What Are the Consequences of Washing an Engine with a Water Gun?

1 Answers
EvaLynn
07/29/25 1:12pm
After washing the engine with a water gun, short circuits may occur. Dust in the engine compartment: If the engine compartment has not been cleaned for a long time and is covered with dust, it will affect the heat dissipation of the engine and related components. Poor heat dissipation can lead to excessively high temperatures in the engine compartment. On one hand, this affects the engine's performance and lifespan, and on the other hand, it accelerates the aging of internal components such as wiring harnesses, posing safety hazards. Tools needed for cleaning: Cleaning agent, brush (or an old toothbrush), towel, and spray bottle. It is well known that the main sources of pollution in a car's engine compartment are dust and mud. If car owners want to clean the engine compartment themselves, they can prepare engine cleaner, a brush (or an old toothbrush), a towel, and a spray bottle. These tools are generally sufficient.
Was this review help?
5
3
Share
More Forum Discussions

Is it necessary to get a driver's license?

It is necessary to obtain a driver's license. Below is the relevant introduction to driver's licenses: 1. Examination content: The test subjects include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving), totaling three items. Before each subject test, an appointment is required (special circumstances can be scheduled through the green channel for driving tests), and the test is taken after the appointment. 2. Types: A1 driver's license, A2 driver's license, A3 driver's license, B1 driver's license, B2 driver's license, C1 driver's license, C2 driver's license, C3 driver's license, C4 driver's license, C5 driver's license, D driver's license, E driver's license, F driver's license, M driver's license.
13
2
Share

Can ETC be used on another car?

ETC cannot be used if the vehicle information it is bound to does not match. Different vehicle models have different highway toll fees. According to the "Rules for the Use of Non-stop Fast Pass System," when applying for ETC, the ETC card and OBU device are already bound to the vehicle, and the relevant vehicle information has been imported, forming a one-to-one correspondence. If you switch to a new car with a new license plate, you need to cancel the original ETC and reapply for the new car. If it's a new car with the old license plate, you can simply update the vehicle information at an offline service center. ETC is a non-stop electronic toll collection system. ETC lanes are set up for vehicles equipped with ETC onboard devices, using electronic tolling. The electronic toll collection system is an automatic toll system for highways or bridges. ETC deduction principles: There will be one or more ETC lanes on highways. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, computer networking technology is used for backend settlement with banks, achieving the goal of vehicles not needing to stop at toll booths to pay tolls. All of this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line. Green and eco-friendly: Low-carbon, as vehicles pass toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution. Reduced wear and tear: Saves costs by reducing the frequency of vehicle starts and brakes, lowering wear and fuel consumption. Improved efficiency: Theoretically, ETC lanes can increase vehicle passing efficiency by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will significantly increase." It also set a target in the "13th Five-Year" comprehensive transportation development indicators: "By 2020, the ETC usage rate for road passenger vehicles should reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and increasing the ETC adoption rate for passenger vehicles, efforts will also be made to promote ETC usage for trucks and explore deep integration of the ETC system with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation development directions, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC usage. ETC usage precautions: The ETC transaction sensing range is 8 meters. If the vehicle in front stops, maintain a distance of more than 10 meters to prevent automatic sensing and paying for the vehicle in front, in case its ETC device is faulty or nonexistent. The recognition speed for ETC lanes is 20 km/h. If the speed is too fast, the vehicle's device information cannot be read, leading to failed deductions. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag falls off or becomes loose, will render the electronic tag invalid. It can be taken to the bank where the ETC card was issued or a highway service center for inspection. If the loosening or detachment is not due to human interference, reactivation is sufficient. When using a debit card bound to ETC, insufficient balance will also cause deduction failures. Follow the guidance of on-site staff to use manual MTC lanes and pay with cash or card. Thick car windshields may cause poor sensing. This is especially important for vehicles that have had their windshields replaced after accidents or for those who have modified their front windshields.
16
4
Share

How to Check the Tire Pressure Monitoring on the Buick Excelle?

The method to check the tire pressure monitoring on the Buick Excelle is: 1. Press the menu button to switch to the vehicle information menu; 2. Rotate the knob at the top of the left lever to the tire pressure monitoring information to see the tire pressure of all four wheels. The Buick Excelle is a compact 4-door, 5-seater sedan with body dimensions of 4609mm in length, 1798mm in width, and 1486mm in height, with a wheelbase of 2640mm and a fuel tank capacity of 44 liters. The Excelle is equipped with a 1.3T turbocharged engine and a 6-speed automatic manual transmission, delivering a maximum power of 120 kW and a maximum torque of 230 Nm. It features front-wheel drive, with a front suspension using a MacPherson independent suspension and a rear suspension using a multi-link independent suspension.
6
1
Share

Why Does the Inside of the Car Windshield Frost Over?

The reason for frost forming on the inside of the car windshield is: after parking, the air humidity inside the car is relatively high. When the car's temperature drops, the moisture in the air inside the car condenses on the windows due to the cold. If the temperature drops to a certain level, the water droplets on the windows will freeze into ice. The windshield is an important part of the entire vehicle, designed to meet the needs of interior lighting, ventilation, and the driver's and passengers' visibility. Methods to remove frost from the inside of the car windshield include: 1. Use a hard plastic scraper to remove the ice; 2. Spray a de-icing agent on the windshield; 3. Cover the windshield with a cloth after parking; 4. After the engine's coolant temperature rises, turn on the car's heater to blow warm air on the windshield; 5. Open the doors to ventilate after parking, equalizing the temperature inside and outside the car.
16
0
Share

Why does the electric bike light turn on but it doesn't move when twisting the throttle?

Electric bike light turns on but it doesn't move when twisting the throttle due to: Brake power cutoff device failure: Issues such as damaged brake pads, rusted brake arms, or broken brake springs can cause this problem. Wiring harness failure: After prolonged use of electric motorcycles, wiring harnesses are prone to corrosion and rust. Relevant information about electric vehicles is as follows: Electric vehicles: Also known as electric-powered vehicles, they are divided into AC electric vehicles and DC electric vehicles. Working principle: Typically, electric vehicles use batteries as the energy source, converting electrical energy into mechanical motion through components like controllers and motors, with speed controlled by adjusting current intensity.
13
0
Share

How to Turn on the Ambient Lighting in Audi A4L?

Method to activate the ambient lighting in Audi A4L: The ambient lighting automatically turns on when the headlights are switched on, specifically when the low beams are activated. Ambient lighting, also known as LED ambient lighting, is a type of LED light that serves as an ideal choice for theme parks, hotels, homes, exhibitions, commercial spaces, and artistic lighting, creating the desired atmosphere for people's lives. Here is an introduction to car ambient lighting: 1. Interior ambient lighting serves as a light source that enhances the atmosphere inside the car, making it visually appealing and elevating the overall vehicle's class. The ambient lighting comes in various colors, and some models are equipped with multi-color ambient lighting, allowing for color switching. 2. Interior ambient lighting can help drivers relax more while driving at night, reducing drowsiness and making driving safer. 3. Appropriate ambient lighting can enhance the quality of the car's interior.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.