What are the consequences of not handling motorcycle traffic violations?

1 Answers
VanTimothy
07/30/25 4:23am
The consequences of not handling motorcycle traffic violations include incurring late fees and carrying over penalty points to the next scoring cycle. Below are the relevant details: 1. Incurring late fees: Failure to pay the fine will result in late fees. According to the 'Procedures for the Handling of Road Traffic Safety Violations,' if the fine is not paid by the due date, an additional 3% of the fine amount will be charged daily, with the total additional fine not exceeding the original fine amount. The maximum additional fine can be up to double the original fine. 2. Carrying over penalty points to the next scoring cycle: Additionally, as stipulated in the 'Implementation Regulations of the Road Traffic Safety Law,' if a motor vehicle driver's penalty points within a scoring cycle do not reach 12 points and the imposed fine has been paid, the penalty points will be cleared. However, if the penalty points do not reach 12 points but the fine remains unpaid, the penalty points will be carried over to the next scoring cycle.
Was this review help?
12
5
Share
More Forum Discussions

What is the GT-R?

Here is a detailed introduction to the Nissan GT-R: 1. Overview: The Nissan GT-R refers to a high-performance, high-reliability, high-power sports car produced by Nissan Motor. The GT-R model emerged after years of evolution and improvement in Nissan's Skyline sedan series, becoming the highest version of the series and adored by countless fans. 2. Powertrain: It is still equipped with the familiar 3.8L V6 twin-turbocharged engine. However, with this facelift, engineers have slightly increased the power output by adjusting the turbo boost value and the individually controlled ignition timing system for each cylinder. The maximum power has been increased from the original 397 kW (540 PS) to 408 kW (555 PS), with a peak torque of 632 N·m. The benefit of this adjustment is improved power performance at mid-range speeds, with official data indicating enhanced acceleration performance beyond 3200 rpm. It is still paired with a rear-mounted 6-speed dual-clutch transmission.
1
4
Share

What time period do National III vehicles refer to?

The National III standard was implemented starting from July 1, 2007, and the National IV standard was implemented on July 1, 2010, marking the end of the National III era. Vehicles produced between 2007 and 2010 all comply with the National III standard. Below is a related introduction to National III and National IV: 1. National III emission standard: Mainly refers to HC emission values below 0.2g/km, CO emission values below 2.3g/km, NOx emission values below 0.15g/km, with no PM requirement. 2. National IV emission standard: Mainly refers to HC emission values below 0.1g/km, CO emission values below 1.0g/km, NOx emission values below 0.08g/km, with no PM requirement.
10
5
Share

What kind of car is Porsche?

Porsche is a German automobile manufacturer based in Stuttgart. The brand produces sports cars, sedans, and SUVs. Porsche's SUV lineup includes the Macan and Cayenne. The Cayenne is a mid-to-large-sized SUV with dimensions of 4918mm in length, 1983mm in width, and 1696mm in height, featuring a wheelbase of 2895mm. It adopts a front-engine, all-wheel-drive layout and has a fuel tank capacity of 100 liters. The Cayenne is equipped with three engine options: a 3.0-liter turbocharged engine, a 4.0-liter twin-turbocharged engine, and a 2.9-liter twin-turbocharged engine, all paired with an 8-speed automatic transmission.
6
3
Share

How often should the belt next to the car engine be replaced?

Car engine belts should be replaced approximately every 60,000 to 80,000 kilometers. The replacement cycle for engine belts varies among different vehicle models. Once exceeding 50,000 kilometers, regular inspections are recommended to promptly detect any abnormalities in the timing belt, primarily by listening for unusual sounds. Signs of wear or abnormalities often manifest as abnormal noises or unusual odors caused by wear. The timing belt is a crucial component of the engine and plays a key role in its normal operation. It is an essential part of the engine's valve system, connecting the crankshaft and camshaft to ensure the accurate timing of intake and exhaust through a specific transmission ratio. If the timing belt fails, the valves and ignition system will cease to function, and in severe cases, the cylinder head may also be damaged.
2
0
Share

What is the 0-100 km/h acceleration time for the Civic?

0-100 km/h acceleration refers to the time it takes for a car to accelerate from a standstill to 100 km/h after ignition. For the 2021 Civic, the CVT New Edge Control model has a 0-100 km/h acceleration time of 9.3 seconds, the manual Joy Control model is 9 seconds, and the CVT Sport Control and Sport Control models are 9.6 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, indicates how much force is available. The greater the torque, the more force is applied to propel the vehicle, resulting in faster acceleration. The 2021 Civic HATCHBACK-220TURBO-CVT Sport Control has a maximum torque of 180 Nm and a 0-100 km/h acceleration time of 9.6 seconds. Transmission efficiency: The transmission acts as a medium for transferring power, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The 2021 Civic HATCHBACK-220TURBO-CVT Sport Control is equipped with a CVT continuously variable transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. The Civic has a power-to-weight ratio of 132 Hp/T, with a 0-100 km/h acceleration time ranging from 8.6 to 11.3 seconds.
15
4
Share

How to Adjust the Golf's Rearview Mirror?

Golf rearview mirror adjustment method: 1. Locate the electric adjustment button on the left door, observe the white dot on the adjustment button and the letter L next to it, which represents the left rearview mirror, and R represents the right rearview mirror; 2. To adjust the angle of the left rearview mirror, rotate the adjustment knob's white dot to the L position; 3. Lift the knob upwards to change the rearview mirror's viewing angle upwards, similarly, press the knob downwards to change the rearview mirror's viewing angle downwards, and use the same method of turning the knob for left and right adjustments; 4. To adjust the angle of the right rearview mirror, rotate the adjustment knob's white dot to the R position; 5. After adjusting the angles of both left and right rearview mirrors, rotate the adjustment knob's white dot to the O position. The Golf is a compact car under the Volkswagen brand, with dimensions of 4259 mm in length, 1799 mm in width, and 1476 mm in height, and a wheelbase of 2637 mm.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.