What are the contents of the Fuzhou Driver's License Renewal Guide upon Expiration?

What Causes Automatic Shutdown Due to Low Rail Pressure?

Introduction to the causes of automatic shutdown due to low rail pressure: Air leakage in the low-pressure fuel circuit: Damaged fuel pipe joints or improper installation. Blockage in the low-pressure fuel circuit leading to poor fuel supply: Such as clogged filters, blocked fuel pump inlet screens, or bent intake pipes. Leakage in the high-pressure fuel circuit causing excessively low rail pressure: Such as excessive injector return flow, nozzle seat leakage, rail pressure relief valve seat leakage, or fuel pump plunger wear and leakage. Fuel pump malfunction: Such as stuck metering units, gear pump failure, or stuck or constantly open overflow valves. Low fuel level in the tank: This can also trigger the fault, leading to automatic shutdown due to low rail pressure.

7

3

Share

Is It Normal for the Steering Wheel to Make a Whining Sound?

When turning the steering wheel while driving, a whining sound may occur due to friction between the spiral cable polyester film inside the steering wheel and the combination switch or the steering wheel itself. Prolonged wear could potentially lead to airbag malfunctions. Lack of Power Steering Fluid: This can cause insufficient lubrication of the power steering pump, resulting in unusual noises. Check if the power steering fluid level is adequate. If it's insufficient, inspect the steering system for potential leaks, such as leaks in the steering gear, hoses, power steering pump, or steering fluid reservoir. Steering Noise While Driving: The noise typically originates from the front suspension outside the vehicle. If it's a sharp squeaking sound, it might be due to excessive or insufficient front wheel toe-in, causing tire scrubbing when turning the wheels non-parallel.

19

4

Share

Is a Contract Required When Ordering a Car at an Auto Trade?

Ordering a car at an auto trade requires signing a contract. It is recommended to sign the contract before paying the deposit. The contract should clearly specify the deposit amount, payment deadline, intended car model, transaction price, delivery time, and dispute resolution methods before the actual deposit is paid to ensure the smooth progress of the contract. Relevant regulations: When the debtor fulfills the debt, the deposit shall be deducted from the payment or returned. If the party paying the deposit fails to fulfill the debt or the fulfillment does not meet the agreed terms, resulting in the failure to achieve the purpose of the contract, they have no right to request the return of the deposit. If the party receiving the deposit fails to fulfill the debt or the fulfillment does not meet the agreed terms, resulting in the failure to achieve the purpose of the contract, they shall return double the deposit. Precautions for picking up the car: First, check the production date of the vehicle. Then, mainly inspect the body paint, especially the four corners, all lights and onboard electronics, the cooling effect of the air conditioning, engine noise and vibration, the four tires, and whether the spare parts in the trunk are complete. The mileage on the dashboard should not exceed 30. Only when all these are qualified can the payment be made. It is necessary to obtain the vehicle purchase invoice, the compulsory insurance policy, and the commercial insurance policy of the vehicle.

9

4

Share

Is It Normal for Beginners to Frequently Scratch Their Cars?

It is normal for beginners to frequently scratch their cars. Reasons for Scratches: Scratches mainly occur due to inaccurate judgment of the car's dimensions, sensitivity of the throttle and brakes, insufficient observation of the surrounding environment, and operational errors. Precautions: Meeting another car on a wide road usually doesn't cause problems, but on narrow roads, scratches are more likely to happen. In such cases, drive slowly, ensure the position of the right wheels, and then pay attention to the meeting point on the left. If unsure, stop and let the other car pass. Problems often arise when making U-turns, so extra attention should be paid to the left side. Ensure there are no vehicles or pedestrians before turning. In tight spaces, if unsure about completing the U-turn in one go, it's best to turn the steering wheel multiple times.

19

1

Share

Can You Buy Cars in North Korea?

It is legal to buy cars in North Korea, which is a completely legitimate consumer demand. The number of cars in North Korea is only over 300,000, and owning a "private car" is considered a very prestigious thing. Before using a private car, it is necessary to check the engine oil level: Engine oil is an essential fluid for vehicle operation. During daily use, it is important to inspect the vehicle's fluids. The oil level can be checked using the dipstick. Park the vehicle on a level surface, remove the dipstick, and if the oil level is between the F and L marks, it indicates a normal oil level. If the level is below the minimum mark, it is necessary to add oil promptly. Before using a private car, it is necessary to check the coolant: The car coolant also needs to be inspected while driving. Qualified coolant can prevent freezing and overheating. When checking the engine coolant, avoid doing so when the engine is hot, as opening the radiator cap in a hot state may result in burns from splashing coolant or high-temperature steam. When adding or replacing coolant, ensure that different brands of coolant are not mixed to prevent sedimentation, which could affect the coolant's normal performance.

3

0

Share

What happens when salt enters the engine?

If salt enters the engine, it will accelerate engine wear and significantly reduce the engine's service life. If detected early, it is recommended to immediately replace the engine oil and oil filter. Accelerated wear and carbon buildup: It will accelerate engine wear and carbon buildup. If the vehicle is driven without an air filter, dust will directly enter the cylinders and mix with the fuel-air mixture for combustion. Under such conditions, cylinder wear will be eight times that of a vehicle with an air filter, piston wear three times, and piston ring wear nine times. Decreased filtration efficiency: If the air filter is not too dirty, it can be cleaned using compressed air. When blowing it out, pay attention to blowing from the inside to the outside. However, most air filters are made of coarse filtration and low-air-resistance materials. During driving, the filter creates resistance to airflow. When dust accumulation exceeds a certain level, the filter's resistance increases, leading to decreased filtration efficiency.

7

0

Share

What are the contents of the Fuzhou Driver's License Renewal Guide upon Expiration?

What Causes Automatic Shutdown Due to Low Rail Pressure?

Is It Normal for the Steering Wheel to Make a Whining Sound?

Is a Contract Required When Ordering a Car at an Auto Trade?

Is It Normal for Beginners to Frequently Scratch Their Cars?

Can You Buy Cars in North Korea?

What happens when salt enters the engine?

How to Check the Manufacturing Date of Truck Tires?

What does a red ignition warning light mean in a car?

Do Motorcycles Need to Be Scrapped?

Where is Goodyear produced?