What are the consequences of inserting a steel wool ball into a car?

1 Answers
Vickie
07/30/25 8:00am
The consequences of inserting a steel wool ball into a car can lead to poor exhaust flow and reduced power during high-speed driving. The reasons are as follows: 1. The exhaust pipe is designed to reduce vibration and noise, facilitate installation, and extend the lifespan of the exhaust muffler system. It is installed between the engine exhaust manifold and the muffler, providing a flexible connection for the entire exhaust system. 2. If the exhaust outlet is blocked by a steel wool ball, the cylinder pressure in the car will increase. Over time, this can reduce the engine's lifespan. 3. Since the combustion of the air-fuel mixture in the engine cylinders produces exhaust gases and noise, mufflers and air purifiers are installed. Some vehicles also add turbochargers at the exhaust pipe location to increase horsepower. To minimize exhaust resistance, the exhaust pipe outlet is typically positioned at the lower part or rear of the car.
Was this review help?
8
2
Share
More Forum Discussions

How to Open the Fuel Tank Cap of the Sylphy?

Sylphy fuel tank cap opening method: 1. The fuel tank cap switch can be found on the driver's side; 2. The switch button is located below the steering wheel, with the fuel tank cap switch positioned on the left side; 3. The fuel tank cap is not a sensor-type switch and can only be opened manually. The Sylphy is a compact car with body dimensions of 4641mm in length, 1815mm in width, and 1447mm in height. In terms of power, the Sylphy is equipped with a 1.6-liter naturally aspirated engine, delivering 139 horsepower and a maximum torque of 169 Nm, with the maximum torque speed at 4000 rpm and the maximum power speed at 6300 rpm.
16
1
Share

How to Set Cruise Control on BMW X1?

BMW X1 cruise control method is: 1. After starting the vehicle, press the I0 button to activate the system standby mode; 2. Press again when the speed exceeds 30km/h to enable cruise control; 3. Accelerate to the desired speed using the accelerator pedal, then press the set button to store the speed; 4. Release the accelerator pedal and the vehicle will maintain the preset speed. The BMW X1 is positioned as an SUV with body dimensions of 4565mm in length, 1821mm in width, and 1620mm in height, with a wheelbase of 2780mm. In terms of appearance, the BMW X1's headlight group has improved visual effects, and the addition of spoon-shaped LED daytime running lights gives it a sharper look.
4
4
Share

How to Replace the Remote Key Battery for Dongfeng Kia K5?

Dongfeng Kia K5 remote key battery replacement method is as follows: 1. There is a key symbol button on the side of the car key. Press this button with your left hand and pull out the mechanical car key with your right hand; 2. At the end of the car key marked with the word "open", insert a flat-head screwdriver into the "open" position; 3. Open the car key, locate the battery position, and then replace it with a new battery. The Dongfeng Kia K5 is a mid-size car with body dimensions of 4980mm in length, 1865mm in width, and 1445mm in height. In terms of power, the Dongfeng Kia K5 is equipped with a 2.0L naturally aspirated engine and a 1.6T turbocharged engine.
1
3
Share

Where is the cabin air filter located in the BMW 5 Series?

The cabin air filter in the BMW 5 Series is located in the engine compartment, adjacent to the hood support rod. The recommended replacement interval for the cabin air filter is every 10,000 kilometers or six months. In areas with severe haze conditions, it is advisable to replace the filter every three months. The replacement cycle should be determined based on the external environment. The BMW 5 Series is a premium sedan with body dimensions of 4998mm in length, 1901mm in width, and 1559mm in height. In terms of powertrain, the BMW 5 Series is equipped with a 3.0-liter inline six-cylinder turbocharged engine, delivering a maximum power output of 225 kW and a peak torque of 400 Nm. The engine reaches its maximum power at 5800-6000 rpm and achieves peak torque between 1200-5000 rpm.
17
0
Share

How to Calculate Vehicle Purchase Tax in 2021?

2021 vehicle purchase tax calculation formula is: Tax payable = Taxable vehicle's taxable price * Tax rate. Below are relevant considerations: 1. Calculation based on "total price including tax": Purchase tax = Total price including tax ÷ 1.13 × 10% (current automobile VAT rate is 13%). 2. Calculation based on "tax-exclusive price": Purchase tax = Tax-exclusive price × 10%. 3. Tax-exempt vehicles transferred require tax repayment: According to Article 14 of the Purchase Tax Law: For tax-exempt or tax-reduced vehicles transferred or repurposed, taxpayers shall pay vehicle purchase tax before completing vehicle transfer registration or modification registration. The taxable price shall be based on the taxable price determined during the initial tax declaration of the tax-exempt or tax-reduced vehicle, with a 10% deduction for each full year.
12
0
Share

How to prevent theft of external tire pressure monitoring?

External ones have poorer anti-theft performance, but there are now anti-theft nuts that require specialized removal wrenches for installation and removal. Tire pressure monitoring does not function in real-time. If there is an abnormality in the tire, the dashboard will automatically display a message. The display does not show specific values, only indicating which tire has an issue. The working principle of tire pressure monitoring is: It uses pressure sensors installed in the tires to measure the tire pressure and wireless transmitters to send the pressure information from inside the tire to a central receiver module. Methods to eliminate tire pressure alerts: There is a tire monitoring indicator button on the central console. After the system issues a low tire pressure warning, the car must remain stationary for about a minute. Do not move the car or turn off and restart the ignition until the button is pressed to recalibrate the tire monitoring indicator. Find the tire pressure reset option in the settings on the central display. If none of the above works, you will need to go to a 4S shop to eliminate the tire pressure alert. What to do if tire pressure is insufficient: If no damage is visible, you can simply inflate the tire to normal pressure and reset the tire pressure system. If a puncture is found upon inspection, drive to a tire shop promptly for a repair, then reinflate the tire. If the tire pressure alert reappears some time after inflation but there is no puncture, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the rim and replace it if necessary.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.