What are the consequences of not replacing engine mounts?

1 Answers
MacAvery
07/29/25 10:24pm
Failure to replace engine mounts in a timely manner can lead to increased vehicle vibration, accelerating the wear and tear of internal components. Below are specific details about engine mounts: 1. Vibration Dampening: During engine operation, certain vibrations are generated. The rubber components in engine mounts help eliminate resonance produced by the engine. 2. Pressure Relief Function: Some engine mounts also feature hydraulic pressure relief. If a mount is damaged, the vibrations from the engine can cause the entire vehicle body to vibrate. 3. Impact of Damage: Typically, there are three engine mounts secured to the vehicle frame. If one is damaged and not replaced promptly, it disrupts balance and can accelerate the deterioration of the other two.
Was this review help?
16
3
Share
More Forum Discussions

How to Adjust the Audio System in BMW 3 Series?

In the BMW 3 Series, the volume can be adjusted either on the air conditioning panel or the steering wheel. To adjust the treble, bass, and tone, select the tone option in the settings or choose the tone adjustment in the external devices. Here are some maintenance tips for the BMW 3 Series audio system: 1. The main unit is significantly affected by weather, especially the circuit board and plastic components. The parameters of the electronic components on the circuit board vary with temperature changes. Therefore, if the car's interior temperature is high, it is advisable not to turn the audio volume too high, as this can affect both the sound quality and the lifespan of the audio system. 2. The mechanical part consists of metal and plastic components combined with a circuit board. Note that external high-power amplifiers are more sensitive to temperature changes and require large-capacity heat dissipation. Hence, during summer, ensure that the external amplifier is well-ventilated when using the audio system.
10
0
Share

What Are the Consequences of Starting the Engine in Gear?

Starting the engine while in gear can damage the car's starter motor and parking brake, as well as cause wear and tear on other mechanical components. It may also lead to the vehicle lurching forward, potentially resulting in an accident. The car should always be in neutral when starting, except on steep slopes where being in gear can prevent the vehicle from rolling backward. Here are some tips for shifting gears in a car: 1. Shift gears according to the car's speed; 2. If the vehicle starts to shake, immediately downshift by one or two gears based on the situation; 3. Coordinate the clutch and throttle properly when shifting gears; 4. Master the correct hand position for shifting: palm facing down, covering the gear lever head, and gripping it firmly with all five fingers; 5. Ensure the gear is fully engaged when shifting.
8
5
Share

What are the reasons for the fuel pump not supplying fuel?

The reasons for the fuel pump not supplying fuel include excessive clearance between the inner and outer rocker arms; broken rocker arm; ruptured pump diaphragm; poor sealing of the inlet and outlet oil valves, etc., all of which can cause poor fuel supply from the fuel pump. Below is an introduction to troubleshooting the issue of the fuel injection pump not supplying fuel: 1. The causes of the fault are: no fuel in the tank; clogged diesel filter or fuel line; fuel transfer pump not supplying fuel; air present in the fuel supply system; broken plunger spring in the fuel injection pump; fuel injection pump plunger stuck and unable to operate; ruptured sealing copper gasket of the delivery valve assembly or broken spring. 2. Troubleshooting methods: fill up with diesel; replace the diesel filter element and clean the fuel line; inspect and repair the fuel transfer pump; remove air; replace the plunger spring in the fuel injection pump; inspect the fuel injection pump plunger; replace the sealing copper gasket or spring of the delivery valve assembly.
17
5
Share

How to match the electronic power steering computer of Volkswagen Polo?

Steps to match the electronic power steering computer of Volkswagen Polo: 1. Turn the key to the second gear, connect the diagnostic computer, and enter the power steering system; 2. Select 16 security login, enter the password 20103 and click the confirm button to log in successfully; 3. Click 04 system basic adjustment, select the reset point of all matching values and confirm; 4. Click the adjustment button, wait for 2 seconds until the computer displays correct completion; 5. Return to the fault code reading page, read the fault code, and after the computer shows no fault code, start the vehicle directly. If the power steering light turns off automatically, it means the matching is successful. Volkswagen Polo is a small car under Volkswagen, with a body structure of 5-door 5-seat hatchback, dimensions of 4053mm, 1740mm, 1449mm, and a wheelbase of 2564mm.
13
2
Share

Can a plug-in hybrid run without charging all the time?

Plug-in hybrid cannot run without charging all the time. Plug-in hybrid electric vehicle (PHEV) is a type of vehicle between an electric vehicle and a fuel vehicle, equipped with both the engine, transmission, drive system, fuel line, and fuel tank of a traditional fuel vehicle, as well as the battery, motor, and control circuit of an electric vehicle. The battery capacity can also support driving in pure electric mode for a certain distance and provides a charging interface. Plug-in hybrid vehicles will not run out of power while driving. If there are charging piles nearby, they can be driven as an electric vehicle. When driving a plug-in hybrid vehicle, it can operate in pure electric mode or hybrid mode. In the battery hold mode, the vehicle is also in hybrid mode, similar to a regular hybrid vehicle. It starts in pure electric mode, the engine intervenes when speed increases, and kinetic energy is recovered during coasting and braking.
3
1
Share

What is the difference between used cars and new cars?

The differences between used cars and new cars are as follows: 1. Different vehicle conditions: After a new car comes off the production line, its condition is at its best, with all parts being brand new. For users, this provides peace of mind, and the cost of replacing any issues during the warranty period is relatively low. Used cars have been used by at least one previous owner, and the wear and tear on the vehicle's parts vary depending on the previous owner's usage. Most used cars are sold without warranty coverage, and many parts are nearing their replacement period. Whether it's regular maintenance or repairs for issues, the costs are generally higher than for new cars. 2. Different initial investment costs: The cost of a new car includes the purchase price + purchase tax + insurance fees + other miscellaneous expenses, while a used car only involves the car price + service fee. 3. Different psychological perceptions: Traditional Chinese psychology favors buying new over old, so the psychological acceptance of new cars is relatively higher than that of used cars.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.