···
Log in / Register

What are the consequences of not changing the truck air filter for a long time?

3 Answers
VanCole
07/29/25 10:34am
Truck air filters that are not changed for a long time will clog the intake tract, affecting the engine's air intake, resulting in sluggish acceleration and increased fuel consumption. Below is relevant information about air filters: Consequences of not changing the air filter for a long time: Many impurities in the air enter and burn together with gasoline, causing incomplete combustion. These impurities deposit and accumulate, forming carbon deposits, leading to insufficient vehicle power and increased fuel consumption, thus entering such a vicious cycle. Function of the air filter: The air filter can block dust and road dirt from entering the engine. These hard particles can cause internal engine wear, scratch cylinder surfaces, adhere to tightly fitted parts, and cause surface wear on exposed and lubricated components.
Was this review help?
16
1
Share
DelEvangeline
08/13/25 3:01pm
After driving trucks for twenty years, I've found that not changing the air filter can cause a lot of trouble. When it's clogged for a long time, air can't get into the engine, leading to poor combustion, and the vehicle's power becomes as weak as an old ox pulling a cart. I once delayed replacing the filter for eight months on one of my trucks, and the fuel consumption shot up by 15%. On long trips, I had to refuel more frequently, costing me an extra two hundred bucks a month on gas. Even worse, dust got inside, scratching the pistons and cylinder walls, and the repair bill came to five thousand dollars. During rainy seasons when roads are slippery, the lack of power made braking less effective, significantly increasing safety risks. Now, I make it a habit to check every three months. Replacing the filter only costs a few dozen bucks, but it keeps the truck running smoothly and gives me peace of mind. Don't let small issues ruin a big vehicle—maintenance is key.
Was this review help?
10
5
Share
Expand All
LeKylie
10/07/25 5:48am
Running a small freight company, I place great emphasis on the impact of filter maintenance on costs and efficiency. If truck air filters aren't replaced for extended periods, engine efficiency drops significantly, fuel consumption increases by 10-20%, leading to thousands in extra fuel costs annually. Wear issues are worse: dust entering core engine components causes oil burning and power loss, with repair bills potentially exceeding tens of thousands. Our fleet had a truck down for a week due to filter failure, losing orders and rental time. Regular replacement prevents such mishaps, maintains stable vehicle condition, improves attendance rates, and reduces carbon emissions. Using management software to track maintenance records can even boost used vehicle residual value by 5% - saving money and hassle. Don't let negligence hurt your business.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

Do I need a license to ride a motorcycle?

Motorcycles are classified as motor vehicles and require a driver's license. The following is an introduction to motorcycle licenses: Types of motorcycle licenses: To ride a motorcycle, you need either a D, E, or F license. The required license type varies depending on the engine displacement or maximum design speed. A D license allows you to ride a three-wheeled motorcycle with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h. An E license permits riding a two-wheeled motorcycle with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h. An F license is for motorcycles with an engine displacement of 50ml or less and a maximum design speed of 50km/h or less. Motorcycle license test subjects: Similar to a car driver's license, the motorcycle license test consists of four subjects. Subjects 1 and 4 are theoretical knowledge tests, Subject 2 is a field driving skills test, and Subject 3 is a road driving skills test.
4
5
Share

What are the differences between Toyota and Honda?

Here is a related introduction to the differences between Toyota and Honda: 1. Honda not only manufactures cars but also produces motorcycles, airplanes, agricultural machinery, etc. Toyota primarily produces cars, and Toyota's car production and sales are higher than Honda's. 2. Honda is a technology-driven company, and the cars it produces have better handling, while Toyota's cars are more suitable for commuting. Honda cars are ideal for consumers who enjoy driving, whereas Toyota cars are better suited for those who use them purely as a means of transportation. 3. The common features of both Honda and Toyota cars are reliability and safety. Honda cars have slightly better handling than Toyota cars, mainly due to the precise steering feedback. However, Toyota cars are quieter than Honda cars and often provide a luxury car feel. 4. The Honda logo is a capital 'H,' the first letter of HONDA, while the Toyota logo consists of symmetrical ellipses forming a horizontal and vertical combination, representing the first letter 'T' of TOYOTA.
7
5
Share

What is the fuel consumption of the Volkswagen Teramont 4WD?

Introduction to the fuel consumption of the Volkswagen Teramont 4WD: 1. The comprehensive fuel consumption of the 2.0T 4WD version of the Teramont is approximately 11 liters per 100 kilometers. 2. The comprehensive fuel consumption of the 2.5T 4WD version of the Teramont is approximately 11.7 liters per 100 kilometers. The following is an introduction to the Volkswagen Teramont: 1. The Teramont is a mid-to-large-sized SUV under the Volkswagen brand. 2. This vehicle is equipped with three types of engines: a low-power version 2.0-liter turbocharged engine, a high-power version 2.0-liter turbocharged engine, and a 2.5-liter turbocharged engine. 3. The model equipped with the low-power version 2.0-liter turbocharged engine is front-wheel drive, while the other two versions are 4WD. 4. The 4WD models use a multi-plate clutch central differential.
7
3
Share

What is the principle of car turning?

Car steering principle mainly involves the steering wheel driving the steering gear, which then activates the rack and pinion steering mechanism. The following are introductions to the steering system and steering gear: Automotive Steering System: The automotive steering system is used to maintain or change the direction of the car's movement or reverse. The automotive steering system is crucial to the safety of the car's operation, hence the components of the automotive steering system are referred to as safety parts. Both the automotive steering system and the braking system are two systems that must be taken seriously for vehicle safety. Types of Steering Gears: There are worm and peg type (WP type), worm and roller type (WR type), recirculating ball type (BS type), and rack and pinion type (RP type). These four types of steering gears have been widely used in automobiles. Due to the various advantages of the rack and pinion steering gear, its application in small vehicles (including small passenger cars, light trucks, or multi-purpose vehicles) has developed by leaps and bounds; while large vehicles mainly use the recirculating ball steering gear as the primary structure.
18
4
Share

What brand of brake fluid does Mercedes-Benz use?

It depends on the specific model. For example, the Mercedes-Benz C-Class uses genuine Mercedes-Benz (Benz) brake fluid, with the model number DOT4A000989080713. Introduction to Brake Fluid: There are three types of brake fluid. When purchasing, choose a reliable manufacturer, and the higher the grade, the better. The working pressure of brake fluid is generally 2MPa, and can reach up to 4~5MPa. All liquids have the characteristic of being incompressible. In a sealed container or a pipeline filled with liquid, when the liquid is under pressure, it quickly and evenly transmits the pressure to all parts of the liquid. Hydraulic braking works based on this principle. Advantages of Silicone Brake Fluid: Saves long-term maintenance costs. Since silicone oil does not absorb water, it prevents the accumulation of moisture or the dissolution of oxidants that could corrode metal parts. The non-conductive nature of silicone oil also prevents electrolytic corrosion. Therefore, the hydraulic braking system does not require major overhauls or part replacements. Additionally, due to the inherent stability of silicone oil, frequent updates are unnecessary.
5
3
Share

What Are Some Summer Car Maintenance Tips?

Here are some summer car maintenance tips: Check the tire pressure once a week. Tire pressure is one of the most easily overlooked aspects of maintenance, yet it is extremely important. Low tire pressure accelerates tire wear, while high tire pressure can damage the tires when driving over rough terrain. Regularly inspect the cooling system. Ensure the engine radiator has sufficient coolant. First, check for any leaks caused by damaged hose connections, and the same applies to the radiator tubes. Promptly visit an auto repair shop to fix any issues to prevent engine overheating and potential damage. Monitor the temperature gauge. The temperature gauge displays the engine coolant temperature. It has two symbols: if the needle points to 'C,' it means the coolant temperature is at 60°C; if it points to 'H,' it indicates 110°C, which is dangerous. Replace filters regularly. The three filters that need replacement are the fuel filter, oil filter, and air filter.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.