What are the differences between Boyue and Boyue Pro?

What is the time limit for driver's license learning?

There is a 3-year time limit for driver's license learning. According to relevant regulations of the vehicle management office: 1. The validity period refers to the expiration of the driving learning certificate after 3 years, which becomes invalid after expiration. 2. If the license is not obtained within the 3-year validity period after passing Subject 1, it will be considered expired, and the information cannot be restored after expiration. The precautions for driver's license learning are as follows: 1. Avoid being opportunistic: Never be opportunistic when learning to drive, and strive for perfection in daily practice. 2. Avoid repeating the same mistakes: Under the guidance of the coach, once you realize a problem, remember it carefully to avoid repeating the same mistake next time. 3. Drive carefully: Whether practicing or driving on the road in the future, always prioritize safety.

3

4

Share

What is the emission standard of BYD Qin Pro?

2019 March manufactured BYD Qin belongs to China V standard, while China VI standard was implemented in July 2019. Below is the relevant introduction of BYD Qin Pro: 1. Introduction: BYD Qin Pro was officially launched on September 20, 2018. The new car adopts BYD's DragonFace design language and is equipped with an open platform to enable vehicle connectivity. The new BYD Qin Pro offers three versions: fuel version, DM dual-mode plug-in hybrid version, and EV pure electric version. 2. Model overview: BYD Qin Pro is equipped with "BYD D++ Open Ecosystem", using DiLink intelligent connectivity system as the platform, consisting of four parts: Di platform, Di cloud, Di ecosystem and Di open, comprehensively connecting people-vehicle-society-life.

2

4

Share

Why is there no sound when playing songs after successful Bluetooth connection in Cruze?

In this case, re-pairing is required. The reason is that an abnormality occurred during the pairing process, which is not considered a fault issue. Before re-pairing, you need to turn off and then restart your phone, and also turn off and restart the vehicle's multimedia system to resolve this issue. Relevant information about in-car Bluetooth is as follows: 1. Function: After successful Bluetooth pairing, you can use your phone to play audio files or answer calls, which is very convenient. While driving, it ensures driving safety. Once the car's system and Bluetooth are connected, you can make calls directly through the car's system in hands-free mode. 2. Automatic connection: Once your phone and car system are connected, they will automatically connect the next time you use them, provided that your phone's Bluetooth is turned on. This eliminates the need for frequent manual connections, saving time and adding convenience to vehicle use. However, when using Bluetooth calls, privacy should be taken into consideration.

16

4

Share

What brand is the engine of Hanteng Motors?

The engine of Hanteng Motors is produced by Jiangxi Tenle Power, so it belongs to domestic engines. Different models of Hanteng Motors have different engine models. The engine model of Hanteng X5 is TLE4G15D, with a maximum horsepower of 156, a maximum power of 115KW, a maximum power speed of 5600rpm, and a maximum torque of 215N.m. The engine model of Hanteng X7 new energy is TN4G18T, with a maximum horsepower of 170, a maximum power of 125KW, a maximum power speed of 2000-5800rpm, and a maximum torque of 245N.m. The engine of Hanteng Motors can be maintained daily by the following methods: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected according to the additional devices of the intake and exhaust system and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, and the selection standard should not be lower than the requirements specified by the manufacturer. Change the oil and filter regularly. The oil quality of any grade of lubricating oil will change during use. After a certain mileage, the performance will deteriorate, causing various problems for the engine. To avoid failures, the oil should be changed regularly according to the usage conditions, and the oil volume should be moderate. When the oil passes through the fine holes of the filter, the solid particles and sticky substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element will burst or the safety valve will open, allowing the oil to pass through the bypass valve and bring dirt back to the lubrication part, accelerating engine wear and increasing internal pollution. Clean the crankcase regularly. During engine operation, high-pressure unburned gas, acid, water, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston ring and the cylinder wall, mixing with metal powder generated by part wear to form sludge. When the amount is small, it is suspended in the oil; when the amount is large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear. Use a radiator cleaner to clean the radiator regularly. Removing rust and scale can not only ensure the normal operation of the engine but also extend the overall life of the radiator and the engine.

3

0

Share

Are Trailers Allowed on Highways?

On highways, towing is permitted for rescue vehicles but not for general vehicles. Below is relevant knowledge about highway driving: 1. Highway Driving Precautions: When driving on highways, it is essential to adhere to speed limits. The speed should not fall below the minimum limit nor exceed the maximum limit. Maintain a sufficient safe distance from the vehicle ahead, increasing this distance as speed increases. 2. Use of Lights on Highways: If driving at night on highways, high beams can be used because highways have median barriers that prevent high beams from affecting oncoming drivers' visibility. However, if following another vehicle closely, it is advisable to switch to low beams.

19

2

Share

How to Connect Bluetooth in Chery Sedan?

Chery sedan Bluetooth connection method: 1. Turn on the Bluetooth function of both the mobile phone and the car Bluetooth device, and set the mobile phone Bluetooth to "Visible to All" or "Open Detection" in the settings; 2. Search for Bluetooth devices on the mobile phone, select the found device for pairing connection, the pairing password is: 0000, after completing the pairing, the connection is successful. After the car Bluetooth and mobile phone Bluetooth are successfully paired and connected, you can make and receive calls and listen to music on the car Bluetooth. Chery Automobile Co., Ltd. is a state-controlled enterprise engaged in automobile production, and the company's products cover passenger cars, commercial vehicles, mini vehicles and other fields.

7

4

Share

What are the differences between Boyue and Boyue Pro?

What is the time limit for driver's license learning?

What is the emission standard of BYD Qin Pro?

Why is there no sound when playing songs after successful Bluetooth connection in Cruze?

What brand is the engine of Hanteng Motors?

Are Trailers Allowed on Highways?

How to Connect Bluetooth in Chery Sedan?

Which Model is the Entry-Level Mercedes-Benz?

Is 'off' on or off? Is 'on' on or off?

What does car exhaust resonance feel like?

What is the purpose of alternating between high and low beams?