What are the differences between Aston Martin DBS and DB11?

What are the new regulations for upgrading from a C3 to a C1 driver's license?

The new regulations for upgrading from a C3 to a C1 driver's license are: If you already hold a motor vehicle driver's license and apply to add an additional permitted vehicle type, the C3 driver's license must have been held for more than one year. Additionally, there should be no record of accumulating 12 penalty points in the current scoring cycle or the most recent scoring cycle before the application. You must fill out an application form and submit the application. Conditions required for upgrading from C3 to C1: The C3 driver's license must have been held for more than one year, meaning you must be out of the probationary period before applying for the upgrade. If you already hold a motor vehicle driver's license and apply to add an additional permitted vehicle type, there should be no record of accumulating 12 penalty points in the current scoring cycle or the most recent scoring cycle before the application. For applying to add a medium-sized passenger vehicle, you must have held a driver's license for city buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, or three-wheeled vehicles for more than three years, with no record of accumulating 12 penalty points in the three most recent consecutive scoring cycles before the application. When applying to add an additional permitted vehicle type, you must fill out an application form and submit a physical condition certificate along with your current motor vehicle driver's license. Applications to add an additional permitted vehicle type must be submitted at the place where the current driver's license was issued. Important notes: After adding an additional permitted vehicle type and obtaining a new driver's license, the validity period of the license will not be recalculated. The scoring cycle will always start from the original license's initial issuance date. Note that during the probationary period after the upgrade, if there is a record of accumulating 12 penalty points, the probationary permitted vehicle type driving qualification will be revoked.

1

0

Share

Will the engine warning light on the Geely Boyue turn off by itself?

If the engine warning light is on, you can follow these steps to handle it: First, check whether the engine is running normally, whether there are problems such as shaking, black smoke, or difficulty starting. If there are, try not to start the engine again. Especially note that if the red light is on, do not start the engine again. If the engine is running normally and the car can be driven, please go to a service station as soon as possible to find out the cause. The service station can easily read the fault code by connecting a portable diagnostic device, obtain fault information, and carry out targeted repairs. If the engine is running normally, the owner can also try gently plugging in various wiring harness connectors, as it may be caused by a loose connection somewhere, or repeatedly turning the key to the ON position to see if the light can be turned off. Generally speaking, the reasons for the engine warning light to turn on mainly include the following seven: Sensor failure: The sensors mentioned here include water temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or the signal is interrupted, the car's ECU cannot accurately obtain engine data, and the engine warning light will turn on. Fuel quality issues: If fuel and engine oil are not added according to the manufacturer's requirements, it may cause engine wear and trigger the warning light. Poor combustion of the air-fuel mixture: Poor combustion of the air-fuel mixture can lead to engine carbon deposits or knocking. When the oxygen sensor detects this and reports it to the ECU, the warning light will turn on as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all cause poor combustion of the engine's air-fuel mixture. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also cause the engine warning light to turn on. The most common issue is turbocharger damage, accompanied by symptoms such as oil leakage, high oil consumption, reduced power, metal noise, and blue or black smoke from the exhaust pipe. Intake issues: If there is a problem with the car's intake, it may cause the engine pipeline to become blocked, and in severe cases, the engine warning light will turn on. If the air filter is not clean and not regularly cleaned, it can lead to intake problems. Exhaust issues: Exhaust faults can also cause the engine warning light to turn on. The rear oxygen sensor, three-way catalytic converter, exhaust camshaft, and bearing faults are all causes of exhaust problems, with the three-way catalytic converter being the most common. Using leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the three-way catalytic converter, and fuel supply system failures can easily cause three-way catalytic converter faults. Anti-theft system failure: If the car's electronic anti-theft system malfunctions, or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can also cause the engine to fail to work properly, and the engine warning light will turn on.

9

3

Share

Is Car Seat Heating Practical?

Car seat heating is relatively practical. There are three reasons why car seat heating is practical: 1. Definition: Seat heating refers to the electric heating device inside the seat; 2. Material: This function is generally found in vehicles with leather seats. Since the surface material of leather seats tends to be cold in winter, the seat heating function can effectively solve this problem. Most electric heating devices also come with adjustable temperature settings; 3. Function: The heating wires inside the seat warm the seat and transfer heat to the occupant through thermal conduction. Therefore, the seat heating function is particularly useful in northern regions, as it alleviates discomfort caused by the seat being too cold after prolonged parking in winter.

1

4

Share

What Transmission Fluid Should Be Used for an AT Transmission?

Replacement must be done with the specific AT transmission fluid designated for the vehicle. The widely used ATFs in the market are DEXRON, DEXRON-II, and Type III. Below is an introduction to AT transmissions: Introduction: An automatic transmission is a device that can shift gears automatically based on engine RPM, as opposed to a manual transmission. Classification: Based on different working principles, there are currently four common types of automatic transmissions in vehicles: Hydraulic Automatic Transmission (AT), Continuously Variable Transmission (CVT), Automated Manual Transmission (AMT), and Dual Clutch Transmission (DCT).

10

2

Share

Will there be a fine for not wearing seat belts in the back seat of a car?

Whether there will be a fine for not wearing seat belts in the back seat of a car varies according to the regulations of each city. Currently, most cities do not impose fines for not wearing seat belts in the back seat. Relevant information about car seat belts is as follows: 1. Introduction: Car seat belts are safety devices installed on vehicle seats. 2. Working principle: The retractor contains a ratchet mechanism. Normally, passengers can pull the webbing freely and evenly on the seat, but when the webbing stops being pulled out continuously from the retractor or when the vehicle encounters an emergency, the ratchet mechanism will lock and automatically secure the webbing, preventing it from being pulled out.

4

Share

Can the OnStar Bluetooth Key Fob Open Car Doors?

OnStar Bluetooth key fob can remotely control and open car doors. Here is more information about OnStar: 1. Introduction: OnStar is the abbreviation of OnStar Information Service Co., Ltd., a joint venture established by General Motors, SAIC Group, and Shanghai General Motors on October 28, 2009. 2. Milestone: One of OnStar's parent companies, OnStar-LLC in the United States, is a wholly-owned subsidiary of General Motors and a world-leading provider of in-vehicle safety, security, and communication services. Currently, this system is installed in multiple models produced by General Motors. In terms of vehicle safety and information services, OnStar primarily uses wireless technology and Global Positioning System (GPS) satellites to provide comprehensive wireless services for automobiles.

20

1

Share

What are the differences between Aston Martin DBS and DB11?

What are the new regulations for upgrading from a C3 to a C1 driver's license?

Will the engine warning light on the Geely Boyue turn off by itself?

Is Car Seat Heating Practical?

What Transmission Fluid Should Be Used for an AT Transmission?

Will there be a fine for not wearing seat belts in the back seat of a car?

Can the OnStar Bluetooth Key Fob Open Car Doors?

What is the difference between Volkswagen CC 330 and 380?

What Causes Abnormal Noises from the Car Steering Wheel?

Can Points Be Cleared on the Day of the Driving License Demerit Reset Date?

What is the penalty for being caught by traffic police for applying a color-changing film?