What are the conditions for the Hangzhou license plate lottery?

1 Answers
MacOlive
07/25/25 3:34pm
Hangzhou license plate lottery conditions are: 1. Local household registration; 2. Hold valid identification and have continuously resided in the city for more than two years; 3. Hold a valid motor vehicle driver's license; 4. No passenger car registered in the city under the applicant's name. For non-local residents, the license plate lottery conditions are: 1. No valid quota held under the applicant's name and no eligibility to apply for a quota update; 2. No overdue unused lottery quota in the past two years; 3. Residence in the city with a valid Zhejiang Province Talent Residence Permit, Zhejiang Residence Permit, or Zhejiang Temporary Residence Permit, and having purchased social insurance in the city for more than two years; 4. Hold a valid motor vehicle driver's license; 5. No locally registered vehicle under the applicant's name.
Was this review help?
6
1
Share
More Forum Discussions

What is the function of adding urea to trucks?

Trucks add urea, which reacts with nitrogen oxides emitted by diesel engines. It converts nitrogen oxides into nitrogen and water, both of which are harmless to the atmosphere and human health. Urea is used specifically for diesel engines because they emit nitrogen oxides, a polluting gas, during operation. To reduce the harm of these gases to the atmosphere and humans, urea is employed. Additional information is as follows: 1. Household cars: Most household cars today are equipped with gasoline engines, which use a three-way catalyst to address exhaust issues. The three-way catalyst is a precious metal that converts exhaust gases from gasoline engines into nitrogen, so most household cars do not require urea. 2. Regular urea replenishment: Regardless of the engine type, there is a specialized device, similar to a container, that holds either urea or a three-way catalyst. For diesel engines, as the vehicle operates, it continuously emits nitrogen oxides while consuming urea, so urea needs to be replenished regularly. 3. Consequences of not adding urea: The power and fuel consumption of diesel vehicles are affected by urea. If a diesel vehicle does not have this exhaust treatment device or uses inferior products, it can cause the engine to automatically reduce speed and negatively impact the catalyst in the SCR catalytic reaction tank. Damage to the exhaust treatment device can be troublesome to repair, not only affecting the environment but also incurring high repair costs.
15
0
Share

Can Vehicle Inspection Be Conducted in Another Location?

Except for large passenger buses and school buses, which cannot be inspected in another location, all other vehicles can undergo inspection in a different location. Starting from September 1, 2018, cross-province inspection for small cars, trucks, and medium-sized buses has been fully implemented. Applicants can directly inspect their vehicles in provinces other than where the vehicle is registered and obtain the inspection qualification mark without needing to go through the entrustment inspection procedure. Vehicles that fail to undergo annual inspection on time are not allowed on the road. Driving a vehicle without timely annual inspection will result in 3 penalty points and a fine. If an accident occurs involving a vehicle that has not undergone annual inspection, the party involved will bear full or primary responsibility, and the insurance company will not compensate. Driving without timely annual inspection is considered illegal driving and may result in vehicle impoundment. According to the 'Mandatory Scrapping Standards for Motor Vehicles,' if a vehicle fails to obtain the inspection qualification mark for three consecutive inspection cycles after the expiration of the inspection period, it will be forcibly scrapped. Annual inspection procedures: First, after submitting the inspection application, the vehicle undergoes an online inspection. The vehicle is driven into the automatic inspection area to sequentially check whether the exhaust emissions, speed, lights, side slip, and chassis meet the standards. Only if all items pass can the vehicle proceed. Next is the appearance inspection, verifying the correctness of the vehicle's license plate, type, body color, engine number, VIN code, and frame number. Then, the vehicle body appearance is inspected, including details such as the bumper, engine compartment, rearview mirrors, lower mirrors, window glass, paint, engine operation condition, and the interior and wheels of passenger vehicles. Finally, the owner can obtain the inspection report and application form from the inspector. If all inspection items pass, the owner can proceed to pay the inspection fee and collect the vehicle license and qualification label. If any items fail, the owner must repair the vehicle and undergo re-inspection until all items pass before proceeding with the visa procedures.
1
2
Share

Will points be deducted for the car body sweeping the line in an S-curve?

Sweeping the line with the car body in an S-curve does not result in point deduction. Below are the precautions and techniques for entering a curve when driving: Precautions for turning a car: Do not make sharp turns when the engine is near the turning point. When the bumper aligns with the protrusion, quickly turn the steering wheel to the left or right to the limit position. Do not press the accelerator pedal. Observe whether you can pass ahead. If you are unsure or uncertain about the angle at the corner, you can stop and check in advance. Always pay attention to the movement of the body and changes in the steering wheel position. Techniques for entering an S-curve: When the vehicle approaches the entrance of the curve, it should be placed in the middle of the road. When entering the curve, the vehicle should stay as close as possible to the straight line on the right side. When the gap on the left side of the car's hood aligns with the right yellow line, steer to the left. When making the first right turn in the curve, steer to the right. Before entering the S-curve, do not look at the arrows on the ground. Position the entire car body in the middle of the S-curve, then proceed straight in.
6
4
Share

What is the tire pressure range for the Cadillac CT5?

The normal tire pressure range for the Cadillac CT5 is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. To check the current tire pressure of the Cadillac CT5 during daily driving, you can activate the tire pressure monitoring system, and the tire pressure values will be displayed on the central LCD screen of the instrument panel. The specific method is to use the selection buttons on the steering wheel to find the "Tire Pressure" option on the instrument display screen, where you can view the specific tire pressure values. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causing steering wheel vibration and deviation, reducing driving comfort; accelerating wear on the central tread pattern of the tire, shortening tire lifespan; increased body vibration, indirectly affecting the lifespan of other components; excessive stretching deformation of tire cords, reducing tire elasticity, and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causing heavy steering and deviation, posing safety risks; increased movement of tire parts, leading to abnormal heat generation due to excessive rolling; reduced functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the tire bead area and causing abnormal wear; multiplied friction between the tire and the ground, sharply increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no seal on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually, an alarm is triggered when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator light to come on. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it will also cause the tire pressure warning light to come on. For sensor damage, the only solution is to replace it with a new component.
16
3
Share

Why is the engine warning light on in the FAW J6P?

The engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, triggering the warning light. Fuel quality issues: Failure to use the manufacturer-recommended fuel and engine oil may cause engine wear, leading to the warning light activation. Poor combustion mixture: Incomplete combustion can cause engine carbon buildup or knocking. When detected by oxygen sensors and reported to the ECU, the warning light will illuminate. Causes include faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines. Turbocharger issues: Problems with the intake boost piping or turbocharger can trigger the warning light. The most common issue is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black exhaust smoke. Intake problems: Air intake issues may lead to engine pipe blockages, potentially triggering the warning light. A dirty air filter that hasn't been regularly cleaned can cause intake problems. Exhaust system issues: Exhaust faults can also activate the warning light. Common causes include rear oxygen sensor failure, catalytic converter problems (most frequent), or faults in the exhaust camshaft and bearings. Using leaded gasoline, lead/silicon-containing lubricant additives, physical damage to the catalytic converter, or fuel system failures can all contribute to catalytic converter issues. Anti-theft system malfunction: If the electronic anti-theft system fails or the anti-theft controller doesn't match the engine ECU, the system may prevent normal engine operation while illuminating the warning light. When the engine warning light comes on, follow these steps: First check if the engine is running normally. If there's shaking, black smoke, or other abnormalities, avoid restarting the engine. Note: Never restart if the red warning light is on. If the engine can start, turn it off for 5-10 minutes. Then without pressing the brake, press the start button or turn the key halfway to the ON position (without depressing the clutch). The vehicle will perform a self-check for 5-10 seconds - observe if the warning light turns off. If the light remains on, visit a service station promptly. Technicians can use diagnostic tools to read trouble codes, identify the issue, and perform targeted repairs.
20
1
Share

What engine does the Geely Xingyue L use?

Geely Xingyue L uses three types of engines, with the model numbers being DHE15-ESZ, JLH-4G20TDJ, and JLH-4G20TDB. The DHE15-ESZ engine has a maximum horsepower of 150 hp, a maximum power output of 110 kW, and a peak torque of 225 N·m. The JLH-4G20TDJ engine delivers a maximum horsepower of 218 hp, a maximum power output of 160 kW, and a peak torque of 325 N·m. The JLH-4G20TDB engine boasts a maximum horsepower of 238 hp, a maximum power output of 175 kW, a maximum power speed of 5500 rpm, and a peak torque of 350 N·m. The engines in the Geely Xingyue L are produced by Volvo and are based on models developed using the CMA architecture. Other models that also belong to the CMA architecture include Volvo's 40 series vehicles, XC40, and Lynk & Co 01/02/03, among others. For daily maintenance of the Geely Xingyue L's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD-SF grade gasoline engine oil should be selected based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, CB-CD grade diesel engine oil should be chosen according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any lubricating oil will change during use. After a certain mileage, its performance deteriorates, leading to various engine problems. To avoid malfunctions, the oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.