What are the contents of Subjects 1, 2, 3, and 4 in the driving test?

2 Answers
ReaganAnn
07/28/25 5:31pm
The contents of Subjects 1, 2, 3, and 4 in the driving test are as follows: 1. Subject 1: Mainly tests basic knowledge such as road traffic safety laws and regulations, traffic signals and their meanings, and traffic rules. With the new driving test regulations, Subject 1 is divided into 12 study hours, and students must complete all study hours before they can schedule the Subject 1 test. 2. Subject 2: Requires practical driving practice, with five mandatory test items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curved path. Some regions may have additional items. 3. Subject 3: Road test, usually practiced at a driving school. The instructor teaches students 16 essential skills required for the test, after which they can schedule the test. The main test items include starting, driving straight, shifting gears, changing lanes, pulling over, passing through intersections straight, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing through school zones, passing through bus stops, meeting other vehicles, overtaking, making U-turns, and driving at night—totaling 16 items. 4. Subject 4: Theoretical knowledge test, building on the basics of Subject 1, it assesses the driver's response methods in critical situations through more practical case studies and animations.
Was this review help?
7
4
Share
ColtonDella
08/11/25 11:43pm
When I first got my driver's license, I remember the first subject was the theoretical test, mainly memorizing traffic regulations and safety knowledge, answering multiple-choice questions on a computer. This part was quite boring, but I had to buckle down and memorize it well, otherwise failing would affect the subsequent steps. The second subject was the hardest for me—it tested driving skills in a controlled area, like parallel parking and stopping on a slope. I made a lot of mistakes when I first practiced, but thanks to the instructor's guidance, I eventually got the hang of it. The third subject was the road test, driving directly on the road with an examiner sitting beside me—super stressful! It focused on lane changes, turns, and safety awareness. The fourth subject was the safety and civility knowledge test, similar to the first but more focused on courteous behavior in real driving scenarios, like yielding to pedestrians or handling emergencies. The whole process must be taken step by step. My advice for beginners is to find a reliable instructor, don’t rush through the steps, and always prioritize safety!
Was this review help?
10
3
Share
Expand All
More Forum Discussions

How Many Years Should Tires Generally Be Used Before Replacement?

Automobile tires can generally be used for 3-5 years, with a recommended mileage not exceeding 60,000 kilometers. The service life of car tires is directly related to the driver's driving habits and the driving environment. During daily vehicle use, it is necessary to make reasonable judgments about the tires. If the tires are no longer usable, they should be replaced promptly. The following are indicators for tire replacement: 1. Sidewall bulging: If bulging appears on the sidewall of a car tire, it is necessary to replace the tire immediately. Sidewall bulging is difficult to repair and indicates that the tire's cords have broken. This can lead to a blowout at any time while driving, so timely replacement is essential to avoid compromising driving safety. 2. Tire cracks: Tire cracks are relatively common during daily vehicle use. These cracks can vary in length and depth, requiring careful assessment. If the condition of the tire cannot be determined, it is recommended that the owner visit a 4S shop or a professional auto repair shop for inspection. Severe tire cracks can lead to bulging and eventually cause a blowout. 3. Tire wear indicators: Car tires have wear indicators, which mark the limit of tire wear. If the tire wear reaches this indicator, the tire should be replaced immediately. Such tires pose significant safety hazards. Even on dry roads, the braking distance will increase, and on wet or slippery roads, they are prone to skidding or brake failure.
2
5
Share

Should Snow on the Car Be Cleaned?

Snow on the car should be cleaned. Accumulated snow on the car's surface not only affects the vehicle's appearance but also contains corrosive substances. If not dealt with promptly, it can corrode the car's paint, shortening its lifespan. Therefore, it is necessary to clean it in time to avoid affecting normal driving. Here are some related tips for dealing with snow on the car: 1. Do not forcibly activate the windshield wipers: When there is snow on the car's surface, avoid using the windshield wipers hastily. The wipers, covered in ice and snow, may freeze and stick to the windshield. Forcibly turning them on can damage the wiper motor or tear the rubber surface of the wipers, leading to unnecessary replacement costs. 2. Cleaning snow without an ice layer: For snow on the car's surface without an ice layer, the cleaning process is relatively simple. Use a soft cloth or a gentle tool to gently sweep the snow in one direction. Since the snow hasn't melted, it causes minimal damage to the car's paint. 3. Cleaning snow with an ice layer: During daily driving, snow on the car's surface usually comes with an ice layer. To clean this type of snow, first use a specialized car snow shovel to remove the snow.
9
1
Share

Why can't the compression ratio be increased too high?

Increasing the compression ratio too high can easily cause knocking. A high compression ratio is one of the factors that lead to knocking. For engines of the same displacement, a higher compression ratio results in better power and fuel economy. However, there are limits to everything. Simply increasing the compression ratio to pursue high performance while ensuring normal operation presents exponentially increasing difficulties. Below is an introduction to compression ratio: 1. The compression ratio is a parameter that can basically reflect the efficiency of an engine. For naturally aspirated engines, without considering other factors, an increase in the compression ratio means that the engine's performance and efficiency are also improved accordingly. 2. However, the compression ratio cannot be increased too high because it can cause knocking in gasoline engines. This phenomenon can severely affect the working life of gasoline engines, so it is often necessary to use higher-octane gasoline to reduce the likelihood of knocking.
19
0
Share

What to Do When the Rearview Mirror Has Water Droplets and Is Unclear on Rainy Days?

Here are the solutions for unclear rearview mirrors due to water droplets on rainy days: 1. Rain Guards + Rearview Mirror: Installing rain guards on the rearview mirror is a cost-effective solution. These guards are typically attached to the door window glass and work quite well. The installation process is very simple and can be completed in just a few minutes. However, their effectiveness is limited during heavy rain, though they perform well in light rain. 2. Soap Water, Detergent, or Shampoo + Rearview Mirror: Applying a layer of soap water on the rearview mirror works very effectively, keeping the mirror clear for 2-3 hours even in heavy rain. Shampoo and similar products yield similar results. 3. Water Repellent: Water repellents prevent water from adhering to the rearview mirror surface. There are two types of glass water repellents available on the market: those that are applied by wiping and those that are sprayed. Between the two, the wipe-on type provides more even coverage on the glass surface. When water repellent is applied to the glass, rainwater forms into small round droplets, which quickly roll off on an inclined glass surface.
1
5
Share

Do I need to drive my car for the fourth-year vehicle inspection?

You do not need to drive your car for the fourth-year vehicle inspection. Here are specific details about the inspection: 1. Period: There will be no penalty for being one day overdue. Vehicles overdue for inspection by less than one year can undergo a supplementary inspection at the vehicle management department without facing penalties. However, if the inspection is overdue by more than one year, a penalty of 3 points deduction may be imposed, and the vehicle could be temporarily impounded. 2. Penalties: Driving a motor vehicle on the road without displaying the inspection compliance label may result in the vehicle being impounded and a 1-point deduction. Failure to purchase compulsory traffic insurance will result in a fine of twice the insurance premium.
3
4
Share

How to Operate One-Button Start in a Manual Transmission Car?

Here is how to use the one-button start in a manual transmission car: 1. Open the car door and enter the vehicle, then adjust the seat and fasten the seatbelt; 2. Check if the gear is in neutral. If not, shift the gear back to neutral first; 3. Press the clutch pedal all the way down and press the one-button start. Here is some related information about manual transmission: 1. The gearshift lever must be manually moved to change the gear meshing device inside the transmission, thereby altering the gear ratio to achieve shifting. 2. The principle is that the power input shaft is connected to the clutch. The power transmitted from the clutch is directly passed to the gear set through the input shaft. The gear set consists of gears with different diameters, and different gear ratios result in completely different power transmission effects. The gear shifting during normal driving refers to changing the gear ratio.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.