What are the differences between Changan Kaicheng and Changan Kuayue?

2 Answers
Drew
07/24/25 4:17am
The differences between Changan Kaicheng and Changan Kuayue are as follows: 1. Endurance capability: Changan Kaicheng has a wading depth of 900mm, an 80L super-large fuel tank, and an ultra-long endurance capability of 1000 kilometers; Changan Kuayue is a zero-pollution pure electric logistics vehicle with a cargo space of 4.7m³, a battery capacity of 48.5Kwh, and a driving range of up to 250km. 2. Power: Changan Kaicheng is equipped with a Japan Isuzu 2.5T diesel engine and a Mitsubishi 2.4T gasoline engine; Kuayue is equipped with a 1.5L gasoline engine model DK15.
Was this review help?
17
0
Share
DelAlessandra
08/10/25 11:54pm
I've driven quite a few commercial vehicles, and I feel that Changan Kaicheng is like a big family brand, covering various models such as pickups, light trucks, and microvans, all very practical for different scenarios. Changan Kuayue, on the other hand, is a sub-series under Kaicheng, mainly focusing on micro-truck models, like those small cargo vans. When I used Kuayue on construction sites, I felt its design was more compact, suitable for urban narrow streets, with low fuel consumption but limited load capacity. Other models under Kaicheng have stronger power, like pickups suitable for field operations. Price-wise, Kuayue is more affordable, while Kaicheng offers higher overall value for money. The key difference lies in the market segments: Kaicheng covers a wide range, while Kuayue specializes in micro-trucks for daily errands. If you're in logistics, choosing Kuayue is hassle-free; if you need a multi-purpose vehicle, Kaicheng is much more flexible. However, regular maintenance is crucial for both—don't overlook engine checks.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

What to Do When the Battery of Buick GL8 Runs Out of Power?

The most reliable solution when the battery of a Buick GL8 runs out of power is to promptly contact a rescue vehicle, then connect jumper cables to temporarily charge the battery and start the engine. Below are some relevant tips: 1. Push-starting is the most common and effective emergency starting method. However, this is a last resort and should not be used frequently, as it can cause some damage to the engine and clutch, especially in automatic transmission vehicles. 2. To avoid being unable to charge the battery when it runs out of power, car owners should keep a set of jumper cables in the vehicle, which can be purchased at most auto parts stores. However, it is crucial not to reverse the connection order of the jumper cables. 3. First, connect the positive terminal of the dead battery to the positive terminal of the rescue vehicle's battery, then connect the negative terminal of the rescue vehicle's battery to a metal part in the engine compartment of the dead vehicle (grounding). After connecting the jumper cables, start the rescue vehicle's engine and slightly increase the engine speed. After about 5 minutes, the dead battery will receive an emergency charge. Once charging is complete, remove the jumper cables in the reverse order of their connection.
18
5
Share

How to Remove the Key from a Volkswagen Magotan?

Press the small button on the side of the key's end cap to pull out the key blade; push the chrome cap at the end of the key sideways—once you hear a click, you can pull the cap upwards; use your thumbs to press into the side grooves and pry open the key case to disassemble it. Below is some related information about the Magotan: 1. In terms of powertrain, the Magotan continues to use Volkswagen's most advanced TSI+DSG golden combination, offering consumers three displacement options: 1.4TSI, 1.8TSI, and 2.0TSI. Additionally, the flagship model will also be equipped with a 3.0V6 FSI engine, elevating the Magotan brand to new heights. 2. For the suspension, the Magotan features a lightweight and optimized MacPherson front suspension and a newly tuned multi-link rear independent suspension, delivering a more stable and precise driving experience. In terms of safety, the Magotan boasts up to 79 safety configurations, reflecting the comprehensive safety philosophy of German premium sedans and making it the undisputed leader in safety systems in the B-segment market.
8
3
Share

How to Turn on the Fog Lights of a Corolla?

The fog light switch of the Corolla is located on the inner side of the control lever and is operated by rotation. Turn it upwards once to turn on the front fog lights, and turn it twice to the rear fog light position, which turns on both the front and rear fog lights simultaneously, and vice versa to turn them off. Here are some related details: 1. After turning on the parking lights, you can turn on the fog lights. The front fog lights can be turned on individually, while the rear fog lights can only be turned on together with the front fog lights and cannot be turned on individually. 2. You can check whether the fog lights are on by looking at the icons on the dashboard. As long as you see the front and rear fog light indicators on the dashboard light up, you can confirm that the corresponding fog lights are on. Additionally, when encountering foggy weather, avoid turning on the high beams because fog reflects light, and the high beams will reflect back into the car, reducing the driver's visibility. 3. However, Corolla owners should note that although fog lights help make the vehicle or pedestrians more visible, this does not mean they can be used at any time, especially when both front and rear fog lights are on. Fog lights are brighter than regular lights and have strong scattering. If they are turned on unnecessarily, they will only interfere with the vision of other drivers, especially those of oncoming vehicles, and may cause accidents. Therefore, traffic regulations in many countries clearly stipulate that fog lights are prohibited from being turned on when visibility is good.
1
3
Share

What is the fuel tank capacity of the Soueast DX3?

The fuel tank capacity of the Soueast DX3 is 45 liters, as officially announced. Owners who have purchased the Soueast DX3 can also check this information on the vehicle's configuration sheet. The recommended fuel grade for the Soueast DX3 is 92 octane, with a fuel consumption of 6.9 to 7.3 liters per 100 kilometers. A full tank of fuel can cover a distance of 616 to 652 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space ensures that the fuel can expand when the temperature rises without overflowing. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
15
1
Share

How to Check Tire Pressure on Buick Excelle?

Method to check tire pressure on Buick Excelle (not available for base models): 1. Press the "MENU" button on the turn signal lever to switch the small screen on the instrument panel to the "Vehicle Information Menu." 2. The Vehicle Information Menu has only two pages: overspeed alarm and tire pressure monitoring. 3. If the overspeed alarm is displayed, rotate the knob at the top of the left lever to switch to the tire pressure monitoring information, where you can view the tire pressure of all four wheels. Buick Excelle tire pressure monitoring reset method: 1. First, park the vehicle, engage the handbrake, and operate with the vehicle powered on. 2. Press the MENU button on the turn signal lever to switch the small screen on the instrument panel to the Vehicle Information section. 3. Rotate the up and down selection buttons on the turn signal lever to find the tire pressure information section. 4. Press and hold (long press) the SET/CLR function button at the head of the turn signal lever until the display shows whether to perform tire pressure learning, then select "Yes." 5. After selection, the horn will sound twice to confirm the start of tire pressure learning. 6. At this point, the left front turn signal will light up, and then proceed to deflate the tire. The order is: left front, right front, right rear, left rear. Unscrew the valve cap to release air from the tire. When the horn sounds once and the current tire's turn signal turns off while the right turn signal lights up, you can release the valve. 7. With the right turn signal lit, repeat the above method to continue deflating the right front tire until the horn sounds once and the right turn signal turns off, then stop deflating. 8. Proceed in order, observing the tire pressure status of each tire on the instrument panel. The tire pressure will be lower than normal, so you need to inflate the tires in sequence to bring the pressure back to the normal range, generally between 2.3~2.5. This completes the tire pressure reset.
6
2
Share

What will an A1 driver's license be downgraded to?

An A1 driver's license will be downgraded to an A1A2 license. The vehicle types permitted by an A1 driver's license include large buses that can carry more than 20 passengers, as well as passenger vehicles with a body length exceeding 6 meters, which also require an A1 license. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the following circumstances apply to drivers holding licenses for large buses, tractors, city buses, medium-sized buses, or large trucks: The vehicle management office shall revoke their highest permitted driving qualification and notify the driver to complete the downgrade and license replacement within 30 days under the following conditions: 1. Involvement in a traffic accident resulting in death, bearing equal or greater responsibility, without constituting a crime; 2. Accumulating 12 penalty points within one scoring cycle; 3. Failing to undergo inspection for three consecutive scoring cycles. If the driver does not complete the downgrade and license replacement within the specified time, the vehicle management office shall announce the revocation of the highest permitted driving qualification. Permitted vehicle types for an A1 license: According to the "Permitted Vehicle Types and Codes" (Order No. 139 of the Ministry of Public Security of the People's Republic of China), an A1 license permits driving large buses and large passenger vehicles, and also allows driving vehicles under A3, B1, B2, C1, C2, C3, C4, and M categories. Permitted vehicle types for an A3 license: According to the "Permitted Vehicle Types and Codes" (Order No. 139 of the Ministry of Public Security of the People's Republic of China), an A3 license permits driving city buses with a capacity of 10 or more passengers. Other permitted vehicle types include C1 (small cars), C2 (small automatic cars), C3 (agricultural four-wheel vehicles), and C4 (agricultural three-wheel vehicles). Permitted vehicle types for a B1 license: According to the "Permitted Vehicle Types and Codes" (Order No. 139 of the Ministry of Public Security of the People's Republic of China), a B1 license permits driving medium-sized buses with a length of less than 6 meters and a passenger capacity of more than 9 but fewer than 20 people. Other permitted vehicle types include C1, C2, C3, C4, and M. Permitted vehicle types for a B2 license: According to the "Permitted Vehicle Types and Codes" (Order No. 139 of the Ministry of Public Security of the People's Republic of China), a B2 license permits driving heavy and medium-sized trucks, as well as heavy and medium-sized specialized operation vehicles. Other permitted vehicle types include C1, C2, C3, C4, and M. Documents required for a driver's license downgrade application: 1. Original "Motor Vehicle Driver's License Application Form"; 2. Original and photocopy of the driver's identity proof; 3. Original motor vehicle driver's license; 4. For age-related or medical condition-related downgrades, a "Motor Vehicle Driver's Physical Condition Certificate" issued by a county-level or military medical institution at or above the regimental level is also required; 5. Three recent front-facing, bareheaded, white-background color ID photos (must be taken at a photo point equipped with an ID photo transmission system, along with a digital photo collection receipt printed by the photo point).
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.