What are the differences between BMW X3 25i and 28i?

1 Answers
DiAllie
07/29/25 11:03am
The main differences between BMW X3 25i and 28i lie in their powertrain. The BMW X3 25i has a maximum power of 184ps and maximum torque of 290Nm, while the 28i offers 224ps maximum power and 310Nm maximum torque. Detailed specifications are as follows: 1. Powertrain: In terms of performance, the X3 25i accelerates from 0-100km/h in 8.9 seconds, while the 28i is one second faster with a 0-100km/h time of 7.6 seconds. Actually, both the 25i and 28i versions of X3 have excellent product capabilities. 2. Exterior: Both models come with Sport and Luxury trim options, featuring attractive designs and rich configurations. Standard equipment includes cruise control, auto hold, hill descent control and other features.
Was this review help?
8
2
Share
More Forum Discussions

Should the coolant in the Hongguang S be replaced directly or just topped up when low?

If the coolant in the Hongguang S is low, it can be topped up, but it is important not to mix coolants from different manufacturers. Since different brands of coolant have different formulations, mixing them can cause chemical reactions. Typically, coolant has an effective service life of two years. If it expires or appears dirty, it should be replaced. How to determine if the coolant is low: Check the coolant warning light on the dashboard. If it lights up, it is likely due to low coolant, though it could also be caused by excessively high engine temperature. Inspect the coolant reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and add coolant promptly. Check the water level markings on the coolant overflow tank. The coolant level should normally be between the maximum and minimum marks. To determine if coolant is low, observe the markings. If the coolant is below the minimum level, it indicates a shortage. Coolant replacement interval: For vehicles that operate for long periods, such as taxis, high-quality coolant should generally be replaced once a year. For vehicles with shorter operating times, replacement can be done every two years or every 30,000 kilometers. To prevent excessive foam formation, which can reduce the heat exchange efficiency between the coolant and engine components, ensure the product is within its validity period when adding it. Long-life coolant can remain effective for up to three years. If suspended particles, sediment, or signs of deterioration or discoloration are observed in the coolant, replace it immediately and clean the system.
19
5
Share

How to Choose Between URV and Guan Dao?

Choosing the Honda Guan Dao is a better option. The reasons for selecting Guan Dao are as follows: 1. The Honda Guan Dao has enjoyed high popularity since its launch, with notable advantages in fuel efficiency and durability. 2. The Honda Guan Dao offers good space, strong power, fuel efficiency, and excellent comfort. Below is extended information on URV and Guan Dao: 1. In terms of exterior design: The Honda Guan Dao features a more stable and grand appearance with a distinct sense of layering in the front face design. The headlights adopt an open-eye design with a sharp shape, and the grille is decorated with thick and three-dimensional chrome strips. The lower air intake adopts a polygonal design. The overall design of the Honda UR-V feels slightly bulky. In terms of body dimensions, the Honda Guan Dao measures 4816 mm in length, 1942 mm in width, 1669 mm in height, with a wheelbase of 2820 mm; the Honda UR-V measures 4825 mm in length, 1942 mm in width, 1670 mm in height, with a wheelbase of 2820 mm. 2. In terms of configuration: Guan Dao offers high cost-effectiveness with features such as a panoramic sunroof, front fog lights, rearview camera, and leather seats. The steering is very flexible and light, the chassis is stable and solid, with good off-road capability. It is fuel-efficient and provides excellent comfort. In terms of power, both cars' base models are equipped with a 1.5T turbocharged engine paired with a CVT continuously variable transmission; the high-end models use a 2.0T turbocharged engine paired with a 9-speed automatic transmission. Both cars share the same configurations in terms of maximum engine power, maximum torque, and maximum horsepower.
10
1
Share

Can the clutch and accelerator be pressed simultaneously in a manual transmission?

The accelerator and clutch should not be pressed at the same time. Negative effects of simultaneously pressing the accelerator and clutch: If both the accelerator pedal and clutch pedal are pressed simultaneously, the connection between the engine and transmission will be disconnected. At this time, the engine has no load, causing the engine speed to rise rapidly, which is harmful to the engine. Relationship between clutch and accelerator in manual transmission: The accelerator controls engine speed: the more you press the accelerator, the higher the engine speed. Gear selection controls vehicle speed and torque: under the same accelerator position, higher gears result in higher vehicle speed but lower torque, suitable for driving conditions with low resistance (highway, flat roads). Lower gears provide lower vehicle speed but higher torque, suitable for driving conditions with high resistance (off-road, climbing). The clutch connects or disconnects power between the engine and transmission during vehicle starting and gear shifting, facilitating control during these operations.
4
5
Share

What is the appropriate speed for driving on mountain roads?

Mountain road speed limits are determined based on actual driving conditions. Reasons: If there are clearly marked speed limits, you must adhere to the specified speed standards. If there are no explicit speed limits, you should drive at a safe speed. Precautions: When encountering oncoming traffic on mountain roads, you must alternate between high and low beams. When road conditions are good, you can accelerate appropriately. Ascending and descending slopes vary in steepness, and you must never force an overtaking maneuver in curves with poor visibility. Use high and low beams flexibly when driving at night, flash your high beams to alert oncoming vehicles in sharp curves, and switch to low beams as a courtesy when encountering oncoming traffic to ensure safety. When going uphill, use a lower gear. Secondly, slow down when approaching curves and avoid overtaking. Thirdly, maintain control of your speed and keep a safe following distance.
5
2
Share

Where is the best place to put a fire extinguisher in a car?

It is best to place the fire extinguisher in the right-hand armrest box of the car, to the left of the driver's seat, or in the door storage compartment. Below is a partial introduction to the placement of fire extinguishers: 1. Location: The fire extinguisher should be placed on the right-hand armrest box of the driver, to the left of the driver's seat, or inside the car door storage compartment. 2. Usage: When a vehicle catches fire spontaneously, the onboard fire extinguisher should be used to extinguish the flames. If there is a burning smell or thick smoke coming from the car, it should be immediately recognized as a sign of spontaneous combustion. Pull the handbrake, turn off the power, quickly leave the burning vehicle, and use the fire extinguisher to cool down and extinguish the fuel tank and burning parts to avoid an explosion.
19
0
Share

Will a broken oil pan affect the engine?

Yes, a broken oil pan will affect the engine as it can cause engine oil leakage. Therefore, once this situation is discovered, the engine should be shut off immediately, and assistance should be requested by phone while waiting for a tow truck on-site. The oil pan is the engine's lubricating oil storage device, typically located at the lower part of the engine. The following is an introduction to engine oil: 1. Definition and composition of engine oil: Engine oil is the lubricant used by the engine, composed of base oil and additives. 2. Requirements for engine oil: As a type of machinery, the engine has common requirements for lubricants similar to general machinery, such as appropriate viscosity, certain anti-oxidation, anti-wear, anti-corrosion, and viscosity-temperature properties. 3. Density and functions of engine oil: The density of engine oil is approximately 0.91×10³ (kg/m³), and it serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.