What are the differences between C1, C2, and C3 driver's licenses?

2 Answers
Kenneth
07/29/25 4:06am
The following is a detailed introduction to the differences between C1, C2, and C3 driver's licenses: 1. The vehicles used during the test for C1, C2, and C3 are manual transmission cars, automatic transmission cars, and low-speed trucks respectively. 2. The vehicle types permitted for C1, C2, and C3 are manual transmission, automatic transmission micro special operation vehicles, small and micro automatic transmission passenger cars, as well as light and micro automatic transmission cargo vehicles and low-speed trucks. The following is additional information about the C-class driver's license: 1. The C-class driver's license is divided into: C1, C2, C3, C4, C5. C1 is for small cars, C2 is for small automatic transmission cars, C3 is for low-speed trucks, C4 is for three-wheeled cars, and C5 is for small automatic transmission passenger cars specially designed for disabled people. 2. When taking the driver's license test, the type of license to be tested depends on your choice, as long as your physical conditions meet the requirements.
Was this review help?
3
2
Share
LaSimon
08/12/25 7:51am
C1, C2, and C3 are categories of Chinese driver's licenses, but they serve very different purposes. The C1 license is for manual transmission small vehicles, allowing the holder to drive both manual and automatic passenger cars and light trucks with a total weight not exceeding 4.5 tons, such as common family sedans and minivans. The C2 license is restricted to automatic transmission small vehicles, with simpler tests that don’t involve clutch operation, making it ideal for urban commuting. The C3 license is specifically for low-speed trucks, like agricultural vehicles or tractors, with speed limits in a lower range, and is not intended for everyday vehicles. When choosing, the C1 offers the broadest coverage, enabling you to drive a variety of vehicles once obtained; the C2 is more convenient and quicker to obtain; while the C3 is mainly for rural or specific work scenarios. I think many people overlook the applicable scope of the C3—it’s not suitable for daily driving and carries higher safety risks.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

How to Remove the Headlights of Nissan X-Trail?

Nissan X-Trail headlight removal method: 1. After opening the hood, unscrew the two plastic screws behind the headlight, then pull the iron hook outward to the end to remove the headlight; 2. Feel below the connector with your hand to find the buckle, press it down to disconnect the wiring harness; 3. After unplugging the wiring harness, the headlight assembly removal is complete. The Nissan X-Trail is a compact SUV produced by Dongfeng Nissan, with dimensions of 4675mm in length, 1820mm in width, and 1722mm in height, and a wheelbase of 2706mm. In terms of interior, the Nissan X-Trail has been upgraded with a new LCD instrument panel and a floating central control screen, and is also equipped with a new electronic gear shift mechanism below, creating a strong technological atmosphere.
7
4
Share

What is the oil film on the car's front windshield?

It may be caused by dust or other substances in the air remaining in the pores, which gradually form an oil film. The following is a related introduction about car windshields: Precautions: The windshield must be replaced correctly. To prevent wind and water leakage, do not wash the car for three days, and remove the tape fixing the windshield position after three days. Drive smoothly and avoid emergency braking and sudden acceleration. Function: The reflection of passengers inside the car through the front windshield is imaged above the front of the car, while pedestrians on the road are in front of the car, allowing the driver to distinguish between passengers inside the car and pedestrians on the road. The car's windshield is placed vertically, like a large flat mirror, which will image the passengers inside the car in front of the car, hindering the driver's ability to see pedestrians on the road and easily causing illusions.
20
4
Share

How to Replace the Coolant in a Peugeot 408?

The method for replacing the coolant in a Peugeot 408: 1. Remove the intake pipe at the front of the air filter, detach the intake pipe, select an easily accessible radiator hose, pull out the hose to let the coolant spray out; 2. Allow the coolant to drain completely, then begin pouring in new coolant; 3. After filling to the MAX line, tighten the cap, start the vehicle and press the accelerator a few times; 4. Turn off the engine, unscrew the cap to continue adding coolant, check for any leaks at the previously detached hose, and if there are no leaks, the replacement is complete. The Peugeot 408 is a compact sedan under the Peugeot brand, equipped with two engines: a 1.2-liter turbocharged engine and a 1.6-liter turbocharged engine. In terms of suspension, the Peugeot 408 uses a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
10
2
Share

How to Fold the Mirrors When Locking an Eighth-Generation Accord?

Press the brake pedal. Press the one-touch start button. Press the mirror folding button located on the control panel to the left of the steering wheel. Once the vehicle detects that it is locked, the mirrors will automatically fold in.
15
1
Share

How to disable the pedestrian protection device in the 10th generation Accord?

10th generation Accord pedestrian protection device disabling method: You can remove the pedestrian protection device sensor or unplug the sensor and insert a resistor. The Accord is equipped with a movable hinge at the end of the engine hood. When colliding with a pedestrian, the hinge drives the engine hood to sink, thereby achieving a buffering effect to reduce injuries. In terms of body dimensions, the 10th generation Accord has a length, width, and height of 4930mm, 1845mm, and 1470mm respectively, with a wheelbase of 2775mm. In terms of exterior configurations, the 10th generation Accord offers features such as full LED headlight assembly, LED front fog lights, headlight height adjustment, electric adjustment for exterior rearview mirrors, heating, folding, and chrome-plated dual exhaust pipes.
13
2
Share

How to distinguish between imported and domestic Kawasaki pumps?

The side of Kawasaki hydraulic pumps appears gray-black, while domestic hydraulic pumps are mostly silver-white due to differences in material, density, and heat treatment processes. Due to differences in material and density, Kawasaki hydraulic pumps are more than 10 pounds heavier than domestic hydraulic pumps.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.