What are the differences between Cayenne and Macan?

1 Answers
DiEliana
07/29/25 5:20pm
The differences between Cayenne and Macan are as follows: Different body types: The Cayenne is a mid-to-large size SUV, while the Macan is a mid-size SUV. There is a noticeable difference in body length between the two, but the height, width, and wheelbase are relatively similar. The Porsche Macan has a body length of 4696mm, width of 1923mm, height of 1624mm, and a wheelbase of 2807mm; the Porsche Cayenne has a body length of 4831mm, width of 1983mm, height of 1676mm, and a wheelbase of 2895mm. Different appearances: The Porsche Macan adopts a design similar to the Cayenne but is more aggressive. Compared to the Cayenne, the Macan has a lower and shorter body, but the hood is smoother. Additionally, the Macan features a large trapezoidal front grille with two large air intakes on either side. Above the side air intakes are horizontally placed LED daytime running lights, giving the body a more streamlined appearance.
Was this review help?
14
2
Share
More Forum Discussions

How to Disconnect the Battery?

Use a wrench to remove the wires at both ends of the battery to cut off the power. Below is relevant information about disconnecting a car battery: Disadvantages of Disconnecting: If the car is used infrequently, disconnecting the battery will clear the injection data of the engine computer, and other onboard computer data may also be erased, which is unfavorable for future car use. Frequent electrical pulses could also damage the chips and precision sensors of various onboard computers or devices. A simpler solution is to regularly (once a month) charge the battery with a charger, and it's best to drive the car more after starting it. Additional Information: The car distributor is a component in the ignition system of a gasoline engine that delivers high-voltage current to the spark plugs of each cylinder in the correct firing order. In a battery ignition system, the distributor and breaker are usually mounted on the same shaft and driven by the camshaft. It also includes an ignition timing adjustment device and capacitors. The breaker arm uses a spring to keep the contacts closed and a breaker cam to open them, with an opening gap of approximately 0.30 to 0.45 millimeters.
16
3
Share

How to Bleed the Brakes After Adding Brake Fluid?

Bleeding method after adding brake fluid: The air bleeding operation requires coordination between two people. One person continuously presses the brake pedal inside the vehicle to raise its position and holds it steady without releasing. Meanwhile, another person underneath the vehicle loosens the bleeder valve to allow air and brake fluid in the pipeline to discharge together. When the pedal position drops, immediately tighten the bleeder valve. Repeat this process multiple times until no air bubbles are discharged from the plastic tube, then tighten the bleeder valve and install the dust cover. Brake fluid, also known as hydraulic brake fluid, should be purchased from reliable manufacturers, and the higher the grade, the better. All liquids have the characteristic of being incompressible. In a sealed container or a liquid-filled pipeline, when the liquid is under pressure, it quickly and uniformly transmits the pressure to all parts of the liquid. Hydraulic braking works based on this principle.
6
0
Share

Should You Press the Clutch or Release the Accelerator First When Shifting Gears?

When shifting gears, you should release the accelerator first. The correct steps are: release the accelerator, press the clutch, shift gears, slowly release the clutch, and gently apply the accelerator. Gear shifting is the abbreviation for the operation method of the gear lever, referring to the driver's psychological and physiological movements to continuously change the position of the gear lever according to road conditions and vehicle speed changes. When shifting gears in a car, if you press the clutch first without releasing the accelerator, the connection between the engine and the drive wheels is disconnected. The engine has no load, but the accelerator is not released in time, causing the RPM to surge or resulting in a sudden engine roar. The key technique for driving a manual transmission car is the coordination between the accelerator and clutch. Mastering this coordination means grasping the essence of manual transmission driving, leading to smoother and more seamless driving.
1
5
Share

What is the purpose of car windshield washer fluid?

Car windshield washer fluid is used to clean the front windshield and is a consumable item in vehicle maintenance. It is primarily composed of water, alcohol, ethylene glycol, and other components, offering functions such as cleaning, antifreeze, and anti-fogging. Windshield washer fluids can be categorized by form into solid and liquid types, with solid washer fluids mostly designed for use in environments above 0 degrees Celsius. There are several types of washer fluids: one commonly used in summer contains insect-removing agents to quickly eliminate insect residues on the windshield; another is an antifreeze type specifically for winter use, ensuring it does not freeze or damage car components even when temperatures drop below -20 degrees Celsius; and a special antifreeze type that remains unfrozen at -40 degrees Celsius, suitable for the extreme cold regions of northern China.
19
2
Share

What engine is used in the Mazda3 Xingcheng?

The Mazda3 Xingcheng adopts the world-advanced all-aluminum MZR engine. Below are extended details about the all-aluminum MZR engine: Lightweight aluminum alloy pistons: The lightweight aluminum alloy material can adapt to the temperature conditions of lean mixture combustion. The piston section undergoes acid-resistant aluminum treatment to enhance wear resistance. Additionally, a graphite coating is applied to the piston friction areas to improve abrasion resistance and reduce operational noise. Box-type balancer shaft: This achieves precise transmission coordination through meshing with the engine crankshaft, optimally reducing engine vibration during transmission, ensuring smooth operation and noise reduction. Integrated crankshaft main bearing cap: The integrated crankshaft installation bearing shells ideally ensure the coaxiality of the engine crankshaft and installation precision, reducing engine operational noise and extending the service life of the crankshaft and bearing shells, thereby prolonging the engine overhaul cycle. The lightweight aluminum alloy engine significantly reduces weight, enhancing vehicle acceleration performance and markedly improving fuel economy.
7
3
Share

How to turn on the low beam headlights of Nissan Sylphy?

Method to turn on the low beam headlights of Nissan Sylphy: Rotate the light control lever on the left side of the steering wheel forward. Rotating it twice turns on the low beam headlights, while rotating it once turns on the front position lights, instrument panel lights, and rear combination lights. When the headlights are on, pushing the entire light control lever forward turns on the high beam headlights, returning it to the original position turns off the high beam, and pulling it backward flashes the headlights once. The Sylphy is a compact sedan under Nissan, with dimensions of 4641mm in length, 1815mm in width, and 1450mm in height, and a wheelbase of 2712mm. In terms of power, this car is equipped with a 1.6L naturally aspirated engine across all variants, delivering a maximum power of 99kW and a maximum torque of 159Nm.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.