What are the differences between a regular remote key and a smart remote key?

What Causes Severe Steering Wheel Shaking When Driving at High Speeds?

The reasons for severe steering wheel shaking when driving at high speeds are as follows: 1. Issues with the car tires. Uneven mass distribution across different parts of the tire can cause dynamic imbalance when the wheels rotate at high speeds, leading to severe steering wheel shaking while driving. In such cases, a four-wheel alignment and dynamic balancing of the tires are required, and severe cases may even necessitate tire replacement. 2. Apart from tire-related issues, other possible causes include faulty shock absorbers, frame deformation, excessive clearance in the meshing of the main and driven gears of the final drive, etc. 3. Additionally, excessive or frequent braking can cause the brake discs and brake pads to overheat and deform upon cooling, resulting in steering wheel shaking. Generally, replacing the brake discs and brake pads can resolve this issue.

2

Share

Will Running a Red Light at a Temporary Traffic Signal Be Captured?

It will be captured. According to Article 10 of the Road Traffic Safety Law, drivers who violate traffic signals will be given a warning or fined 200 yuan, with 6 demerit points deducted. Temporary license plates are paper permits allowing vehicles to drive temporarily on roads. Traffic violation penalties are unrelated to temporary or permanent license plates and are primarily imposed for illegal driving behavior. To determine a red-light violation, at least three pieces of photographic evidence are required: the vehicle has not left the stop line when the red light is on; the vehicle has passed the intersection when the red light is on; the vehicle has crossed the line and continued to move forward when the red light is on. Article 26 of the Road Traffic Safety Law: Traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light serves as a warning. Article 44: Motor vehicles passing through intersections must comply with traffic signals, signs, markings, or the directions of traffic police. Ways to avoid running a red light: When there is an arrow signal, follow the arrow light; otherwise, follow the circular light. When the red light is on, the front of the vehicle must not cross the stop line. When the yellow light is on, the front of the vehicle must not cross the stop line. When the green light just flashes, if you are close and moving fast, you should proceed, as braking might not stop you in time to avoid crossing the stop line; if you are far away, moving slowly, or the intersection is congested, you should stop. When driving in the city, develop the habit of looking for traffic lights whenever you see a crosswalk or stop line at an intersection.

8

3

Share

What is the normal tire pressure for front wheels?

The normal tire pressure for front wheels of ordinary cars is between 2.0-2.3, but the specific value should be based on the recommendation in the vehicle's manual. Here are detailed explanations about tire pressure: 1. Tire pressure is an important factor affecting tire service life and fuel economy. Improper tire pressure selection can cause power circulation, leading to increased tire wear and reduced service life. Considering the impact on vehicle performance, appropriate tire pressure must be selected to extend tire life and improve fuel efficiency. 2. Different road surfaces require different tire pressures. On good road surfaces, try to maintain standard tire pressure; when driving on soft surfaces, it's better to use lower pressure, otherwise it may easily cause tire spinning in place.

4

0

Share

What Causes Incomplete Clutch Disc Disengagement?

Clutch disengagement is incomplete primarily due to the following reasons: 1. Excessive free travel of the clutch pedal reduces the forward movement of the release bearing pushing the release lever, consequently shortening the rearward movement of the pressure plate, leading to incomplete clutch disengagement. 2. In a dual-disc clutch, if the adjustment screw is set too close to the intermediate drive plate, it limits the rearward movement of the intermediate drive plate, preventing complete separation from the front friction disc. Conversely, if the adjustment screw is set too far from the intermediate drive plate, excessive rearward movement of the intermediate drive plate causes it to collide with the rear friction disc, also resulting in incomplete clutch disengagement.

1

0

Share

Is Chassis Armor Useful?

Installing chassis armor on a car can prevent the chassis from rusting. Here are the specific details about chassis armor: 1. Chassis armor is a high-tech adhesive rubber asphalt coating. It is non-toxic, has high coverage, and strong adhesion. 2. Chassis armor can be sprayed on exposed parts of the vehicle such as the chassis, wheel hubs, fuel tank, lower body panels, and trunk. After drying quickly, it forms a tough elastic protective layer that prevents impacts from flying stones and gravel, and avoids erosion from moisture, acid rain, and salt on the metal parts of the chassis, preventing rust and corrosion, thereby ensuring the safety of the vehicle owner.

18

0

Share

What are the effects of a car being parked for half a year?

Parking a car for half a year can have the following effects: 1. Tire deformation. When a car is parked for a long time, the tires will gradually lose air, and the part of the tire between the rim and the ground will be compressed for an extended period, leading to deformation and damage. 2. Battery depletion. Some systems in the car continue to operate while parked, requiring power from the battery. When the battery is not recharged, the power will be drained, and over time, the car may not start. Additionally, prolonged power loss can damage the battery. 3. Gasoline evaporation. The car's fuel tank is designed with ventilation pipes to maintain air pressure. When the vehicle is parked for a long time, gasoline can evaporate through these ventilation pipes. 4. Increased corrosion of brake discs, chassis, and other components. Without proper maintenance during long-term parking, exposed metal parts are more susceptible to corrosion.

17

3

Share

What are the differences between a regular remote key and a smart remote key?

What Causes Severe Steering Wheel Shaking When Driving at High Speeds?

Will Running a Red Light at a Temporary Traffic Signal Be Captured?

What is the normal tire pressure for front wheels?

What Causes Incomplete Clutch Disc Disengagement?

Is Chassis Armor Useful?

What are the effects of a car being parked for half a year?

Why is the car heater not producing heat?

Can Out-of-Town Vehicles Enter Beijing's Second Ring Road?

What does LT on tires represent?

How to Choose Between Sylphy and Bora?