What are the differences between Changan Mazda and FAW Mazda?

1 Answers
DiRachel
07/24/25 10:15pm
The differences between Changan Mazda and FAW Mazda are: 1. Different models produced: Changan Mazda's models include the CX-3 (imported), CX-5, CX-8, Mazda 2, and Axela, etc.; FAW Mazda's models include the CX-4, CX-7, CX-9, Mazda 6, and Ruiyi, etc. 2. Different headquarters: Changan Mazda's headquarters is in Nanjing; FAW Mazda's headquarters is in Changchun, Jilin. Taking the 2020 Axela as an example, it is a compact car with body dimensions of 4662mm in length, 1797mm in width, 1445mm in height, a wheelbase of 2726mm, and a fuel tank capacity of 50 liters.
Was this review help?
20
1
Share
More Forum Discussions

Is There a Toll-Free Policy on Highways During the Mid-Autumn Festival Holiday?

Highway tolls are charged as usual during the Mid-Autumn Festival holiday, with no exemption. Here is relevant information about highway tolls: Highway Toll Standards: There are two types of highway tolls: open tolling and closed tolling. Open tolling involves collecting an IC card at the entrance toll station of the highway and presenting it at the exit toll station, where the toll collector will swipe the card and charge the displayed fee. This method is commonly used for longer highway routes, and most intercity highways in China adopt this tolling approach. Highway Toll Process: The toll collector inputs the vehicle type into the toll computer, which calculates the fee and displays the amount on the toll display. The voice quotation system announces the fee, and after confirmation by the toll collector, an invoice is issued, and the vehicle is allowed to proceed.
1
3
Share

What transmission is used in the 2019 Audi A4L?

2019 Audi A4L uses the DL382 transmission model, which is a 7-speed dual-clutch transmission. More information about the 2019 Audi A4L transmission is as follows: 1. Many models under Volkswagen and Audi use dual-clutch transmissions. This type of transmission is developed based on manual transmissions. The structure of a dual-clutch transmission is similar to that of a manual transmission, but it has an additional set of clutches and a shift control mechanism; 2. One set of clutches in the dual-clutch transmission controls odd-numbered gears, while the other set controls even-numbered gears; 3. The dual-clutch transmission is connected to the engine via clutch plates, resulting in higher transmission efficiency; 4. The manufacturing and development costs of dual-clutch transmissions are relatively low, so using this type of transmission can reduce the overall manufacturing cost of the vehicle. However, many performance cars and supercars also use dual-clutch transmissions because, for these vehicles, the most important factors are transmission efficiency and shift speed.
13
0
Share

What are the dimensions of the Mercedes-Benz GLC?

The dimensions of the Mercedes-Benz GLC are 4765mm in length, 1898mm in width, and 1648mm in height, with a wheelbase of 2973mm. Compared to the current model, the wheelbase has been extended by 100mm, the body length increased by 104mm, and the height reduced by 16mm. More details about the Mercedes-Benz GLC are as follows: Interior: The new GLC long-wheelbase version continues the current design, adopting an interior similar to the C-Class, featuring classic twin-barrel instrument dials with red pointers and target-ring patterns. The minimalist wood-grain lacquered center console is paired with a 3-color adjustable ambient lighting system, an 8.4-inch high-resolution color display, and a 13.97cm color multifunction instrument screen. Powertrain: The Beijing Mercedes-Benz GLC-L continues with the previous powertrain setup, equipped with differently tuned M274 2.0T engines, corresponding to the GLC-260-L and GLC-300-L models, mated to a 9AT transmission.
17
2
Share

What is the minimum ground clearance of the Audi Q7?

Audi Q7's minimum ground clearance is 201mm. More details about the Audi Q7 are as follows: 1. The Audi Q7 is equipped with the newly tuned air suspension system of the Audi family. The new Audi Q7 allows the driver to switch freely between comfort mode, dynamic mode, automatic mode, off-road mode, and lift adjustment mode. The comfort and dynamic adjustment modes can improve driving comfort or provide greater driving power. When driving on ordinary roads, the Q7 can provide a ground clearance of 210 mm. If the speed is maintained above 180 km/h for 20 seconds, the ground clearance will automatically adjust to 170 mm. This lowering of the body height helps to lower the center of gravity and improve driving stability. 2. The Audi Q7 has a good foundation for off-roading, with a maximum wading depth of 500mm and a maximum sustained climbing angle of 31°. Its approach angle and departure angle are 22.2 degrees and 20.2 degrees, respectively. Its minimum turning radius is 6.2m. The Audi Q7 is standard equipped with the characteristics of an SUV that can handle off-road conditions while also taking into account comfort.
8
3
Share

What are the dimensions of the Nissan Murano?

Nissan Murano's body dimensions, taking the 2019 Nissan Murano as an example, are as follows: length x width x height is 4897x1908x1691mm, with a wheelbase of 2830mm. More information about the Murano is as follows: 1. The Murano has a very distinctive appearance. Even when compared to seven-seater models like the Highlander, the Murano's body shape is not much different from the Highlander's. The wheelbase refers to the distance between the centers of two wheels on the same side, which determines the size of the interior space of a car. The Murano's interior space is very large. With its aggressive exterior design, these dimensions provide even more visual impact. 2. The Murano is equipped with a 2.5L naturally aspirated engine with the model number QR25DE. The engine's maximum output power is 186 horsepower, and the maximum torque is 229 Nm. The engine's cylinder head and block are both made of aluminum, and it is equipped with C-VTC continuous variable valve timing technology. The fuel supply method is multi-point electronic injection.
8
1
Share

Why can't the car start even after jump-starting the battery?

Here are the reasons why jump-starting may not start the car: 1. Confirm whether the voltage of the connected battery is correct, and also check if the jump-start cables are thick enough and the connections are secure. 2. There might be issues with other vehicle components, and it is recommended that the owner tow the car to a 4S shop for inspection. Below are the steps for jump-starting a car: 1. Both your vehicle and the rescue vehicle must be turned off; 2. The order for connecting the jumper cables is to first connect the positive terminal of the dead battery to the positive terminal of the rescue vehicle, then connect the negative terminal of the dead battery to the negative terminal of the rescue vehicle; 3. After ensuring all devices in the dead vehicle are turned off, start the rescue vehicle, then start the dead vehicle, and let the dead vehicle run for a while to charge once it starts normally; 4. Once the vehicle is running normally, remember that the order for removing the jumper cables is the reverse of the connection order.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.