···
Log in / Register

What are the devices to prevent cars from being flooded?

4 Answers
MacJosiah
09/04/25 7:48am
There are no absolute devices to prevent cars from being flooded. Precautions after a car is flooded: 1. Avoid starting the engine in water: When a vehicle is flooded in a stalled state, the engine cylinders are closed, making it difficult for water to enter the engine. However, if the engine is started, water can enter the engine, leading to serious complications. In the worst-case scenario, the engine may need to be replaced or even scrapped. The best solution is to wait for the water level to recede and then call for a flatbed truck to tow the vehicle to a repair station. 2. Thorough cleaning: After the flooded car arrives at the repair station, the seats, transmission cover, carpets, etc., must all be removed for cleaning, disinfection, and dehumidification. For electric seats, the adjustment motor may also need to be replaced.
Was this review help?
7
0
Share
LaCourtney
09/16/25 8:36am
To prevent my car from flooding, my favorite method is installing a snorkel at the front grille to raise the air intake height, minimizing engine water ingress. I also apply waterproof sealant along door gaps and hood edges to prevent minor leaks. A professional waterproof cover is used to envelop the entire vehicle—just drape it over during heavy rains. Additionally, I place ramp blocks under the wheels to temporarily elevate the car and avoid water intrusion. Regular maintenance checks, like testing seals before monsoon season, are crucial. Cultivating smart driving habits, such as detouring around deep water, saves money and ensures peace of mind. Always measure carefully before purchasing a snorkel to avoid wrong models—this little tool becomes invaluable during flood seasons.
Was this review help?
13
4
Share
Expand All
SiennaLee
10/31/25 2:23am
I believe regular maintenance is crucial. Among flood prevention equipment, door seal strips are the most practical - replace them when they age to block water flow. While snorkel installation is slightly complex, it's reliable; I recommend opting for branded products. Use a jack to lift the car before floods to protect undercarriage components. Keep a waterproof cover in the car for sudden rain protection - it's simple moisture prevention. From my experience, flood-prone areas require pre-planned parking spots, avoiding low-lying areas. Combining equipment with prevention is effective, saving money without causing delays. Driving technique also matters - cross water slowly to minimize waves.
Was this review help?
6
2
Share
Expand All
JaxsonAnn
12/14/25 2:29am
I now prioritize using a snorkel to protect the intake system and waterproof wiring harnesses to cover sensitive electronic components to prevent short circuits. The APP flood warning provides additional alerts, and when combined with these devices, the installation is quick and effective. Slope pads elevate the vehicle's undercarriage for convenience and practicality, along with habitual checks of door seals. Keeping absorbent bags in the car for emergencies and overall protection reduces the risk of water damage, making it more reassuring to drive while avoiding flooded areas.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

How often should the Honda Fit transmission fluid be changed?

According to the Honda Fit owner's manual, the transmission fluid should be changed every two years or every 40,000 kilometers. Transmission fluid is an essential lubricant that maintains the cleanliness of the transmission system, ensuring smooth operation and prolonging the lifespan of the transmission components. Prolonged high-speed operation can lead to gear wear and generate metal particles and other contaminants. Failure to change the fluid promptly may result in abnormal gear wear, increased noise, and even severe transmission failure or complete breakdown. Below are key considerations for automatic transmission fluid changes: 1. It is crucial to use the manufacturer-recommended transmission fluid specific to your vehicle model. Only genuine transmission fluid meets the required specifications. Using other brands, inferior-quality, or counterfeit transmission fluids can cause abnormal wear and lead to serious transmission damage over time. 2. Have the transmission fluid changed at a professional transmission service center to avoid indirect transmission issues caused by unprofessional or improper procedures.
5
1
Share

How to reset the yellow engine malfunction light?

Methods to reset the yellow engine malfunction light: 1. The vehicle malfunction light is usually caused by the fuel emission system. When the malfunction light is on, start and turn off the vehicle three times, then observe whether the malfunction light is still on. If it remains lit, promptly check the fault codes at a repair shop; 2. Perform a power reset on the vehicle by disconnecting the battery for a few seconds and then reconnecting it. In some cases, the malfunction light will turn off. There are many electronic systems and sensors around the engine, and the engine's normal operation depends on these sensors and electronic systems. If certain sensors near the engine malfunction, it will affect the engine's normal operation. When sensors around the engine fail, fault codes are generated in the computer. Technicians can read these fault codes by connecting to the OBD interface.
11
5
Share

Does the Golf have a naturally aspirated engine?

The Golf does offer models equipped with naturally aspirated engines. Specifically, there is a Golf variant powered by a 1.6-liter naturally aspirated engine. Below are the detailed specifications: 1. This 1.6-liter naturally aspirated engine in the Golf delivers 110 horsepower and a maximum torque of 155 Nm. The engine reaches its peak power at 5,800 rpm and its maximum torque at 3,800 rpm. It features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. 2. The engine is paired with either a 5-speed manual transmission or a 6-speed automatic transmission (6AT). The 6AT transmission is known for its reliability and durability, and it provides relatively smooth gear shifts.
6
5
Share

What does hybrid engine mean?

Plug-in hybrid electric vehicles (PHEVs) can be externally charged and operate in pure electric mode. After the battery is depleted, they switch to hybrid mode (primarily powered by an internal combustion engine) while simultaneously recharging the battery. Series plug-in hybrid: Also known as range-extended electric vehicles, in this configuration, the engine does not directly drive the vehicle. Instead, the engine first drives a generator to produce electricity, which then powers the electric motor to drive the vehicle. This results in a longer energy transfer chain and relatively lower overall efficiency. Representative models include the BMW i3 with range extender. Parallel plug-in hybrid: In this type, both the engine and the electric motor can drive the vehicle. It offers multiple power transmission modes, better dynamic performance, and a simpler structure. This widely adopted configuration represents the mainstream technical approach. Representative models include the BYD Tang DM.
17
5
Share

How often should the brake fluid be replaced in an Audi Q5?

Brake fluid replacement interval: 1. The recommended replacement cycle for brake fluid is every 2 years or when the vehicle reaches 40,000 kilometers. 2. Another suggestion is to replace the brake fluid every 60,000 kilometers if driving in tropical regions. Reasons for replacement and precautions: 1. Brake fluid tends to deteriorate over time, becoming cloudy with a lowered boiling point and reduced effectiveness. 2. After prolonged use, the brake pump may experience varying degrees of wear, making it advisable to replace the brake fluid. 3. Timely replacement of brake fluid is crucial for driving safety and should not be overlooked. Therefore, the decision to replace brake fluid should be based on actual conditions. 4. Low-quality brake fluid contains more impurities, which can accelerate wear on the brake pump and cause blockages in the brake system. Expired brake fluid also provides less effective braking performance, though drivers may not notice due to long-term adaptation to their vehicles.
1
0
Share

Is there a difference between the two cigarette lighter sockets in a car?

In fact, both sockets are directly connected to the battery and have a voltage of 12V, but there are some differences in the sockets. For example, a cigarette lighter can heat its heating wire when plugged into the cigarette lighter socket, but it won't work when plugged into a 12V power socket. However, a dashcam plug can draw power from either the 12V power socket or the cigarette lighter socket. So, there is a slight difference in the socket types. Additionally, another difference is that the 12V power socket stops supplying power after the engine is turned off. But the cigarette lighter in some car models remains powered continuously. For instance, many Ford models are designed this way, such as the Focus, Fiesta, Kuga, Edge, etc., as well as older models like the Buick GL8.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.