What are the differences between CFMOTO 1250 and Benelli 1200?

1 Answers
AlexisMarie
07/24/25 9:30am
Here are the differences between CFMOTO 1250 and Benelli 1200: Appearance: The CFMOTO 1250 appears more refined. Its split headlight design features a large area with two 'T'-shaped LED light strips inside, giving a very imposing visual effect, somewhat reminiscent of Volvo's 'Thor's Hammer' design. In contrast, the Benelli 1200's integrated headlight looks bulkier and bears a strong resemblance to its flagship cruiser, the 600GS. Performance: The CFMOTO 1250 model. This premium cruiser is equipped with a V-twin liquid-cooled engine sourced from KTM, with a displacement of 1278cc and a maximum output of 142.8 horsepower. The Benelli 1200 uses its own triple-cylinder engine, with a displacement of 1209cc and a maximum horsepower of approximately 135.
Was this review help?
9
3
Share
More Forum Discussions

Does the Toyota Corolla have a timing belt?

Toyota Corolla uses a timing chain, not a timing belt. The specific details are as follows: 1. Rubber timing belts wear out over time along with other components such as tensioners, idler pulleys, and water pumps as the engine operates. 2. For engines equipped with timing belts, manufacturers have strict requirements to replace the timing belt and related components at specified intervals. 3. Timing chains, made of high-strength steel, effectively solve this issue. The strength of metal far exceeds that of rubber, significantly reducing deformation and making the occurrence of skipped teeth or breakage extremely rare.
12
3
Share

How to Remove a Diesel Fuel Filter?

Release the residual pressure in the fuel system. Locate the grounding wire and mounting bracket screws near the filter, then remove them. Next, detach the fuel inlet pipe and also remove the fuel outlet pipe beside the filter. Remove the old filter, place the new filter directly into the mounting bracket, and reconnect the fuel outlet pipe and grounding wire in reverse order.
10
4
Share

How is Car Horsepower Calculated?

Power (W) = 2π × Torque (N-m) × RPM/60. The horsepower of an engine refers to the output capacity of the engine, which is the output power. Power (kW) = Torque (N-m) × RPM (rpm)/9549. This is how the horsepower of a car is calculated.
16
2
Share

How to Claim for a Total Loss Vehicle?

Insurance vehicle suffers total loss. If the insured amount is higher than the actual value at the time of the accident, the compensation will be calculated based on the actual value at the time of the accident. The compensation is calculated according to the insured amount, i.e., Claim Amount = (Insured Amount - Residual Value) * Accident Liability Ratio * (1 - Deductible Rate).
17
0
Share

How to Operate the Car Light Switch?

The car light control button is located not only below the steering wheel but also near the door. To turn on the low beam, twist the button to the right twice, and the low beam will be activated. Twisting it to the right once turns on the parking lights, while pulling the button upward activates the front fog lights. Different lights serve various purposes.
7
1
Share

What to Do When Your Car Is Submerged in Water?

When a car is submerged in water, turn off the engine and do not restart it, then call for rescue. Try to use a wrench to loosen the screw securing the battery cable and remove the negative terminal of the battery. This requires the owner not to rashly open the door to get out, as it may cause the computer board to short-circuit due to water ingress.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.