What are the consequences of resetting the fuel consumption on the 10th-generation Civic?

What Are the Common Knowledge Points for Car Usage?

There are several key points to know about car usage: 1. Air conditioning usage: Car air conditioning mainly consists of three parts: air direction, fan speed, and temperature. 2. Use of recirculation mode: Recirculation mode means the air inside the car circulates without outside air. Use this mode when the outside air quality is poor or during summer. 3. Car wash precautions: Avoid rinsing a car that has been exposed to direct sunlight with cold water. In summer, the surface temperature of the car paint can become very high after prolonged exposure to sunlight. Washing the car at this time can cause the paint to contract suddenly due to the cold water, leading to damage. 4. Car tires: The typical lifespan of a car tire is three to five years. Even if the car is driven infrequently, tires should be replaced promptly after exceeding this period. 5. Dealing with a punctured tire: Always monitor tire pressure and avoid sudden acceleration or aggressive driving. If tire pressure is abnormal, find a safe place to replace the tire immediately.

15

4

Share

What is the normal pressure for a fuel pump pressure gauge?

Under normal circumstances, the fuel pressure provided by the fuel pump is generally around 3-3.5 bar. The gasoline pressure may vary depending on the vehicle model. The function of the fuel pump is to draw gasoline from the fuel tank and deliver it through the pipeline and fuel filter to the carburetor float chamber. It is precisely because of the fuel pump that the fuel tank can be placed at the rear of the vehicle, far from the engine and below the engine. According to the different driving methods, fuel pumps can be divided into two types: mechanically driven diaphragm type and electrically driven type. During operation, in addition to providing the fuel consumption required for engine operation, the fuel pump flow should also ensure sufficient return flow to maintain stable fuel system pressure and adequate cooling.

20

1

Share

What Are Some Useful Car Tips?

Here are some useful car tips: 1. Don't start driving immediately after ignition: After starting the car, wait for 1-2 minutes before driving. This allows the engine to lubricate properly, especially for turbocharged engines. Always remember: no warm-up, no drive. 2. Avoid high-speed driving: During the break-in period of a new car, there are strict requirements for speed. Normally, keep the speed below 80 km/h and never exceed 100 km/h. Keep the tachometer reading under 40,000 rpm. 3. Don't change the oil prematurely: Changing the oil immediately after purchasing the car can cause significant harm. The factory-installed oil has excellent performance, low viscosity, and strong oxidation resistance, so there's no need to replace it early. 4. Avoid emergency braking: Emergency braking can severely affect the break-in process of the braking system and increase the load on the car's engine.

19

2

Share

What are the effects of slamming car doors?

Slamming car doors can affect the window regulator, hinges, door stopper, sound insulation layer, door lock, and sensors. Over time, it will reduce the lifespan of the door, damage the window regulator (which may shift or deform), and cause the window to get stuck halfway when rolling up or down, rendering it unusable. The sound insulation layer can also be damaged. More details are as follows: Door damage: While driving, sound insulation effectiveness will decrease, leading to a significant increase in noise; the door may age prematurely, causing hinges and stoppers to loosen, resulting in localized wear, paint peeling, and rust. It can also damage the connections of various plastic components inside the car, causing loose fasteners to rattle. The correct way to close a car door: After exiting the vehicle, push the door to a position 10-15 cm away from the B-pillar, then gently push it closed. This method minimizes noise and reduces wear and tear on the car.

17

5

Share

Can Slamming the Car Door Cause Damage?

The car door includes components such as the window regulator, audio system, door lock, horn, anti-collision beam, waterproof layer, and sound insulation layer. Long-term forceful door slamming can lead to loosening of hinges, limiters, audio systems, sensors, and other parts, accelerate the aging of sealing strips, damage the sound insulation layer, reduce noise isolation effectiveness, and easily cause displacement and deformation of the window regulator, affecting the door's lifespan. 1. How to properly close the car door: After exiting the vehicle, push the door to a distance of 10-15cm from the car body, then gently close the door with a slight force. Alternatively, slowly push the door until it closes before releasing, which can effectively protect the door. 2. Door maintenance tips: Without regular maintenance of door opening and closing, hinges and limiters may experience increased wear and rust if not lubricated in time, potentially leading to malfunctions. Professional equipment can be used for a comprehensive vehicle inspection, and original grease can be applied to lubricate the door hinges and limiters, reducing wear and tear.

12

4

Share

Will driving 200 kilometers in S mode damage the car?

Driving 200 kilometers in S mode can potentially harm the vehicle. The S mode merely delays gear shifts without altering other operational aspects, which inevitably increases the transmission's workload in the short term, raises its temperature, and consequently accelerates wear. Therefore, it's advisable to avoid prolonged use of S mode. In terms of fuel consumption, since higher engine speeds require more fuel injection, S mode consumes significantly more fuel compared to normal driving mode. Tips for maintaining your car's transmission: Smooth driving: Avoid aggressively emphasizing acceleration speed in automatic transmission vehicles, as they are designed for comfort. During normal driving, pressing the accelerator pedal about one-third of the way is sufficient, allowing the transmission control unit to manage gear shifts based on vehicle speed and engine load signals. Early upshifting: If the automatic transmission shifts gears late, avoid stomping on the accelerator, as this will only produce the opposite effect. The timing of gear shifts in an automatic transmission is determined by the control unit based on vehicle speed and engine load signals, with the latter being influenced by the degree of throttle input.

3

0

Share

What are the consequences of resetting the fuel consumption on the 10th-generation Civic?

What Are the Common Knowledge Points for Car Usage?

What is the normal pressure for a fuel pump pressure gauge?

What Are Some Useful Car Tips?

What are the effects of slamming car doors?

Can Slamming the Car Door Cause Damage?

Will driving 200 kilometers in S mode damage the car?

Why is the fuel consumption gauge fluctuating erratically?

What are the effects of fuel pump pressure relief on a vehicle?

How far can you drive when the fuel gauge is empty?

What are the symptoms of a faulty fuel pump control module?