What are the differences between 1.6L and 1.8L engine displacements?

What is the original battery model for the Peugeot 508?

The original battery model for the Peugeot 508 is 12V70A. The functions of the battery are: 1. When the generator is overloaded, it can assist the generator in supplying power to the electrical equipment; 2. When the generator is not generating electricity or the voltage is low, it supplies power to the electrical equipment; 3. It can convert a portion of the electrical energy into chemical energy for storage. The Peugeot 508 is a mid-size car with body dimensions of: length 4870mm, width 1855mm, height 1455mm, wheelbase 2848mm, and a trunk capacity of 513L. It is equipped with a 1.6T turbocharged engine, with a maximum power of 125kW and a maximum power speed of 5500rpm.

3

5

Share

What is the windshield defogger button?

The windshield defogger is a fan-shaped button that activates the defogging function when pressed. Other methods for defogging car windows include: 1. Adjust the car's air conditioning vents to direct airflow toward the windshield and turn on the heater; 2. Apply a specialized defogging spray to the windshield and wipe it clean with a dry towel; 3. Open the windows to allow air circulation, equalizing the temperature inside and outside the car. The reasons for windshield fogging are: 1. High humidity—when the window temperature falls below the dew point in conditions of certain air humidity, condensation forms; 2. Low temperature—when there is a temperature difference between the two sides of the window, the cooler surface reaches moisture saturation, and the vapor pressure becomes lower than the surrounding environment, causing water vapor to accumulate on the glass surface and form tiny droplets of fog.

7

0

Share

How Often Should the Three-Way Catalytic Converter Be Cleaned?

The three-way catalytic converter should be cleaned approximately every 20,000 to 30,000 kilometers. Its function is to convert harmful gases such as carbon monoxide, hydrocarbons, and nitrogen oxides in vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. It is an essential external purification device installed in the vehicle's exhaust system. The method for cleaning the three-way catalytic converter is as follows: 1. Use a lift to raise the vehicle to the normal working height; 2. Remove the three-way catalytic converter from the vehicle; 3. Prepare oxalic acid using specialized maintenance equipment; 4. Soak the three-way catalytic converter in the prepared oxalic acid solution; 5. Rinse off any remaining oxalic acid solution and impurities with clean water.

1

3

Share

What are the cylinder arrangement forms of the cylinder block?

The cylinder arrangement forms of the cylinder block include: 1. L-type in-line: All cylinders are arranged at the same angle in a single plane, and only one cylinder head is used; 2. V-type arrangement: All cylinders are divided into two groups, with adjacent cylinders arranged at a certain angle to form a plane with an angle between the two groups; 3. W-type arrangement: Consists of two small V-shapes forming a large V-shape, with two groups of V-type engines sharing a single crankshaft; 4. H-type arrangement: Refers to a cylinder angle of 180 degrees; 5. VR arrangement: Refers to an engine with a 15-degree angle. The cylinder block is the main body of the engine, connecting the cylinders and the crankcase into one unit, serving as the supporting framework for installing pistons, crankshafts, and other components and accessories.

16

0

Share

How Long Can a Car Key Last After the Low Battery Warning?

Car keys can last for about 3 hours after the low battery warning. The method to replace the car key battery is as follows: 1. Press the round button on the side of the key to remove the mechanical key; 2. Insert a tool into the gap at the top of the key and pry open the back cover; 3. Push the battery to one side to remove and replace it. Car keys utilize the wireless remote control function of the central locking system, allowing you to remotely unlock and lock the doors without inserting the key into the lock. The method to start the car when the key battery is dead is: 1. Press the button on the side of the remote key to remove the mechanical key; 2. Insert the key into the door handle of the driver's side and open the door; 3. Place the car key near the lower right corner of the steering wheel and press the start button.

10

0

Share

When to Use High Beams?

Conditions for using high beams include: 1. Roads without street lighting or with poor illumination; 2. When overtaking other vehicles; 3. When navigating corners or curves; 4. Driving in conditions of low visibility such as fog, rain, snow, dust, or hail; 5. When needing to read road signs. The method to activate high beams is to push the light control lever outward. Their purpose is to enhance visibility and expand the field of observation. Car lights and their functions can be categorized as: 1. Headlights: Illuminate the road and objects ahead to ensure driving safety; 2. Width indicators: Show the vehicle's width to alert oncoming and following vehicles; 3. Fog lights: Make the vehicle more noticeable to oncoming and following traffic; 4. Turn signals: Alert surrounding vehicles and pedestrians.

17

5

Share

What are the differences between 1.6L and 1.8L engine displacements?

What is the original battery model for the Peugeot 508?

What is the windshield defogger button?

How Often Should the Three-Way Catalytic Converter Be Cleaned?

What are the cylinder arrangement forms of the cylinder block?

How Long Can a Car Key Last After the Low Battery Warning?

When to Use High Beams?

What Causes Uneven Folding Speed of Rearview Mirrors?

How Long Does It Usually Take to Pick Up an Audi After Ordering?

What Are the Gears of an Automatic Transmission Car?

Does a car from July 2012 require an annual inspection in 2021?