What Are the Consequences of Not Changing Transmission Fluid?

1 Answers
VanessaLynn
07/29/25 11:59pm
The effects of not changing transmission fluid are as follows: 1. Reduced oil pressure: The transmission fluid becomes thicker, leading to decreased oil pressure, obstructed internal cooling, and elevated oil temperature, thereby shortening the lifespan of the transmission and drive components. 2. Slippage phenomenon: Failure to change the transmission fluid may result in weak acceleration when starting and frequent slippage during driving. 3. Accelerated wear: Prolonged neglect of transmission fluid changes causes the fluid to degrade and evaporate under high-speed and high-temperature conditions, leading to rapid component wear and damage to internal transmission parts. Additional impacts include: 1. Impaired vehicle performance: Not changing the transmission fluid affects vehicle performance. During transmission use, friction between metal components generates debris and impurities, causing the transmission fluid to become dirty over time. This affects gear shifting, clogs oil passages, leads to rough shifting, reduces transmission efficiency, weakens acceleration, and may increase fuel consumption to some extent. Degraded transmission fluid can result in poor lubrication, accelerated component wear, and corrosion, shortening the transmission's lifespan. 2. Regular inspection required: Transmission fluid should be checked regularly, typically replaced every approximately 80,000 kilometers. Different transmissions have varying designs and performance requirements, necessitating specific viscosity indices and lubrication standards for the transmission fluid. Using incorrect transmission fluid may cause jerky or rough transmission operation during driving.
Was this review help?
15
0
Share
More Forum Discussions

Where Are the Common Mistakes in the Curve Driving Test for Subject Two?

The common mistakes in the curve driving test for Subject Two are as follows: 1. The vehicle enters the curve driving test area. 2. When entering the S-curve, pay attention to the position of the front of the car, ensuring the outer front wheel stays close to the right edge of the curve. Use first gear with half-clutch to move forward without stopping. Continuously observe the left and right rearview mirrors to keep the vehicle aligned with the S-path. 3. Turning left: Keep the vehicle close to the right side. When the left front corner aligns with the right edge line, turn the steering wheel one full turn to the left while making minor adjustments to keep the left front corner aligned with the right edge line. This ensures the vehicle follows the S-path without crossing or touching the lines. After completing the left turn, prepare for the right turn. 4. Turning right: When the left front corner gradually passes the right edge line of the left turn, keep the steering wheel steady. Once the right vertex of the front hood touches the left edge line of the right turn, straighten the steering wheel and move forward slowly. 5. When the left one-third of the front hood touches the left edge line of the right turn, turn the steering wheel one full turn to the right while making minor adjustments to align the right front corner with the left edge line of the right turn. This ensures the vehicle follows the S-path without crossing or touching the lines.
12
2
Share

What is the wp1aa295 Porsche?

wp1aa295 Porsche represents the vehicle brand as Porsche, with the model number WP1AA295. Below is more information about Porsche: 1. Introduction: Porsche, a world-renowned luxury car brand under Volkswagen Group, is famous for producing high-end sports cars globally. Also known as 'Porsh', its headquarters is located in Stuttgart, Germany, and it is one of the main representatives of European and American automobiles. 2. Main Models: include the 911, 718, Boxster, Cayman, Panamera, Cayenne, and Macan.
3
1
Share

What is the structure of a seat belt?

Seat belt structure consists of three parts: belt, rope, and metal fittings. The following is a detailed introduction about seat belts: 1. Structural types: single waist belt type, single waist belt plus single shoulder strap type, single waist belt, double shoulder straps plus double leg straps type. 2. Basic principle: The ideal seat belt operation process is to tighten promptly and firmly "press" the person into the seat without hesitation at the first moment of an accident. Then, moderately loosen the belt after the peak impact force has passed or when the person can be protected by the airbag, to avoid rib injuries caused by excessive tension.
2
2
Share

Where is the Austone Tire brand from?

Austone Tire is a product of Prinx Chengshan (Shandong) Tire Company. Here is some extended information: 1. Company: Prinx Chengshan (Shandong) Tire Company is a modern enterprise specializing in tire R&D, manufacturing, and sales. It is one of China's most influential tire companies, headquartered in Rongcheng, Shandong. 2. Prinx Chengshan Tire Company possesses: a national-level enterprise technology center, a postdoctoral workstation, and has established the Qingdao Industrial Research and Design Center and the Rongcheng Tire Testing Center. It has been successively selected as a cultivation enterprise for Shandong Province's Manufacturing Innovation Center and a National Technology Innovation Demonstration Enterprise, among other honors.
3
5
Share

How to Reset the Maintenance Light on Beijing BJ40?

Here is the method to reset the maintenance light on Beijing BJ40: 1. Turn on the ignition. 2. Select Beijing Auto V11.30 or higher version. 3. Choose [Traditional Diagnosis]. 4. Under [Beijing Auto], select [BJ40L (2018 Model) Series] and then the [BJ40PLUS (Gasoline Version)] model. 5. Select [Quick Test] to scan the entire vehicle system status, then choose [System Selection] (either method is acceptable), and enter [IPC (Instrument Panel Cluster)] system. 6. Select [Special Functions]. 7. Choose [Maintenance Mileage Setting], input the next maintenance mileage, and the maintenance light will turn off upon successful execution.
20
1
Share

How to Turn on the High Beam of Ford Edge?

Ford Edge high beam activation steps are as follows: 1. Push the control lever on the Edge steering wheel forward to turn on the high beam. 2. Push the lever forward again or pull it toward you to turn off the high beam. Here is extended information about using car lights: 1. Light switches come in rotary handle and dial types. 2. When meeting another vehicle at night, switch to low beam when the opposing vehicle is more than 150 meters away. 3. Use low beam when meeting non-motorized vehicles on narrow roads or bridges at night. 4. When passing through signal-controlled intersections at night, use low beam when turning.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.