···
Log in / Register

What are the consequences of using one driver's license for four vehicles?

4 Answers
LeAdaline
07/29/25 2:57pm

The consequences of using one driver's license for four vehicles are as follows: 1. Illegal behavior: One vehicle cannot use four driver's licenses to handle traffic violation points. 2. Relevant regulations: According to the "Road Traffic Safety Law of the People's Republic of China," the "People's Republic of China Motor Vehicle Driver's License Management Regulations," and the "Motor Vehicle Traffic Violation Handling Regulations," a maximum of three drivers can accept point penalties for one vehicle. 3. Suspect identification: If more than three drivers (excluding the vehicle owner or manager) accept electronic police penalties for the same license plate vehicle within one year, the system will automatically flag the fourth driver as a suspected point trafficker.

Was this review help?
11
5
Share
NolanRose
08/13/25 7:33am

Having driven for many years, I know very well that having four points deducted from your driver's license is no small matter. First, you must comply with traffic regulations by attending a specialized traffic safety education course at the traffic police department, usually lasting half a day to a full day. The course covers a review of basic rules and analysis of common violations. At the end, there's a test—it's quite simple, but passing is mandatory to restore your points; failing means retaking the exam and possibly facing additional fines. Losing four points alone doesn’t revoke your license, but accumulating six or twelve points is risky, potentially leading to a suspension of driving privileges or even requiring license re-education. Cost-wise, the course may cost a few hundred yuan, on top of any previous fines. My advice is not to delay—handle it early to avoid risks, as safe driving is fundamental.

Was this review help?
1
2
Share
Expand All
SiennaDella
10/11/25 5:38am

I myself had 4 points deducted once after that rear-end collision, which cost me some points on the demerit record. The consequences were quite tangible: attending a traffic safety course took up most of a day—the test wasn’t hard but required effort. All fines had to be paid in full, or the record wouldn’t clear. After the deduction, I had to drive extra carefully to avoid accumulating more penalty points. Lower points might affect annual vehicle inspections or slightly increase insurance premiums. Time-wise, the whole process disrupted work and daily life. What proved most effective was developing safer driving habits post-course, like maintaining proper speed and situational awareness, to prevent future hassles.

Was this review help?
1
3
Share
Expand All
DelWillow
11/24/25 6:45am

The most significant consequence after deducting four points is the mandatory requirement to attend an educational course and pass the exam; otherwise, the points will not be restored. This system is designed to encourage drivers to reflect on their incorrect driving behaviors. A reduction in points indicates an increased risk, and any further violations could easily accumulate to more severe penalties. I always keep this in mind while driving, promptly handling the learning procedures, which include some study materials and fines. From a safety perspective, this mechanism protects everyone.

Was this review help?
20
4
Share
Expand All
More Forum Discussions

Where to Check the Production Date of Geely Headlights?

To read the production date of car headlights, you can check the stamp on the headlight. The stamp is generally located at the lower left or lower right corner of the headlight, and the production date can be directly seen from the stamp. Introduction to Car Headlights: Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of the car. They not only relate to the external image of the car owner but are also closely linked to safe driving at night or under bad weather conditions. The use and maintenance of car lights should not be overlooked. Precautions for Using Car Headlights: On roads without central separation facilities or center lines, when meeting another vehicle at night, you should switch to low beams when the oncoming vehicle is more than 150 meters away. When meeting non-motorized vehicles on narrow roads or narrow bridges, low beams should be used.
10
1
Share

Under what circumstances does the Audi front radar work?

Audi front radar operates under the following conditions: Obstacle ahead: When the car is moving, if there is an obstacle ahead that is detected by the front radar, the radar status will be displayed on the dashboard along with the position of the obstacle, and an alarm will sound to alert the driver. Speed does not exceed 12 km/h: When the car is moving at a speed not exceeding 12 km/h, the front radar remains active. Once the speed exceeds 12 km/h, the front radar stops working. Generally, the radar is active when the car is moving slowly. Radar moves away from obstacle: The front radar not only works when detecting an obstacle but also remains active for about 4 seconds after moving away from the obstacle. During this time, it cancels the information displayed on the dashboard and returns to the main interface. In this case, the front radar is still working.
6
5
Share

Does the Bora have a 1.5T engine?

The Bora has a 1.5T engine. Material aspects: The engine is constructed entirely from aluminum alloy, with all components from the valve cover to the cylinder head, cylinder block, and oil pan made of aluminum alloy. The entire engine weighs only 88 kilograms. Displacement aspects: The displacement is 1.5L, which is 0.1L less than the 1.6L engine. This reduction is achieved by decreasing the cylinder bore and shortening the piston stroke. The 1.5L engine has a cylinder bore of 74.5mm and a piston stroke of 85.9mm. The cylinder bore is the same as that of the 1.4T and 1.5T engines, while the piston stroke is 1mm shorter compared to the 1.6L engine. From the perspective of cylinder bore, this 1.5L engine shares the same 74.5mm measurement with the currently used 1.4T and the future 1.5T engines, demonstrating the powerful utilization of the unified modular platform.
7
4
Share

How to Adjust the Dashboard Time on Emgrand GS?

Here are the steps to adjust the dashboard time on Emgrand GS: 1. Press and hold the SET button below the dashboard for 3 seconds. 2. Press the button once more to see the hour digits flashing. 3. Press it again to see the minute digits flashing. 4. Adjust the hour and minute respectively, then press the confirm button to finish. More details about Emgrand GS: 1. The Emgrand GS is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 129Ps (95kw) and a peak torque of 235N·m, with a fuel consumption of 7L/100km. 2. The new Emgrand GS features an L2-level intelligent driving assistance system, enabling automatic stop-and-go and assisted cornering. It also comes with the GKUI Geek Intelligent Ecosystem, supporting remote engine start/stop, APP remote vehicle control, online navigation maps, and other functions, significantly enhancing the driving experience and convenience for owners.
14
0
Share

How to Steer in the Curve Driving Test for Subject 2?

Subject 2 curve driving steering methods are as follows: 1. Observe whether the edge lines coincide: After entering the S-curve, pay attention to observation. When the engine hood coincides with the right arc line, turn the steering wheel one full turn to the left. As the vehicle continues to move forward, when the left front of the car overlaps with the right arc line, turn the steering wheel half a turn to the left, make slight adjustments, and keep the front of the car overlapping with the arc line. 2. Observe the distance between the engine hood and the edge line: When one-third of the left front engine hood aligns with the arc line, turn the steering wheel one full turn to the right. 3. Observe the position of the front of the car and the edge line: When the right front of the car overlaps with the left arc line, start turning the steering wheel half a turn to the right, then make slight adjustments to keep the front of the car always overlapping with the left arc line.
1
1
Share

How to Tell if a Spark Plug is Worn Out?

Methods to determine if a spark plug is damaged: Remove the spark plug and observe it. Based on the following appearance colors, you can judge the condition of the spark plug. A normal spark plug has an insulator skirt and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm, and no signs of electrode burn. If the spark plug is covered in oil or deposits but is not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged, with signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plug with a new one. Additionally, if the spark plug appears black as if smoked, it indicates that the wrong heat range was selected or the air-fuel mixture is too rich, with oil creeping up.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.