What are the contents of the automatic transmission subject four exam?

1 Answers
VonBrantley
07/30/25 10:34am
The main contents include: safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of post-accident procedures. Subject four, also known as the subject four theory test or driver's theory test, is part of the motor vehicle driver's license assessment. After the implementation of the Ministry of Public Security's Order No. 123, the subject three exam was divided into two parts: in addition to the road test, a safety and common sense test was added, commonly referred to as "subject four." The exam consists of 50 questions, mainly in the form of case studies, pictures, and animations, with a full score of 100 and a passing score of 90. Subject four extracts the requirements for safe and civilized driving, safe driving skills under complex conditions, and emergency handling knowledge from the original subject one and places them after the "subject three" actual road driving test. If subject four is not passed, there is no need to retake the previously passed subjects (subject one, subject two, subject three). You can schedule a retest on your own, and no retest fee is required. However, the validity period of the driving skills test permit is three years. If the applicant does not complete the exam within the validity period, the scores of the already passed subjects will be invalidated.
Was this review help?
11
5
Share
More Forum Discussions

What engine is equipped in the Geely King Kong?

Geely King Kong is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 102ps, a maximum power of 75kw, and a maximum torque of 141nm, paired with a 5-speed manual and automatic transmission. The dimensions of the Geely King Kong are: length 4342mm, width 1692mm, height 1435mm, wheelbase 2502mm, minimum ground clearance 158mm, fuel tank capacity 45L, and curb weight 1103kg. The front suspension of the Geely King Kong is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. The Geely King Kong is equipped with 185/60R15 front tires and 185/60R15 rear tires.
11
0
Share

What Causes the Steering Wheel Noise in the New Santana?

New Santana steering wheel noise is caused by issues such as a faulty airbag clock spring, lack of oil in the shock absorber's plane bearing, loose stabilizer bar bushings, or dirty power steering fluid. The details are as follows: Faulty Airbag Clock Spring: If the noise comes from inside the steering wheel, it is mostly due to a dry airbag clock spring. Remove the steering wheel's airbag clock spring and apply some grease. Check if the noise persists. If it does, promptly replace the airbag clock spring, as it indicates damage. Lack of Oil in the Shock Absorber's Plane Bearing: When turning the steering wheel, if the noise comes from outside the vehicle, it is likely due to insufficient oil in the shock absorber's plane bearing. Open the hood and listen to see if the noise originates from the shock absorber's top mount. This will confirm if the noise is from the plane bearing. If it lacks oil, apply some grease. If the noise continues after greasing, replacement is necessary. Loose Stabilizer Bar Bushings: If the noise is not from the shock absorber's plane bearing, check if the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings can cause noise not only when turning the steering wheel but also when driving on uneven roads. Loose bushings can be fixed by adding shims, but damaged ones must be replaced. Dirty Power Steering Fluid: If the power steering fluid is too dirty, it increases the pressure in the power steering system, causing a buzzing noise from the power steering pump. Promptly replace the power steering fluid in such cases.
16
3
Share

What car has a logo featuring a cross with a snake beside it?

The logo featuring a cross with a snake beside it belongs to Alfa Romeo. Taking the 2020 Alfa Romeo Giulia as an example, its body dimensions are: length 4643mm, width 1860mm, height 1438mm, with a wheelbase of 2820mm and a fuel tank capacity of 58 liters. The 2020 Alfa Romeo Giulia features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 280PS, a maximum power of 206kW, and a maximum torque of 400Nm, paired with an 8-speed automatic transmission.
1
5
Share

How to Check the Production Date of a Seat Belt?

Seat belt production date can be checked by: pulling out the entire seat belt, where the label at the very bottom carries the production date. The function of a seat belt is: to restrain the driver and passengers in their seats during emergency braking in case of an accident, preventing them from being thrown forward and protecting them from secondary impact injuries. Precautions for using seat belts: 1. Before using the seat belt, check if any parts are aged, deteriorated, or damaged; 2. The lap belt should be fastened above the maximum hip circumference, close to the pelvic bones, keeping the waist tightly secured to prevent the body from sliding out of the belt or causing waist injuries.
4
3
Share

What does Dongfeng Honda Civic 220 mean?

Dongfeng Honda Civic 220 indicates that the engine has a maximum torque of 220Nm. Its body dimensions are: length 4517mm, width 1799mm, height 1434mm, with a wheelbase of 2700mm, minimum ground clearance of 104mm, fuel tank capacity of 47 liters, and a curb weight of 1343kg. The Dongfeng Honda Civic 220 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine producing a maximum horsepower of 177PS and a maximum power output of 130kW, paired with a continuously variable transmission (CVT).
17
3
Share

What is the tutorial for removing the rear bumper of the Sylphy?

Sylphy rear bumper removal tutorial is: 1. Remove the fixing screws on the mudguard; 2. Open the trunk and remove the fixing screws near the taillights; 3. Remove the clips along the edge of the bumper. The Sylphy has a body length, width, and height of 4631mm, 1760mm, and 1503mm respectively, with a wheelbase of 2700mm, a minimum ground clearance of 166mm, and a fuel tank capacity of 50L. The Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, producing a maximum horsepower of 122PS, a maximum power of 90kW, and a maximum torque of 155Nm, paired with a 5-speed manual/automatic transmission.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.