What Are the Correct Steps for Cleaning a Car Air Conditioner?

[OMariana]

The correct steps for cleaning a car air conditioner are: 1. Remove the air filter and blower of the vehicle to be cleaned (depending on the vehicle model, some may not require removing the blower); 2. Place a clean water basin under the air conditioner's drain outlet at the bottom of the car to collect dirty water; 3. Adjust the endoscope camera's bend at the designated folding position on the cleaning machine to an appropriate angle; 4. Insert the cleaning machine's endoscope camera and nozzle through the blower motor hole to clearly observe the location and contamination around the car's evaporator; 5. Load the degreaser onto the cleaning gun, connect the spray gun to the air pump, and hold the spray gun nozzle close to the upper part of the evaporator, evenly spraying the degreaser. Wait for about 1 minute until the stains foam, soften, and loosen; 6. After cleaning, first reinstall the blower and start the vehicle to dry the evaporator, then use a fogging antibacterial machine to sterilize the air conditioner ducts through fogging.