What are the correct steps for starting on a slope and descending?

1 Answers
DeKaleb
07/30/25 6:08am
First, before starting on a slope, the previous step is a right-angle turn, which mainly involves going uphill, stopping, starting, and descending. For this test point, the key is to stop at the correct position, start without rolling back, and there are no specific requirements for descending. After completing the right-angle turn, proceed to the slope. Generally, releasing the clutch in first gear will allow you to ascend. Adjust the distance from the side line to 30cm and stop when the shoulder line is parallel. The front of the vehicle should be within the three lines. Stopping on the center line is full marks, within 50cm on the right side deducts 10 points, and within 30cm is full marks.
Was this review help?
4
4
Share
More Forum Discussions

Which car has an eagle on the front?

The car with an eagle on the front is a Rolls-Royce. Taking the Rolls-Royce Phantom as an example, its body dimensions are 5834mm in length, 1990mm in width, and 1632mm in height, with a wheelbase of 3570mm. It has a maximum power of 338kW and a maximum torque of 720Nm. The Phantom inherits the classic design of Rolls-Royce, featuring a long engine hood, short front overhang, and long rear overhang. The long wheelbase creates a spacious interior, while the vertical front grille and high-mounted headlights add an extraordinary temperament. Another characteristic of the Rolls-Royce Phantom is its roofline, which blends into the sturdy C-pillar at the rear, giving the vehicle a sense of solidity and poise.
13
4
Share

How many cylinders does the Buick Verano 15s engine have?

Buick Verano 15s is equipped with a three-cylinder engine, offering two powertrain combinations for responsive and smooth acceleration, paired with a high-performance sports chassis. The two powertrain combinations are: The 20T model is equipped with the eighth-generation Ecotec series 1.3T direct-injection turbocharged engine and a new CVT intelligent continuously variable transmission, with a maximum power of 121kw and a maximum torque of 240nm. The 15T model is equipped with the eighth-generation Ecotec series 1.0T direct-injection turbocharged engine and a 6-speed DSS intelligent transmission, with a maximum power of 92kw and a maximum torque of 180nm, delivering a more efficient and agile driving experience that redefines the perception of small-displacement engines for the new generation.
12
0
Share

How to set up automatic window roll-up when locking the Regal?

Methods to set up automatic window roll-up when locking the Regal: 1. Find the vehicle settings in the central display or instrument panel; 2. Enter the door and window settings, where you can find the option for automatic window roll-up and make the relevant settings. Generally, when the vehicle is locked, the automatic window closing feature is hidden in the smart remote key. For example, pressing and holding the lock button for more than 3 seconds will automatically close all windows; pressing and holding the unlock button will automatically lower all windows. The body dimensions of the Regal are 4843mm, 1856mm, and 1484mm, with a wheelbase of 2737mm. Its front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.
14
2
Share

How to Clean the Gap of Vehicle Glass?

Methods for cleaning the gap of vehicle glass: 1. Find a thin metal sheet of suitable size and wrap it with a dry cloth; 2. Insert the cloth-wrapped metal sheet into the gap of the car window, gently push it from front to back. When the cloth becomes dirty, use the clean side to wrap the metal sheet and repeat the process until no obvious dust is visible on the cloth. The dust in the gap of the car window is usually a place that cannot be cleaned during regular car washing. However, if the gap is filled with dust, the dust will stick to the window when the glass is raised or lowered, leaving unsightly marks. Be careful not to use excessive force when cleaning the dust in the glass gap to avoid damaging the sealing rubber strip.
16
1
Share

What is DSP in a car?

DSP in a car stands for Digital Signal Processor for audio. Due to the limited space in a car, the numerous speakers, their less-than-ideal distribution, the irregular shape of the car interior, strong glass reflections, and severe acoustic defects, coupled with the limitations of speaker frequency response, enclosure materials, and space, the sound reaching the human ear can be significantly distorted. By digitizing the audio signal and using digital technology to correct these defects—including adjustments like EQ, crossover, delay, and phase—it is possible to produce a high-quality sound with accurate sound imaging, strong spatial presence, high resolution, and a balanced frequency response across highs, mids, and lows, tailored to human hearing preferences.
16
5
Share

What does 532t mean?

Envision 532t refers to the 2021 Envision 5T model, which is a midsize SUV under the Buick brand. Below is an introduction to the Envision: 1. Exterior: The 2020 Buick Envision features a more rugged and bold appearance. The new wing-shaped chrome trim runs through the LED wing-shaped headlights, widening the horizontal visual effect. The dynamic front bumper design and three-dimensional silver lower guard create a full and powerful front end. The rear also adopts a three-dimensional wing-shaped design, with the chrome trim connected to the taillights, paired with integrated dual exhaust pipes, enhancing the sporty feel. 2. Powertrain: The 2020 Buick Envision offers a 2.0T SIDI direct-injection turbocharged engine paired with a 9-speed HYDRA-MATIC intelligent transmission, as well as a 1.5T SIDI direct-injection turbocharged engine paired with a 7-speed DCG PLUS intelligent dual-clutch transmission.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.