What are the considerations when ordering a car?

How to Use Turn Signals in an Automatic Car?

In an automatic car, the turn signal can be activated by pushing the lever downward. Here are the relevant details: 1. Function of turn signals: Turn signals serve as a reminder to alert surrounding vehicles and pedestrians; activating the turn signal produces a flashing light, allowing nearby individuals to notice and yield in time, thus preventing accidents. 2. Automatic turn signal reset: The automatic reset feature of turn signals in automatic cars is a relatively simple comfort function. It reduces the driver's actions through a straightforward mechanical structure, thereby implicitly enhancing the safety of driving an automatic car and providing the driver with greater peace of mind.

2

3

Share

How to Change the Brake Fluid for Peugeot 307?

Steps to change the brake fluid for Peugeot 307: 1. Replace the brake caliper; 2. Loosen the bleeder valve, slowly press the brake pedal to the bottom, and repeat the operation every 2 to 3 seconds until the new brake fluid is discharged; 3. Repeat the operation for each wheel to complete the brake fluid replacement. The Peugeot 307 is equipped with an inline four-cylinder, double overhead camshaft (DOHC), 16-valve engine, with displacements of 1.6 and 2.0. The 1.6 engine has a maximum power of 78kw and a maximum torque of 142nm. The dimensions of the Peugeot 307 are 4212mm in length, 1762mm in width, and 1531mm in height.

4

2

Share

Can the vehicle pass the annual inspection if the position light is broken?

The vehicle cannot pass the annual inspection if the position light is broken. The annual inspection mainly checks the brake lights, reverse lights, headlights (high and low beams), and turn signals. The position light is primarily used to indicate the presence of the vehicle and its approximate width, making it easier for other vehicles to judge during overtaking and meeting. The brake light is installed at the rear of the vehicle and is red in color to enhance the penetration of the light source, ensuring that following vehicles can easily detect when the vehicle ahead is braking, even in low visibility conditions, thereby preventing rear-end collisions. The reverse light is also installed at the rear of the vehicle and is used to illuminate the road behind and warn vehicles and pedestrians that the vehicle is reversing; all reverse lights are white. The headlight, also known as the front light or LED daytime running light, is closely related to safe driving at night or in bad weather conditions. The turn signal is an important indicator light that is activated when the vehicle is turning to alert surrounding vehicles and pedestrians.

4

5

Share

What are the threads inside a tire called?

The threads inside a tire are called cord threads. Related introduction: 1. Viscose cord threads: Resistant to fatigue and heat, with good dimensional stability, but viscose cord threads have the disadvantage of being prone to moisture absorption, which reduces their strength after absorption. Mainly used in radial passenger car tires. 2. Polyamide cord threads: High strength, good impact and fatigue resistance, but poor dimensional stability and adhesion to rubber. When used, they must undergo dipping and thermal stretching treatment to improve their dimensional stability and adhesion. Widely used in tires for trucks, aircraft, as well as in belts and hoses. 3. Polyester cord threads: High strength, large initial modulus, good thermal shrinkage and dimensional stability, but they generate high heat during fatigue, are prone to amination and hydrolysis, which reduces their strength, and are difficult to bond with rubber. To improve adhesion, surface activation treatment and dipping are required. Widely used in passenger car tires. 4. Aramid cord threads: High strength and modulus, better high-temperature resistance and dimensional stability, but high cost and poor adhesion to rubber. Suitable for high-performance tires in luxury cars, military vehicles, aircraft, etc.

11

3

Share

What do the diamond-shaped dashed lines on the road indicate?

Diamond-shaped dashed blocks on the road are longitudinal deceleration markings for traffic lanes. These markings consist of a series of diamond-shaped dashed lines parallel to the lane dividing lines. They are typically installed at bridge approaches, turns, and other locations where speed reduction is necessary. Their primary purpose is to create a visual narrowing effect on the lane, inducing a sense of pressure that prompts drivers to automatically slow down at curves, slopes, or other areas requiring reduced speed. Regulations regarding deceleration and yielding: 1. Early deceleration: When approaching a section with deceleration markings, drivers should slow down in advance, stop to yield to pedestrians, or observe traffic conditions on the main road. Proceeding is only allowed after ensuring the safety and priority passage of vehicles on the main road. 2. Yielding to priority traffic: At intersections without traffic lights or police control but with traffic signs and markings, motorists must yield to vehicles or pedestrians with the right of way. Failure to decelerate and yield as indicated by these markings may result in the driver bearing primary responsibility in the event of a collision with vehicles on the main road.

11

4

Share

How to Find a Lost Mercedes-Benz Car Key?

Here is the relevant information on how to find a lost Mercedes-Benz car key: 1. Positioning function: It is rare to find a lost key unless it is lost at home or in the parking area, in which case the chances of finding it are slightly higher. Currently, car keys do not come with a built-in positioning function, unless it is a high-end model where some thought has been put into the car key. You can purchase a smart key anti-loss device online, which consists of a finder and a receiver and operates via Bluetooth signal transmission. 2. Replacing the lock cylinder: If the key is indeed lost, the first thing to consider is the spare key, and then see if there is a chance to recover the lost key. Additionally, it is important to promptly get a new key made, which will render the old key ineffective. However, this ineffectiveness refers to the inability to start the vehicle. Since the car door has a mechanical lock, the old key can still open the car door. Therefore, for safety reasons, replacing the entire car's lock cylinder is the safest option.

17

4

Share

What are the considerations when ordering a car?

How to Use Turn Signals in an Automatic Car?

How to Change the Brake Fluid for Peugeot 307?

Can the vehicle pass the annual inspection if the position light is broken?

What are the threads inside a tire called?

What do the diamond-shaped dashed lines on the road indicate?

How to Find a Lost Mercedes-Benz Car Key?

How to Replace the Battery in an Envision Car Key?

How long does it take to get a driver's license?

What is the maintenance method for the oxygen sensor?

Which Honda model uses an imported engine?