What are the consequences of oil leakage in a 2011 Buick Excelle engine?

1 Answers
OEliza
09/08/25 2:05am
Consequences of oil leakage in a 2011 Buick Excelle engine: It will affect the engine's working efficiency, leading to reduced vehicle power; it may produce abnormal noises, and the engine may experience unstable idling or poor acceleration during operation; overtaking performance may also be diminished. Specific details are as follows: Oil pan damage: Since most vehicles have relatively low ground clearance, if the driver operates the vehicle on rough or poor road conditions, the oil pan may be damaged due to scraping or impacts from flying stones. As the container for storing engine oil, any damage to the oil pan will immediately result in oil leakage (most oil pans are made of aluminum alloy, though some are constructed from stamped steel plates). Drain plug loosening or stripping: If during vehicle maintenance or oil changes, the drain plug becomes loose or stripped due to worker negligence or improper operation, the engine will inevitably leak oil.
Was this review help?
10
3
Share
More Forum Discussions

What is the purpose of adding urea in a vehicle?

The purpose of adding urea in a vehicle: It is used for cars, trucks, buses, and heavy-duty non-road diesel engine vehicles equipped with SCR systems to purify vehicle exhaust, reduce nitrogen oxide emissions in the exhaust, optimize engine performance and fuel consumption, and reduce diesel consumption by up to 6%, significantly lowering costs. The NOx in diesel vehicle exhaust mainly consists of nitrogen monoxide (NO). If the NO concentration is too high, it can affect human pulmonary function and cause central nervous system disorders. When exhaust is discharged from the engine combustion chamber, the electric pump, following the instructions of the electronic control unit, draws an adequate amount of urea solution from the urea tank. The urea solution is mixed and atomized with compressed air and enters the injection pipeline, where it is evenly sprayed into the exhaust through the urea nozzle. At this point, the urea solution decomposes under high temperature to produce ammonia (NH3), which then undergoes a catalytic reduction reaction with NOx, ultimately producing harmless gases and water that are discharged.
6
4
Share

What brand is the Kuga's transmission?

The Kuga's transmission is jointly developed by Ford and General Motors, with the model number 6f35. The transmission is a mechanism used to change the speed and torque from the engine, capable of fixing or changing the gear ratio between the output shaft and the input shaft in steps. The transmission consists of a gear transmission mechanism and a control mechanism, with some vehicles also having a power output mechanism. Most transmission mechanisms use ordinary gear transmission, while some use planetary gear transmission. The Kuga is a compact SUV under Changan Ford. Taking the 2019 Kuga EcoBoost 180 2WD Jingyi model as an example, the body adopts a 5-door, 5-seat structure with a fuel tank capacity of 60 liters. In terms of power, the 2019 Kuga EcoBoost 180 2WD Jingyi model is equipped with a 1.5L inline four-cylinder turbocharged engine, with a maximum power of 134kW and a maximum torque of 243Nm, matched with a 6-speed automatic transmission.
1
1
Share

How to Replace a Lost Vehicle License Under a Company Name?

Materials required for replacing a vehicle license include: 1. Vehicle registration business process record form. 2. Vehicle registration/transfer registration form. 3. Application form for replacement or reissuance of vehicle license plates and certificates. 4. Vehicle registration certificate. 5. Original and copy of the owner's ID card. 6. Three vehicle photos. 7. Power of attorney and the identity proof of the authorized person. 8. For non-local residents, original and copy of temporary residence permit are required. Additional information: Requirements for vehicle license photographs: 1. Size: 60x88mm. 2. Angle: Taken from a 45-degree angle at the front left of the vehicle. 3. Others: The vehicle should occupy more than 2/3 of the photo, with rounded corners of 3mm radius.
5
5
Share

What to Do If You Really Can't Pass the Driver's License Test?

You need to adjust your mindset and practice multiple simulations. Here is the relevant content introduction: 1. Psychological quality: Many people fail the test multiple times, mainly due to poor psychological quality. 2. Test opportunities: Each test subject has five opportunities, and each test has two chances, which is equivalent to ten opportunities per subject. 3. Re-registration: If you fail all ten attempts, you can only re-register and take the test again. Here is the extended information for registering for the driver's license test: 1. Color photos: Seven one-inch color photos with a white background. 2. Registration fee: Cash, card payment, or bank transfer. 3. ID card copy: A copy of your ID card, with both sides copied onto one sheet of paper. 4. Household registration copy: For non-local residents, a residence permit is also required.
19
0
Share

Is the C1 Driver's License Easy to Obtain?

C1 driver's license is relatively easy to obtain. Here is the relevant information: 1. Vehicle types permitted with a C1 license: small and mini passenger vehicles, light and mini cargo vehicles, as well as light, small, and mini special purpose vehicles. Holding a C1 license also allows driving vehicles permitted under C2, C3, and C4 licenses. 2. Small cars: Small cars refer to vehicles with a total mass of less than 4.5 tons, seating capacity not exceeding 9 people, and a length under 6 meters. 3. Vehicle types not permitted with a C1 license: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary tricycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams.
7
4
Share

What does E4 mean on car glass?

The letter E represents the certification mark of the European Union, and the number 4 stands for the Netherlands. E4 on car glass indicates that it was produced in the Netherlands. There are also E1, E2, E3...E16, which correspond to different countries. The specific list is as follows: E1—Germany; E2—France; E3—Italy; E4—Netherlands; E5—Sweden; E6—Belgium; E7—Hungary; E8—Czech Republic; E9—Spain; E10—Yugoslavia; E11—United Kingdom; E12—Austria; E13—Luxembourg; E14—Switzerland; E16—Norway; E17—Finland; E18—Denmark; E19—Romania; E20—Poland; E21—Portugal; E22—Russia; E23—Greece; E25—Croatia; E26—Slovenia; E27—Slovakia; E28—Belarus; E29—Estonia; E31—Bosnia and Herzegovina; E37—Turkey. The E-mark originates from the regulations (Regulation) issued by the Economic Commission for Europe (ECE). Currently, the ECE includes 28 European countries, not only EU member states but also non-EU countries in Eastern and Southern Europe. ECE regulations are recommendations for member states to adopt and are not mandatory standards. Member countries can either apply ECE regulations or continue to use their own national regulations. Market acceptance: Generally, ECE member states are willing to accept test reports and certificates that comply with ECE regulations. E-mark certification covers products such as components and system parts. Products that obtain E-mark certification are widely accepted in the market. Common E-mark certified products in China include automotive bulbs, safety glass, tires, warning triangles, and automotive electronic products.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.