum Discussions

How to reset the maintenance reminder for the 2015 Ford Escort?

Method to reset the maintenance reminder for the 2015 Ford Escort: 1. With the engine turned off, press and hold the short-distance trip counter reset button located below the tachometer. 2. Turn the ignition switch to the ON position, then release the short-distance trip counter reset button. The display will show the SERVICE indicator. 3. Pull out the minute button on the clock and turn it to the right. The mileage will appear on the display. 4. Turn off the engine to reset the reminder message. 5. Turn the ignition switch back to the ON position, and the SERVICE indicator will disappear. The Ford Escort is a compact car produced by Changan Ford, with dimensions of 4587mm in length, 1825mm in width, and 1490mm in height, and a wheelbase of 2687mm. In terms of suspension, the front suspension of the Ford Escort is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.
13
2
Share

Why is there frost inside the car windshield?

The reason for frost inside the car windshield: After leaving the car, residual heat inside the vehicle keeps the glass temperature higher than the outside. If the external temperature is too low or it's snowing, the snowflakes landing on the glass will melt initially. As the interior temperature gradually drops to match the outside temperature, the melted snow on the glass begins to freeze. Once frozen, any additional snowflakes won't melt, and the moisture on the glass solidifies into ice beads, forming frost on the glass. Solutions: 1. Warm up the car sufficiently to allow the engine coolant temperature to rise; 2. Once the engine coolant temperature rises, turn on the heater and set it to blow upward toward the windshield to quickly increase the front windshield temperature; 3. When the heater melts the external frost, gently wipe the frost with a car cleaning cloth to accelerate the melting process; 4. After all the external frost has melted, use the windshield wipers to remove any water stains from the glass surface.
2
3
Share

What brand of engine is equipped in the Lynk & Co 02?

Lynk & Co 02 is equipped with Volvo's DriveE series 2.0TD engine, which has a maximum horsepower of 190 hp, a maximum power of 140 kW, a maximum torque of 300 Nm, a maximum power speed of 5000 rpm, and a maximum torque speed ranging from 1450 rpm to 4000 rpm. In terms of appearance, the Lynk & Co 02 continues the family style pioneered by the Lynk & Co 01, evolving into urban opposition aesthetics, featuring an urban skyline front face, with integrated headlights and grille design that makes the front of the car appear wider. As for the body dimensions, the Lynk & Co 02 measures 4448 mm in length, 1890 mm in width, 1528 mm in height, with a wheelbase of 2702 mm.
17
4
Share

What are the symptoms of a faulty turbocharger?

Turbocharger failure symptoms: 1. Insufficient power; 2. Blue or white smoke from the exhaust pipe; 3. Increased fuel consumption; 4. Unstable turbo pressure, etc. A turbocharger is an air compressor that increases air intake by compressing air. It uses the inertial impulse of exhaust gases from the engine to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller compresses the air delivered from the air filter pipe, pressurizing it before it enters the cylinder. Since turbochargers often operate at high speeds and temperatures, it is important to avoid driving immediately after starting the engine and not to shut it down immediately. Additionally, regular inspections and maintenance of the turbocharger are necessary.
12
0
Share

Where is the air conditioning filter of the X-Trail located?

The air conditioning filter of the X-Trail is located on the right side of the driver's accelerator pedal. You need to open a cover panel on the lower left side of the center console. There are 4 clips behind the cover panel, so be careful not to break them. After opening the cover panel, you can see the filter cover panel. In terms of body dimensions, the X-Trail measures 4675 mm in length, 1820 mm in width, and 1722 mm in height, with a wheelbase of 2706 mm. For the interior, the X-Trail is equipped with advanced technologies such as a digital 6-disc high-fidelity theater CD plus audio sound system, intelligent remote key system, intelligent voice navigation system, ASCD cruise control system, rearview camera, side-view system, multimedia entertainment system, anti-glare interior rearview mirror, outside temperature display, and intermittent multi-level adjustable front wipers.
14
4
Share

What is the purpose of a clutch?

Clutch is a device used to ensure smooth starting of the car and achieve smooth gear shifting. It is located in the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. During driving, the driver can press or release the clutch pedal as needed to temporarily separate and gradually engage the engine and the transmission, thereby cutting off or transmitting the power from the engine to the transmission. The clutch is a common component in mechanical transmission, which can separate or engage the transmission system at any time. Its basic requirements include: smooth engagement, quick and thorough separation; easy adjustment and repair; small external dimensions; light weight; good wear resistance and sufficient heat dissipation capacity; easy and labor-saving operation. Commonly used clutches are divided into two types: jaw type and friction type.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.