What are the consequences if a driver's license expires and is not renewed?

1 Answers
WillowLynn
07/25/25 9:04am
Here are the specific consequences of driving with an expired license: 1. Illegal to drive: The vehicle cannot be legally driven on the road. If stopped by traffic police and found with an un-renewed license, the driver will face fines or vehicle impoundment. 2. Fines: If caught driving with an expired license, the driver will receive 3 demerit points and a monetary penalty. 3. Full liability in accidents: In case of a traffic accident, the driver will bear full responsibility and insurance will not provide coverage. 4. Mandatory scrapping: If the vehicle fails three consecutive annual inspections after the license expiration, it will be subject to compulsory scrapping.
Was this review help?
20
4
Share
More Forum Discussions

Is synthetic oil better or semi-synthetic oil better?

Synthetic oil and semi-synthetic oil are defined as follows: 1. Semi-synthetic oil: Semi-synthetic oil uses semi-synthetic base oil, which is a lubricant formulated from Group III base oils internationally. It is a product refined from mineral oil through hydro-cracking technology, with purity very close to that of full synthetic oil, making it an ideal transitional product from mineral oil to synthetic oil. 2. Synthetic oil: Synthetic oil is 100% made from PAO (polyalphaolefin) or high-quality oil artificially formulated. Its advantages include excellent stability, better lubrication effect under the same grade, and a longer service life. Due to the superior stability and fluidity of synthetic oils, they perform exceptionally well in both cold starts during winter and high-temperature resistance in summer. Additionally, with their extended service life, they provide the best possible protection for the engine.
9
1
Share

What are the symptoms of a blown head gasket?

A blown head gasket can exhibit the following symptoms: 1. Insufficient engine power: If the head gasket is damaged between two cylinders, the engine will lack power, resulting in poor vehicle acceleration and performance. When removing the air filter, a 'popping' abnormal noise can be heard from the intake pipe during engine idle. 2. Blue smoke from the exhaust: If the damaged area of the head gasket connects to the oil passage, some engine oil may flow into the cylinder and burn, causing blue smoke to emit from the exhaust pipe. 3. Bubbles and boiling in the radiator: If the damaged area of the head gasket connects to the water jacket, bubbles and boiling may occur in the radiator, accompanied by white smoke from the exhaust pipe. 4. Abnormal noises from the head gasket: If the damaged area of the head gasket connects to the external atmosphere, the engine's performance and fuel efficiency will deteriorate, and a loud 'popping' noise can be heard from the damaged area.
16
4
Share

What does AC in car air conditioning mean?

AC in car air conditioning refers to the cooling switch of the vehicle's air conditioning system. When AC is turned on, the car's compressor activates, and the air blown by the air conditioner is cold. If AC is not turned on, the compressor remains off, and the air blown is natural air. AC stands for 'air conditioner,' which can also be understood as cold air. The AC switch controls the electromagnetic clutch. For the car's compressor to operate, the electromagnetic clutch must be engaged by pressing the AC button when the system is powered. Function and principle of the AC button: When AC is turned on, the car's compressor activates, and the air blown by the air conditioner is cold. If AC is not turned on, the compressor remains off, and the air blown is natural air. The AC switch controls the electromagnetic clutch. For the car's compressor to operate, the electromagnetic clutch must be engaged by pressing the AC button when the system is powered. This way, the car's compressor starts working, and the air blown is cold. Precautions for using car air conditioning: Turn off AC during startup and rapid acceleration; do not set the air conditioning temperature too low—maintain a difference of 5 to 6 degrees between the interior and exterior temperatures. Based on the principle that cold air sinks and hot air rises, when controlling the air vents, direct them upward when cooling and downward when heating.
4
0
Share

How to Reset the Maintenance Light on Audi Q3?

Audi Q3 maintenance light reset method is: 1. Press and hold button a on the right side of the instrument panel, turn the ignition switch to ON; 2. When "service" appears on the LCD display, release button a; 3. Press button b on the left side of the instrument panel to reset and display "service in 10000 mi"; 4. Turn off the ignition switch. The Audi Q3 is a compact 5-door, 5-seat SUV with body dimensions of 4481mm in length, 1848mm in width, and 1616mm in height, with a wheelbase of 2680mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm.
4
2
Share

What engine does the BMW 330i use?

The BMW 330i is equipped with a B48 2.0T inline four-cylinder turbocharged engine, paired with an 8-speed automatic manual transmission. It delivers a maximum power of 190 kW, with the power peak occurring between 5,000 and 6,500 rpm. The maximum torque is 400 Nm, available from 1,550 to 4,400 rpm. The BMW 330i is a mid-sized four-door, five-seater sedan with body dimensions of 4,719 mm in length, 1,827 mm in width, and 1,459 mm in height, and a wheelbase of 2,851 mm. It features rear-wheel drive with a front suspension that uses a double-joint spring strut front axle and a multi-link independent rear suspension.
7
3
Share

Does the BYD Han DM need to be charged every day?

BYD Han DM does not need to be charged every day. The specific charging interval depends on the daily mileage. Charging time for BYD Han DM: If using a 220V household power supply, it takes about 9 hours to fully charge, consuming approximately 15 kWh. At a professional charging station, it takes 15 to 30 minutes. According to preliminary data, charging the BYD Han for 10 minutes can provide a range of 135 km, and charging from 30% to 80% takes only 25 minutes. Pure electric range of BYD Han DM: Based on the product specifications of BYD Han and Tang models, the Han DM-i has a maximum pure electric range of 242 km, with a battery capacity of 37.6 kWh. The Tang DM-i, on the other hand, has a maximum pure electric range of 252 km, with a blade battery capacity of 45.6 kWh. Exterior design of BYD Han: The BYD Han features a 4-door sedan body design, with a front face adopting the Dragon-Face family design language. The LED headlights on both sides shine brightly when turned on, and the center of the front face bears the Chinese character 'Han' as its logo.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.