···
Log in / Register

What are the details and techniques for the B2 Subject 3 driving test?

5 Answers
XavierDella
07/29/2025, 08:25 AM

Here are the relevant details and techniques for the B2 Subject 3 test: Starting: Before starting, check if the doors are fully closed, adjust the seat and mirrors, fasten the seatbelt, check the parking brake and gear, then start the engine. Check the dashboard, observe the interior and exterior mirrors, turn your head to observe the traffic behind, turn on the turn signal, shift gears, release the parking brake, and start moving. The starting process should be smooth, without jerking, rolling backward, or stalling. Changing lanes: Before changing lanes, correctly turn on the turn signal, observe the traffic behind through the interior and exterior mirrors, and change lanes only when it is safe to do so. After completing the lane change, turn off the turn signal. When changing lanes, judge the safe distance of the vehicle, control the driving speed, and do not hinder the normal driving of other vehicles.

Was this review help?
20
3
Share
MacEverly
08/13/2025, 07:31 PM

When I was learning to drive, I found Subject 3 the most challenging. The test details include adjusting the seat and mirrors after getting in the car, checking the dashboard lights before starting, signaling in advance and observing the rearview mirror to ensure a safe distance when changing lanes, slowing down and yielding priority when turning at intersections, and maintaining a distance within 30 cm without crossing the line when parking. In terms of skills, it's essential to practice the actual route more, familiarize yourself with the examiner's common testing points for lane changes and light operations, stay calm and avoid nervousness, control the speed between 20-30 km/h, and simulate practice with friends. Pay attention to not making mistakes with the light switches, especially keeping the low beams on during night tests, avoiding sudden braking or acceleration can significantly reduce error rates, and getting enough sleep before the test is crucial.

Was this review help?
5
1
Share
Expand All
DiMaci
10/08/2025, 11:41 PM

As an experienced driver, I share detailed tips for the driving test (Part 3): Starting movements must be standardized, including releasing the handbrake and gently pressing the accelerator simultaneously; when changing lanes, the turn signal must be activated at least 3 seconds in advance, and confirm the gap in the mirror before moving the steering wheel; slow down and observe left and right when passing intersections, yield to pedestrians or points will be deducted; when pulling over, first turn on the right signal, slow down, align parallel to the edge line, and stop steadily. The key technique is to practice driving for 20 minutes daily to reinforce muscle memory, familiarize yourself with the characteristics of the test route such as turning points and slopes, keep a relaxed mindset, regulate breathing, and don't stress over minor issues to pass smoothly.

Was this review help?
14
5
Share
Expand All
LillianaRose
11/21/2025, 11:56 PM

Let me share some detailed tips for the driving test (Subject 3) from a safety perspective: Always check your rearview mirrors frequently, especially before turning. Start slowly without sudden acceleration. When changing lanes, make sure there's space in your blind spot before moving. Approach intersections by slowing down in advance and carefully checking left and right to ensure safety before proceeding. When parking by the roadside, align with the edge line without exceeding 30 centimeters. Keep lighting operations simple, like using low beams at night without overcomplicating. During practice, repeatedly simulate scenarios with your instructor, and maintaining a calm mindset is most important.

Was this review help?
5
5
Share
Expand All
CarterLee
01/12/2026, 01:32 AM

The details of the Subject 3 driving test can be summarized in a few concise points: Walk around the car for inspection before getting in, start smoothly without rolling back, signal early when changing lanes and check mirrors for safe distance, slow down and look both ways at intersections, and park steadily aligning with the lines. For skills, practice the test route a week in advance, record and review your mistakes for correction, stay calm during the test by taking a sip of water and deep breathing while maintaining a steady speed around 20km/h, memorize the light operation mnemonics such as turning left by signaling left and holding the steering wheel steady to avoid wobbling.

Was this review help?
9
4
Share
Expand All
More Forum Discussions

What Causes the Engine Warning Light to Illuminate in the Encore?

Sensor malfunctions, car maintenance issues, fuel quality problems, poor combustion of the air-fuel mixture, engine intake issues, turbocharging problems, exhaust system faults, and anti-theft system malfunctions are the main reasons for the engine warning light to illuminate in this vehicle. Additionally, during vehicle startup, the car performs a self-check on the engine system. Normally, the engine warning light should turn off after the self-check is completed. If it remains on for an extended period, promptly visit a repair station to seek professional assistance for inspection and to eliminate potential safety hazards. Below is a detailed explanation of each type of fault: Sensor Issues: Sensors include coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruptions, the car's ECU cannot accurately obtain engine data, which triggers the engine warning light. In such cases, promptly visit a repair center for professional inspection to eliminate safety hazards. Maintenance Issues: Poor engine maintenance is the most common cause of the engine warning light illuminating. Vehicles have specific maintenance cycles. If maintenance is not performed on schedule, coupled with poor driving habits, the engine's operational burden increases, eventually causing the engine warning light to illuminate as a reminder of a fault. Fuel Quality Issues: This refers to both fuel and engine oil. The fuel used in cars typically has a specific octane rating, while engine oil can be semi-synthetic or fully synthetic. Manufacturers usually recommend the type of fuel and engine oil to use. If the owner fails to follow these recommendations, long-term use can lead to engine wear, triggering the warning light. Always use the recommended fuel octane rating and appropriate engine oil. Poor Combustion of the Air-Fuel Mixture: Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can cause poor combustion of the air-fuel mixture in the engine. This leads to engine carbon buildup or knocking, which the oxygen sensor detects and reports to the ECU, triggering the warning light as a warning. Intake Issues: Engine combustion requires air intake, making the air filter crucial. If the air filter is dirty or not cleaned regularly, it can affect air intake, potentially leading to blockages over time. Severe cases can cause the engine warning light to illuminate. Turbocharging Issues: Problems with the intake boost piping or turbocharger can also trigger the engine warning light. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Exhaust Issues: Faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings can trigger the warning light. The most common issue is catalytic converter failure, caused by factors such as using leaded gasoline, lead or silicon-based oil additives, physical damage to the catalytic converter, or fuel system malfunctions. Anti-Theft System: If the car's electronic anti-theft system malfunctions or the anti-theft controller is incompatible with the engine's electronic controller, the anti-theft system can prevent the engine from operating normally, also triggering the warning light. Solutions for the Engine Warning Light Illumination: If the engine warning light is on and the car cannot start, this may be due to a faulty fuel pump or ignition components. It is recommended to call for assistance immediately. If the engine warning light is on but the car is drivable, yet exhibits severe shaking or loss of power, pull over safely and call for roadside assistance. If the engine warning light is on but there are no noticeable driving abnormalities, this may indicate a faulty sensor. In such cases, you can continue driving cautiously at low to moderate speeds but should visit a repair shop as soon as possible to address the issue.
4
3
Share

How to Replace the Battery in a Hyundai Tucson Key Fob?

To replace the battery in a Hyundai Tucson key fob, follow these steps: Remove the mechanical key, then insert the reverse side of the mechanical key into the slot. Turn it clockwise to pry open the back cover. Remove the old battery and replace it with a new one. The Tucson is an SUV with distinct contours and body lines that blend strength with softness, giving it a European car vibe. The short rear end creates a youthful and dynamic overall style. In terms of features, the Hyundai Tucson comes with upgraded front headlight level adjustment and projector headlights for improved illumination. Additional conveniences include keyhole illumination, a folding key, and a portable ashtray for enhanced driving and riding comfort.
20
4
Share

What is the reason for the cancellation of the Great Wall BMW Spotlight Automotive Project?

Great Wall BMW Spotlight Automotive Project has not been canceled. Here is the relevant introduction about Spotlight Automotive: 1. Introduction: Spotlight Automotive Co., Ltd. is a joint venture established by Great Wall Motor Co., Ltd. and BMW Holding Co., Ltd., with each party holding a 50% stake. 2. Company Plan: It will fully focus on the field of new energy vehicles, integrating and utilizing the technical, resource, and management advantages of both shareholders to develop a new generation of pure electric vehicles for the global market. 3. Platform Core: The core of this platform is the hybrid dual-axle drive technology, which can achieve complete decoupling of the front and rear axles. Based on traditional front-wheel drive technology, it adds hybrid technologies such as start-stop, motor boost, and engine power generation. Additionally, this platform also has high scalability, providing Great Wall with more possibilities to expand into the compact, mid-size, and large SUV segments. For example, the P8 model unveiled at last year's Guangzhou Auto Show is the first model built on the new energy technology platform Pi4.
19
0
Share

How to solve the ticking sound of EA888?

Solutions for EA888 ticking sound: 1. Normally, when the engine block temperature reaches about 95 degrees, the sound will return to normal; 2. Poor-quality engine oil or situations such as not changing the oil for a long time or lack of engine oil can easily increase friction between the valves and guides as well as hydraulic lifters, making various sounds in the engine louder. It is recommended to change the oil and add oil frequently; 3. If you are still not reassured after the above checks, it is recommended to go to a 4S shop or repair shop for inspection to confirm the cause of the fault. The EA888 engine is a newly designed engine by Volkswagen, integrating a series of advanced technologies such as direct injection, turbocharging, and variable valve timing, achieving a balance of power, economy, and environmental protection.
2
5
Share

What are the differences between the NIO ES6 and NIO ES8?

The differences between the NIO ES6 and NIO ES8 are: Different models: The NIO ES6 is a mid-size SUV; the NIO ES8 is a full-size SUV. Different dimensions: The NIO ES6 has a length of 4850mm, a width of 1965mm, a height of 1734mm, and a wheelbase of 2900mm; the NIO ES8 has a length of 5022mm, a width of 1962mm, a height of 1756mm, and a wheelbase of 3010mm. NIO is a global smart electric vehicle company, established in November 2014. NIO's main products include the NIO ES6, NIO ES8, NIO EC6, NIO EVE, and NIO EP9.
18
3
Share

What are the common issues with the r320 engine?

The common issues with the r320 engine include: 1. The engine produces a significant amount of carbon deposits. When gasoline is not fully absorbed into the engine, it forms carbon deposits, leading to incomplete combustion, which causes the car to shake and increases fuel consumption; 2. The oil quality does not match the engine. If the oil viscosity is too high, it can lead to increased fuel consumption and carbon deposit formation; 3. The throttle or fuel injector has not been cleaned for a long time, or the engine has a misfire. This affects the atomization and combustion of fuel, leading to a series of problems. The Mercedes-Benz r320 is equipped with a 3.0t twin-turbocharged V6 engine, with a maximum power of 200 kW and a maximum torque of 400 Nm. The maximum torque is achieved between 1300 and 4500 rpm, paired with a 7-speed automatic transmission, achieving a 0-100 km/h acceleration time of 7.8 seconds.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.