What are the differences between Audi A7 and RS7?

How fast can a 60V 600W motor go?

A 60V 800W motor has a maximum speed of 40 km/h, which is a speed limit set by the manufacturer to ensure battery life. Generally, electric vehicles with 60V 800W motors are limited to speeds between 35 km/h and 40 km/h, while 72V electric vehicles are limited to speeds below 40 km/h. Removing the voltage limit of the regulator: If you want to go faster, you can remove the voltage limit of the regulator and increase the current to raise the motor's speed. After removing the speed limit, the maximum speed can reach around 50 km/h. Factors affecting the motor: For example, temperature, road conditions, and load can all affect the range of an electric vehicle, but generally, the difference is not particularly significant. Finally, there are a few points to remind users: developing good usage habits can help extend the service life of the electric vehicle. For instance, reasonably controlling the charging time—usually around 8 hours—helps protect the battery from damage.

20

1

Share

How to Switch and Use Four-Wheel Drive?

There are two methods to switch four-wheel drive: 1. The first method is to use the gear lever to switch between the vehicle's two-wheel drive system and four-wheel drive system, as well as between high-speed four-wheel drive and low-speed four-wheel drive. 2. The second method is to use a rotary knob to switch, which means changing the vehicle's terrain mode, whether it is high-speed four-wheel drive, low-speed four-wheel drive, or two-wheel drive system. Relevant information about four-wheel drive is as follows: 1. Four-wheel drive means that the motor vehicle maintains all four wheels driving during operation, with the engine's output torque distributed at a fixed ratio to the front and rear wheels of the vehicle. 2. This driving mode ensures that the vehicle always has good off-road capability and handling. The downside is that it cannot adjust torque distribution according to road conditions, and fuel consumption is relatively higher.

10

4

Share

Can a 60V 20Ah Battery Be Upgraded to 32Ah?

If the battery installation space is suitable, a 60V 20Ah electric vehicle can completely accommodate a 60V 32Ah battery. After replacing the battery pack, there is no need to change any other equipment or components, including the controller and charger, and the vehicle's driving range will be significantly extended. However, the charging time should be appropriately extended; otherwise, the battery cannot be fully charged. The methods for replacing an electric vehicle battery are as follows: Partial Replacement: When replacing the battery, the new battery must be completely consistent with the original battery in terms of category, specifications, and model. Except for the voltage, the capacity, power, and charging standard must match the original battery. Additionally, the original battery pack should be in the early stage of its lifespan, at least not in the later stage. Complete Replacement: For a complete battery replacement with a change in battery category, it involves the characteristics of the controller and charger, which must be consistent with the battery's features, such as charging rate, charge termination, and discharge termination requirements.

19

5

Share

Is it okay to mix 5w30 and 5w40?

Different grades of engine oil have varying performance characteristics. For performance-oriented vehicles, 5w30 and 5w40 should not be mixed. For less demanding vehicles, mixing a small amount may not cause issues, but they should not be mixed in equal proportions, used long-term, or substituted directly. If a 5w40-specified engine is filled with 5w30, it may lead to oil burning. Therefore, avoid mixing unless in emergencies, as it could potentially harm the engine. Difference between 5w30 and 5w40: 5w30 and 5w40 indicate the viscosity of the oil, which is suitable for both winter and summer use. The 'W' stands for 'Winter.' The number before 'W' represents the low-temperature viscosity—the smaller the number, the lower the low-temperature viscosity and the better the low-temperature fluidity, making it suitable for colder climates. The number after 'W' represents the oil's viscosity at 100°C—the larger the number, the higher the viscosity and the better the high-temperature protection. Recommended engine oil for different car models: Different manufacturers have varying technical requirements for engines and thus different viscosity requirements for engine oil. Japanese and Korean models typically recommend oils with viscosity grades of 20 or 30, such as SAE 0W-20 or 5W-30. American models generally recommend oils with a viscosity grade of 30, such as SAE 5W-30. European models usually recommend oils with a viscosity grade of 40, such as SAE 5W-40. If unsure, car owners can refer directly to the recommended oil type in their vehicle's maintenance manual.

14

5

Share

How to Use a Car Roof Rack?

A common method is to install a roof box on the car roof via the roof rack. However, before installing the roof box, you need to mount crossbars on the roof rails. The installation process for integrated roof rails and separate roof rails is quite similar—both use screws to secure the brackets, and the bracket positions are highly flexible, though the bracket structures may differ in shape. Once installed, the rack is ready for use. Below are precautions for using a roof rack: 1. Regularly check the tightness of the screws; ensure cargo is securely fastened or fixed on the rack and evenly distributed. Avoid sudden braking whenever possible. Do not exceed the rack's designed load capacity. 2. Consider factors such as product safety, maximum load capacity, compatibility, wind resistance and noise, appearance and design selection, long-term usage needs, and cost calculations.

9

2

Share

What Causes Vibration When Lightly Braking but Not When Braking Hard?

Possible reasons for vibration when lightly braking but not when braking hard are as follows: 1. Uneven brake disc surface with excessive radial runout. During braking, the brake pads intermittently contact the uneven disc, causing fluctuating braking force and resulting in body vibration, which is typically noticeable during light braking. 2. Significant deviation in wheel alignment data, especially incorrect front wheel alignment angles or excessive toe-in. This condition makes the vehicle harder to control during acceleration, with minor vibrations that simply feel awkward to drive. 3. Tire pressure that is either too high or too low. Excessively high tire pressure causes more pronounced body vibration at higher speeds, while low tire pressure leads to a floating sensation and drifting. 4. Abnormal tire wear. Misaligned wheels or deformed rims cause uneven tire surface wear, leading to body vibration during driving.

12

4

Share

What are the differences between Audi A7 and RS7?

How fast can a 60V 600W motor go?

How to Switch and Use Four-Wheel Drive?

Can a 60V 20Ah Battery Be Upgraded to 32Ah?

Is it okay to mix 5w30 and 5w40?

How to Use a Car Roof Rack?

What Causes Vibration When Lightly Braking but Not When Braking Hard?

Can 4S shops repair tires?

Can 4.2-meter Blue License Plate Vehicles Still Operate?

Is the film provided by the 4S shop for the whole car?

Can You Parallel Park on a 4-Meter-Wide Road?