What are the differences between 1.6L and 1.8L engine displacements?

How to Operate a Wheel Alignment Machine?

The operation steps of a wheel alignment machine are as follows: 1. Park the vehicle on a level surface, check if the tire pressure on both sides is the same, and adjust if necessary; 2. Install the sensors, turn the steering wheel left and right as instructed by the computer, and check the data of the front and rear axles; 3. Install the brake lock and fix the steering wheel; 4. Lift the vehicle and adjust the toe-in, caster, and camber angles of the front axle, and check and adjust the toe-in of the rear axle; 5. Tighten the bolts and conduct a test drive. Alignment requirements: 1. Drive the vehicle onto the four-post lift and park it steadily, ensuring the vehicle's center aligns with the lift and turntable center. 2. Check and, if necessary, modify the vehicle specifications. 3. Strictly follow the steps displayed by the alignment machine without omission. For example, perform wheel runout compensation and tire inspection as required. The relevant tire inspection content should be input into the instrument as specified.

13

0

Share

Where is the cabin air filter located in the old Sonata model?

The cabin air filter in the old Beijing Hyundai Sonata is located behind the glove compartment on the passenger side. Below are the steps to replace the cabin air filter in the old Sonata model: 1. Open the glove compartment on the passenger side and press the button at the top to remove the glove compartment. 2. After removing the glove compartment, you will see the cabin air filter. Use a screwdriver to pry open the clips of the cabin air filter and then remove it. 3. After removing the old cabin air filter, install the new one with the white side facing down and the black side facing up. 4. Once the new cabin air filter is installed, reattach the glove compartment in the reverse order of removal. Below are the functions of the cabin air filter: 1. Ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. Separates solid impurities such as dust, pollen, and abrasive particles from the air. 3. Adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, providing strong and long-lasting moisture adsorption. 4. Prevents the car windows from fogging up, ensuring clear visibility for the driver and passengers and safe driving.

12

1

Share

How many days can the annual inspection be overdue?

Annual vehicle inspections cannot be overdue - they can only be conducted in advance, not delayed. Driving with an expired inspection is illegal. According to relevant regulations, vehicle owners may apply for an inspection compliance mark at the local vehicle management office up to three months before the expiration of the current inspection period. Before applying, the owner must resolve all traffic violations and accident records associated with the vehicle. During application, the owner must complete an application form and submit the vehicle license, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or exemption proof, and vehicle safety technical inspection compliance certificate. The vehicle management office should verify submitted documents within one working day and issue the inspection compliance mark upon approval.

4

0

Share

How to turn off the auto start-stop function in RAV4?

RAV4 auto start-stop deactivation method: Simply press the button to turn off the auto start-stop. The auto start-stop button is located to the left of the cigarette lighter, featuring an icon of a circle with the letter A inside and the letters OFF below. The auto start-stop is enabled by default and activates every time the vehicle is restarted. This means the function cannot be permanently disabled; you need to press the button each time you start the vehicle to deactivate it. The RAV4 is a compact SUV under Toyota, with dimensions of 4600mm in length, 1855mm in width, 1680mm in height, and a wheelbase of 2690mm. In terms of configuration, this vehicle comes standard with VSC vehicle stability control system, 6 airbags, TRC traction control system, HAC hill-start assist control, and automatic limited-slip differential.

13

2

Share

What is the method to reset the maintenance light on the Nissan Sylphy?

The method to reset the maintenance light on the Nissan Sylphy is: You can connect a diagnostic computer to perform the reset. If you want to do it yourself, press the toggle button on the left side of the steering wheel, locate the oil and filter selection in the maintenance settings, adjust the number on the right side to 5000 kilometers, and then the maintenance light will be reset. The Sylphy is a model launched by Dongfeng Nissan Passenger Vehicle Company, with body dimensions of 4641mm in length, 1815mm in width, and 1447mm in height, and a wheelbase of 2712mm. The Sylphy adopts the brand's new VMotion 2.0 design language, benefiting from Nissan's global CMF platform's longer and wider chassis structure, achieving an ultra-low drag coefficient of 0.26Cd.

17

0

Share

What does it mean when the airbag light is on?

The airbag light will illuminate during the engine self-check and turn off after the self-check is completed, which is a normal phenomenon. If it remains on continuously, it indicates a malfunction, such as an airbag fault, clock spring fault, crash sensor fault, loose airbag connector, or circuit breakage. It is necessary to promptly use a diagnostic tool to read the fault code, locate the fault point based on the code, and resolve the issue. The airbag system, also known as the Supplemental Restraint System (SRS), mainly consists of two parts: the seat belt pretensioner mechanism and the airbag itself. It is primarily composed of crash sensors, the airbag indicator light, the airbag control module, and the airbag. The various connectors (plugs) that serve as links between these critical components are equally important. Some connectors are specifically designed with a double-locking mechanism to ensure a more reliable connection. Additionally, to distinguish them from other connectors, all airbag system connectors are yellow.

2

5

Share

What are the differences between 1.6L and 1.8L engine displacements?

How to Operate a Wheel Alignment Machine?

Where is the cabin air filter located in the old Sonata model?

How many days can the annual inspection be overdue?

How to turn off the auto start-stop function in RAV4?

What is the method to reset the maintenance light on the Nissan Sylphy?

What does it mean when the airbag light is on?

What happens if you press the clutch and accelerator simultaneously in a car?

How to Use a Manual-Automatic Transmission?

How to Eliminate the Power Steering Malfunction in Malibu?

Does Honda Earth Dreams Include Hybrid Systems?