What are the current issues with the Lynk & Co 03?

1 Answers
LeCecilia
07/30/25 10:28am
The current issues with the Lynk & Co 03 include rust problems and infotainment system failures. Below is a detailed introduction to the current issues with the Lynk & Co 03: 1. Rust issues: Currently, rust problems on the Lynk & Co 03 are mainly concentrated in areas such as the steering column, center console, chassis, and exterior panels. Metal components have not experienced rust issues. 2. Infotainment system: The Lynk & Co 03's infotainment system occasionally experiences black screen or freezing issues, which can be considered the most common problem with the Lynk & Co 03. The likelihood of the system freezing increases significantly after the car has been exposed to direct sunlight. 3. Seats: The power seats sometimes function intermittently, and the seat memory feature occasionally fails. 4. In-car internet: The car's infotainment system sometimes loses internet connectivity and requires a restart to restore normal operation.
Was this review help?
13
3
Share
More Forum Discussions

What is the repair approach for multi-cylinder misfires?

Engine multi-cylinder misfires repair approach first involves checking high-voltage ignition faults, namely faults in the ignition circuit, mainly manifested as erosion, high-voltage breakdown, short circuits, open circuits, spark plug failure or incorrect model, increased resistance in cylinder wires, etc.; then eliminating faults in the computer control and execution circuits, primarily faults in the ignition primary and fuel injector control circuits; followed by checking whether the valves are eroded. Related introduction to engine misfires is as follows: severe engine shaking is a manifestation of engine misfires, multi-cylinder misfires in car engines are issues with the ignition system, the ignition system is not just about spark plugs, but also includes ignition coils and other wiring issues that need to be checked, as well as blockages caused by fuel injectors (blockages due to poor fuel quality), injectors not spraying fuel.
18
4
Share

What is the fuel consumption of Mercedes-Benz?

Here is the relevant introduction to the fuel consumption of Mercedes-Benz vehicles: 1. In terms of real-world fuel consumption, based on the fuel consumption statistics from car owners: The fuel consumption range of the Mercedes-Benz GLC 260 model is 9.12-11.71L/100km, with an average fuel consumption of 10.42L/100km; The fuel consumption range of the 300 model is 9.15L-11.70/100km, with an average fuel consumption of 10.41L/100km. 2. The official fuel consumption data released by the Ministry of Industry and Information Technology is tested on a test bench by simulating different driving conditions. It is usually lower than the actual fuel consumption. For car owners, since the official fuel consumption is tested under the same standard, it can serve as a reference for comparing fuel consumption when purchasing a new car.
19
0
Share

Why does the engine emission warning light come on?

During vehicle operation, the engine emission warning light may illuminate. Common causes for this phenomenon include: 1. Spark plugs: Due to prolonged use without replacement, excessive gap, carbon buildup, or internal damage. 2. Cylinder: A damaged ignition coil in one of the cylinders, causing that cylinder to malfunction. 3. Fuel pump: Internal short circuit in the fuel pump, preventing low-pressure fuel from reaching the required supply pressure, leading to engine shaking or stalling. 4. Intake system: Air leaks in the engine intake system, causing engine shaking. 5. Piston carbon buildup: Excessive carbon deposits on the throttle valve, valves, or piston top in cold engine conditions. 6. Valve seat: In one of the engine cylinders, poor valve seat sealing or carbon buildup jamming the piston ring, resulting in no cylinder pressure and causing engine shaking.
18
4
Share

What Other Compensations Are Available After the Other Party is Fully Liable for Repairing the Car?

Compensation should also be provided for vehicle damage, personal injuries, and damage to personal belongings, among other things. Below is relevant information about traffic accidents: Introduction to Traffic Accidents: Refers to incidents where vehicles cause personal injuries or property damage due to fault or accidents on the road. Traffic accidents can be caused not only by unspecified individuals violating road traffic safety regulations but also by irresistible natural disasters such as earthquakes, typhoons, mountain floods, and lightning strikes. Evaluation Indicators for Traffic Accidents: The traffic accident rate is an indicator used to assess the frequency of traffic accidents. There are three commonly used accident rates: population accident rate, vehicle accident rate, and operational accident rate.
15
2
Share

How long does it take for a multi-vehicle transfer application to be approved?

Normally, the application will be processed within three working days (excluding the day of submission) after system submission. The required time may vary in different regions. Vehicle owners can check the progress of the business processing through the online progress inquiry system using the online motor vehicle transfer business serial number. Generally, the subsequent transfer procedures can be completed at the local vehicle management office within ten working days. There are two ways to handle motor vehicle transfer online: Through "Traffic Management 12123": Enter the motor vehicle transfer application business, and after logging in, the owner can apply for the motor vehicle transfer business for their registered non-operating small and micro passenger cars. Through website application: Apply for transfer through the website of the Traffic Safety Comprehensive Service Management Platform of the provincial traffic control bureau.
8
0
Share

What is the reason for the flashing AC switch in the Reiz?

The flashing AC switch in the Reiz may be caused by the compressor protection device tripping. Below are the explanations and solutions: 1. Excessive refrigerant: Solution: Appropriately reduce the refrigerant amount. 2. Poor heat dissipation: Solution: Check the condenser pipe for dust and clean the condenser. 3. Blockage in the pipeline system: Solution: Refer to the pressure gauge to diagnose and resolve the issue, then reprocess the system. 4. Dust and dirt accumulation on the evaporator or filter, leading to reduced airflow and imbalance in system pressure and temperature. Solution: Clean the evaporator or filter. 5. Lack of refrigerant causes the compressor exhaust temperature to overheat, triggering the overload protection switch. Solution: Add refrigerant promptly.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.