What are the differences between BMW 525 and 530?

1 Answers
SanAdaline
07/25/25 4:52am
BMW 525 and 530 have the following differences: 1. Different vehicle weight: The curb weight of BMW 525 is 1705 kg; the curb weight of 530 is 1710 kg. 2. Different maximum horsepower: BMW 525 has a maximum horsepower of 184 hp; 530 has a maximum horsepower of 252 hp. 3. Different maximum power: BMW 525 has a maximum power of 135 kW; 530 has a maximum power of 185 kW. 4. Different maximum torque: BMW 525 has a maximum torque of 290 Nm; 530 has a maximum torque of 350 Nm. 4. Different maximum torque speed: BMW 525 has a maximum torque speed of 1350 to 4250 rpm; 530 has a maximum torque speed of 1450 to 4800 rpm.
Was this review help?
4
4
Share
More Forum Discussions

What kind of water should be added when the car radiator runs out of water?

Automobile radiators should be filled with coolant, and the relevant explanations are as follows: 1. Composition of coolant: The main components of coolant are water, antifreeze, rust inhibitor, and foam inhibitor. 2. Additional notes: Antifreeze is used to prevent the car coolant from freezing and expanding, which could cause the engine cooling water passages to rupture. Different regions have varying requirements for the antifreeze properties of the coolant due to differences in temperature. Rust inhibitor is used to prevent the formation of rust. Foam inhibitor suppresses the formation of foam under the water pump impeller, as excessive foam can reduce the cooling efficiency of the coolant. Coolant cannot be replaced with water. In special circumstances where water must be added for replenishment, soft water should be used, as hard water can cause scale buildup.
2
0
Share

What Causes the Malfunction of Buick LaCrosse Center Console Buttons?

Buick LaCrosse center console button malfunctions are mostly caused by poor line contact. Additional information: 1. Troubleshooting: Check whether there is power in the live wire entering the ignition switch. If there is, the part before the ignition switch is normal. If there isn't, there is a fault before the ignition switch; Check whether each connector of the wire is loose, falling off, corroded, or poorly connected; Insert the key and turn it to the ignition position without moving it. Check whether there is power in the live wire of the starter motor magnetic pack. If there isn't, the ignition switch is faulty. If there is, continue to check whether the magnetic pack is faulty; Check whether the magnetic pack coil is open, whether the wire and connector are loose, corroded, or poorly connected, etc. 2. Solutions: Remove the conductive rubber circuit board behind the center console buttons for replacement; Seek professional technicians for repair.
4
2
Share

What are the reasons for the parking brake failure in the Buick LaCrosse?

Buick LaCrosse parking brake failure may be caused by the following reasons: 1. Brake function: The parking brake failure in the Buick LaCrosse may be due to parking brake failure, mainly because the gap between the friction plate and the brake drum is too large, there is oil on the friction plate and brake drum, or the friction plate is severely worn, rivets are exposed, and the surface is hardened, causing slippage. 2. Parking brake shaft: It may also be because the parking brake shaft is severely worn, the gap is too large, or the parking brake lever is adjusted too long. It is recommended to have it checked at a repair shop. 3. Parking system: It could also be due to a malfunction in the electronic parking system, which requires reading the fault code with a decoder at a repair shop and then repairing it.
3
0
Share

What is the role of the Driver Management Department?

Driver Management Department is primarily responsible for driver's license examinations, driver management, and related services. Below is a detailed introduction about motor vehicle driver's licenses: 1. Overview: The full name of a driver's license is a motor vehicle driver's license, also known as a 'driving license.' It is a legally required certification that motor vehicle drivers must apply for. Driving a motor vehicle requires certain driving skills, and individuals lacking these skills may cause traffic accidents if they drive recklessly. Driving without a license is prohibited. 2. Precautions: Permission to drive a vehicle is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formalized process that must be carried out by an authorized agency.
13
4
Share

Can you park in a yellow line parking space?

Yellow parking spaces cannot be used for random parking. Here are the specific reasons: 1. Definition of yellow parking spaces: Yellow parking spaces are exclusive parking spots, only allowing designated motor vehicles to park, and are not public parking spaces open to the general public. 2. Penalties: Parking in yellow line spaces can result in penalties. Some yellow parking spaces on the road are exclusive spots, while others only allow buses, taxis, fire trucks, and ambulances to park. There are very strict restrictions on vehicle types, with electronic surveillance cameras capturing violations at different times and traffic police issuing tickets on-site. 3. Parking precautions: When parking, choose white free parking spaces or white paid parking spaces, and park according to the arrow indicators in the parking spaces. Pay attention to the specific usage times of parking spaces to avoid illegal violations.
7
2
Share

What Are the Reasons for Frozen Air Conditioning Pipes and No Airflow in Cars?

Here are the reasons for frozen air conditioning pipes and no airflow in cars: 1. Clogged Filter: When the air conditioning operates, outside air passes through the air conditioning filter before entering the car, trapping many airborne particles, which can easily clog the filter. A clogged air conditioning filter results in no airflow, leading to freezing of the air conditioning system. 2. Blower Motor Failure: A damaged blower motor can cause the air conditioning to stop blowing air. Overheating of internal coils or capacitor failure can lead to blower motor malfunction. If a fault occurs, it is necessary to promptly visit a 4S shop or repair facility for inspection and repair. 3. Control System Malfunction: For example, an expansion valve failure. An excessively open expansion valve can cause the evaporator temperature to drop too low, resulting in ice blockage and causing the air conditioning to freeze and stop blowing air.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.