What are the consequences of putting white sugar in the engine?

1 Answers
AndresFitz
07/30/25 5:24am
Putting white sugar in the engine can cause irreparable mechanical damage to the engine. Since white sugar does not dissolve in engine oil and melts as the engine temperature rises, it increases the viscosity of the oil and disrupts normal oil circulation. Large sugar particles cannot pass through the oil coarse filter, affecting the oil pump's pressure. Melted sugar at high temperatures can enter the oil filter, causing blockages and reducing the engine's lubrication performance. Below is additional information: 1. Impact: Modern engine oil filtration systems are highly efficient and won't show immediate issues. Severe engine damage would require a large amount of sugar, prolonged intervals between oil changes, repeated mixing of sugar into the oil, or an older vehicle. 2. Carbon buildup: Sugar particles that pass through the fuel supply system and filters can still enter the engine as fine particles. When burned, sugar's CHO elements can lead to carbon deposits, causing damage to the engine.
Was this review help?
20
3
Share
More Forum Discussions

What Does Four-Door Limit Maintenance Mean?

Four-door limit maintenance refers to the maintenance of the door limiters. Below is a relevant introduction about car maintenance: 1. First maintenance: Some manufacturers will schedule the first maintenance based on time or mileage. The exact timing should be referred to the vehicle's user manual or warranty manual. The first maintenance is very important and is usually free, so it is crucial to remember to get it done to avoid missing it, which could affect the car's three-year warranty. 2. Maintenance items: The main items of car maintenance include replacing engine oil, oil filters, transmission fluid, spark plugs, cabin air filters, engine air filters, brake fluid, etc. However, not all these items need to be replaced during every maintenance session; it depends on their service life. In addition, maintenance also involves the inspection and upkeep of dozens of items across multiple systems, including the engine, transmission, air conditioning system, steering system, braking system, suspension, body, and tires.
20
3
Share

What are the differences between the Mercedes-Benz GLE450 and GLS450?

The differences between the Mercedes-Benz GLE450 and GLS450 are: 1. Different body structures: The GLE has a 5-door, 5-seat configuration; the GLS450 has a 5-door, 7-seat configuration. 2. Different body dimensions: The GLE measures 4930mm in length, 1950mm in width, and 1787mm in height; the GLS450 measures 5218mm in length, 2023mm in width, and 1823mm in height. Both the GLS450 and GLE450 are equipped with a 3.0-liter turbocharged inline-six engine, delivering a maximum power of 270kW and a maximum torque of 500Nm. The maximum torque is available between 1600 to 4500 rpm, while the maximum power is achieved at 6400 rpm. They feature a 48V mild hybrid system and direct fuel injection technology, with an aluminum alloy cylinder head and block.
13
3
Share

What Causes Insufficient Fuel Supply in a Car?

Here are the specific reasons for insufficient fuel supply in a car: 1. Low engine temperature: During cold starts in winter, the temperature inside the engine is insufficient, and both the fuel and lubricating oil are not warm enough. More fuel should be injected during cold starts to meet power requirements. Poor fuel atomization at low temperatures leads to reduced ignition energy, thereby affecting performance. 2. Carbon deposits in the engine and intake manifold: Carbon deposits can absorb an appropriate amount of fuel, causing the ECU to make incorrect judgments. For example, if the computer controls the injection of 100 units of fuel-air mixture, only 90 units actually enter the cylinder, with 10 units absorbed by carbon deposits. Even if the remaining 90 units of mixture burn completely, the required power output cannot be achieved. 3. Ignition system malfunction: Aging of the ignition system weakens the ignition energy, causing the ignition coil or spark plugs to fail to ignite continuously or to experience interruptions during ignition. Intermittent ignition prevents smooth and continuous power output.
12
1
Share

Can a car be repainted with just a clear coat?

It is possible to repaint a car with just a clear coat, but it should be done at a professional auto repair shop or a 4S dealership. A car's paint surface consists of four layers, from the inside out: the electrocoat layer, the primer layer, the base coat (color layer), and the clear coat layer. After the entire car body is assembled, robots immerse the body in an electrocoating bath, forming an electrocoat layer on the surface, which serves as rust protection. Minor scratches typically remain on the clear coat layer and can be removed through simple polishing. However, frequent polishing is not recommended, as it reduces the thickness of the clear coat, leading to a loss of gloss over time. If there are minor scratches on the clear coat, they can generally be ignored. However, if the scratches penetrate to the base coat, a full repaint is required for repair.
7
3
Share

What are the dimensions of the Mercedes-Benz GLE?

The length, width, and height of the Mercedes-Benz GLE are 4941mm, 2018mm, and 1782mm respectively, with a wheelbase of 2995mm. The Mercedes-Benz GLE is a mid-to-large luxury SUV, so the interior space of this vehicle is relatively spacious. The Mercedes-Benz GLE is equipped with two engines: one is a 2.0-liter turbocharged engine, and the other is a 3.0-liter turbocharged engine. Both engines are paired with a 9-speed automatic transmission (9AT). The 9AT transmission offers excellent shift smoothness, along with good reliability and durability. The front suspension of the Mercedes-Benz GLE uses a double-wishbone independent suspension, while the rear suspension employs a multi-link independent suspension. The Mercedes-Benz GLE is equipped with a full-time four-wheel-drive system and utilizes a multi-plate clutch-type central differential.
10
4
Share

How to Make a U-turn in a Car?

The method for making a U-turn in a car is: 1. According to the traffic light signal, drive forward. If there is a crosswalk at the intersection, when the car enters the crosswalk, turn the steering wheel to the right. While turning the steering wheel, observe through the right rearview mirror to see if any vehicles are approaching from the right; 2. When the car has completely left the crosswalk, the turning radius of the car on the road will increase. At this point, turn the steering wheel fully to the left and maintain driving to complete the U-turn. Precautions for making a U-turn in a car: 1. Intersections with U-turn signs and markings allow U-turns; 2. If there is a left-turn guide lane and no no-U-turn sign, you can use the left turn to make a U-turn after crossing the crosswalk; 3. If there is a dashed line from the double yellow line to the front end of the crosswalk, you can use the left-turn area to make a U-turn in advance before the crosswalk.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.